Vehicle
88 recalls affect this vehicle. Sorted by severity, then date.
Altec Industries is recalling 2010-2011 Aerial Devices because an incorrectly installed battery fuse block may leave the battery cable unprotected, increasing the risk of a fire.
Altec is recalling 2025-2026 Digger Derrick and Aerial Device vehicles because improperly installed front-end radar may cause unexpected brake activation, increasing crash risk.
Altec is recalling certain 2011-2025 Aerial Device, Digger Derrick and Service Body vehicles because the cable step wire rope assembly may be improperly secured, allowing the entry step to detach.
Altec is recalling 2024-2025 Aerial Device and Digger Derrick vehicles because front winch bumpers may be secured with incorrect bolts, posing a crash and injury risk.
Altec is recalling 2014-2016 AT200A aerial devices because cracks in the mounting frame legs may cause the side plate to break, increasing injury risk.
Altec is recalling certain 2020-2024 LR7 and LR8 aerial devices because a hydraulic cylinder feeder tube may become damaged and leak oil, which can result in uncontrolled boom movement.
Altec is recalling 2019-2022 AT335 aerial devices because an inverter-powered outlet may lack ground-fault protection, increasing the risk of injury or fire.
Altec is recalling 2019-2022 AT41ME aerial devices because the material handling interlocking valve may lose power, allowing the jib winch to operate while outriggers are up, which increases the risk of the unit tipping.
Altec is recalling 2018-2021 Aerial Devices and Digger Derricks because cracks in the subbase bulkhead plate can cause shear plate failure, increasing the risk of injury.
Altec Industries is recalling 2017-2021 aerial devices because incorrect hydraulic plumbing could allow booms to overextend, increasing the risk of tipping and injury.
Altec is recalling 2011-2016 AT200A aerial devices because cracks in the mounting frame legs may cause the side plate to break, increasing injury risk.
Altec Industries is recalling 2021 AM50, 55, and 60E aerial devices because improperly machined cylinder rod threads may cause uncontrollable boom movement, increasing injury risk.
Altec is recalling 2020-2021 AT200A, AT235, and AT235P aerial devices because insufficient strength bolts may fail, causing the pedestal to separate and increasing the risk of injury or death.
Altec is recalling 2017-2018 aerial devices because rotation bearing fasteners may crack and break, potentially causing the pedestal and turntable to separate.
Altec is recalling 2018-2020 digger derricks and aerial devices because a hydraulic check valve snap ring can fail, causing unintended boom movement.
Altec is recalling 280 units of 2019-2020 aerial devices and digger derricks because bolts securing the pedestal to the turntable may fail, posing a risk of injury or death.
Altec is recalling 2017-2020 aerial devices due to a power take-off that may leak oil onto the exhaust heat shield, increasing fire risk.
Altec is recalling 2018-2020 aerial devices and digger derricks because bolts securing the pedestal to the turntable may fail, increasing the risk of injury or death.
Altec Industries is recalling 2018-2019 aerial devices that were not stability tested according to ANSI A92.2 standards, posing a risk of collapse.
Altec is recalling 2012-2019 aerial devices because a winch valve defect may allow lifting beyond rated capacity, increasing injury risk.
Altec Industries is recalling 2018-2019 aerial devices because high-strength fasteners may fail, potentially causing the pedestal to separate from the turntable.
Altec Industries is recalling 2017-2019 LS60 Aerial Devices because they may not meet stability requirements, creating a risk of overturning and injury.
Altec is recalling 2018-2019 aerial devices because high-strength fasteners securing the pedestal to the turntable may fail, increasing the risk of injury or death.
Altec is recalling 2003-2019 aerial devices due to potential air brake pressure loss. Owners should contact dealers for free inspection and repair.
Altec is recalling 2017-2018 aerial devices because fasteners securing the rotation bearing may break, potentially causing the pedestal to separate from the turntable.
Altec is recalling 2016-2019 LR7 Series Aerial Devices because they can operate without rear outriggers, creating a risk of collapse and injury.
Altec is recalling 2017-2018 aerial devices because turntable fasteners may fail, potentially causing the pedestal and turntable to separate.
Altec is recalling 2017 AT37, AT41, and AT48 aerial devices because loose or missing fasteners may cause the pedestal to separate, increasing injury risk.
Altec is recalling 186 aerial devices from 2017-2018 because under-hood wiring may be damaged by sharp edges, increasing the risk of a fire.
Altec Industries is recalling 2009 LSS 60 and LSS 70 Elevator Aerial devices because the elevator riser assembly may crack and fail, increasing the risk of injury or death.
Altec is recalling 2018 Digger Derricks and Aerial Devices because high-strength fasteners may fail, causing the pedestal to separate from the turn table and increasing injury risk.
Altec is recalling 2015-2017 TA45M and AM50/55 aerial devices because a faulty DC-DC converter can cause a fire.
Altec Industries is recalling 2018 cranes, digger derricks, and aerial devices because overtightened fasteners may break, potentially causing the platform to separate from the vehicle.
Altec Industries is recalling 2008-2018 Aerial Devices with aluminum work platforms because mounting holes may fail, causing unexpected movement and injury risk.
Altec is recalling 290 2016-2017 Aerial Devices and Service Bodies because a battery bracket may cause an electrical short, increasing fire risk.
Altec is recalling 153 2017 aerial devices because high-strength fasteners may corrode and fail, potentially causing the pedestal to separate from the vehicle.
Altec Industries is recalling 2004-2005 aerial devices and elevator vehicles because the fiberglass upper boom may degrade and fail, increasing the risk of injury or death.
Altec is recalling 2017 AT Aerial Devices on Ford F-550 chassis because a circuit breaker may contact the hood, potentially causing an electrical short and fire.
Altec is recalling 2011-2017 LS63 Aerial Devices because the jib mast may bend under load, increasing the risk of injury to nearby individuals.
Altec is recalling 2004-2005 aerial devices and elevators because the fiberglass upper boom may fail without warning, increasing the risk of serious injury or death.
Altec is recalling 2015-2016 Aerial Devices and Service Body Trucks due to a wiring defect that may cause a short circuit and increase fire risk.
Altec Industries is recalling 2,514 aerial devices from 2006-2015 because the outrigger interlock system may fail to detect proper deployment, risking boom instability and injury.
Altec is recalling 3,889 aerial devices because cylinder lugs may crack, causing unintended boom movement and injury risk.
Altec is recalling 2000-2013 Aerial Devices and Digger Derricks because a battery equalizer component may conduct electricity and cause a fire.
Altec Industries is recalling 1997-2009 aerial devices equipped with a BCM 44B electrical leakage monitoring system. The meter may be incorrectly installed, risking electrical shock or electrocution.
Altec is recalling certain 2023-2025 Aerial Device and Digger Derrick vehicles because the electronic taillight module harness may have inadequate circuit protection.
Altec is recalling 2024-2025 Aerial Devices and Digger Derricks because an overloaded ignition circuit may cause engine shutdown, increasing crash risk.
Altec Industries is recalling certain 2022-2024 Aerial Devices because fuel lines may not be properly secured, potentially causing fuel leaks and fire risk when an ignition source is present.
Altec is recalling 2023-2024 Aerial Device, Digger Derrick, and Pressure Digger vehicles due to an overloaded chassis ignition circuit that can cause engine shutdown and increase crash risk.
Altec is recalling 2023-2024 aerial devices and related truck-mounted equipment due to lighting wire harness overload that may prevent vehicle lights from illuminating, reducing visibility to other drivers and increasing the risk of crashes.
Altec is recalling certain 2004-2023 AT Series aerial devices because cables in the engine compartment may contact the hood, damaging the cables and causing a short circuit that increases fire risk. Free repair available through Altec.
Altec is recalling certain 2021-2023 aerial devices with Bobcat welders that may be misaligned, allowing fasteners to loosen and the welder to detach, becoming a road hazard and increasing crash risk.
Altec is recalling certain 2022-2023 Digger Derricks and Aerial Devices due to missing circuit breakers on AC power inverters, which could cause electrical fires. Altec will install the circuit breaker free of charge.
Altec is recalling 2020-2023 aerial device trucks due to collision mitigation system software that may not be calibrated correctly, preventing the active braking system from activating. This increases the risk of a crash.
Altec is recalling 2021-2023 aerial devices, digger derricks, and related equipment because water can leak into strobe lights, causing electrical short-circuits that increase fire risk. No injuries have been reported.
Altec is recalling 2016-2022 digger derricks and aerial devices because a missing weld on the rear pole rack could cause the pole to drop, increasing injury risk.
Altec Industries is recalling 2015-2022 DT65 and DT85 Aerial Devices because a weld crack could cause the auger bracket to detach, increasing injury risk.
Altec is recalling 2017-2021 aerial devices because a wire may be damaged by a sharp edge, potentially causing an engine stall and increasing crash risk.
Altec is recalling 2017-2021 SK185-MP and SKC landscaping spray vans because they lack carbon monoxide detectors, increasing the risk of injury from undetected gas.
Altec is recalling 2016-2021 aerial devices because improperly secured fuel line clamps may cause leaks and increase fire risk.
Altec is recalling 2019-2021 ATTXX-M/P/S aerial devices because over-tightened bolts in the rotation bearing may break, risking separation of the pedestal and turntable.
Altec is recalling 2021 AH125 aerial devices because a defective component may cause the boom to move unexpectedly, increasing injury risk.
Altec is recalling 2017-2021 LS60 aerial devices because bearing bolt washers may interfere with welds, causing bolts to break and increasing injury risk.
Altec is recalling 2012-2016 AT200A aerial devices because cracks in the mounting frame legs may cause the side plate to break, increasing injury risk.
Altec is recalling 2016-2021 LS87 aerial devices because bearing bolt washers may interfere with welds, causing bolts to break and increasing injury risk.
Altec is recalling 2005-2021 aerial devices because boom spools can shift, increasing injury risk. Owners should contact Altec for free repairs.
Altec is recalling 213 digger derricks from 2016-2020 that lack the required combined use capacity chart, posing an injury risk to operators.
Altec is recalling 2020 AN67-E100 aerial devices because a shuttle cartridge was installed instead of a plug, risking unintended boom movement and injury.
Altec is recalling 2015-2018 aerial devices because a software issue can cause the boom to move unexpectedly during an engine cycle, increasing injury risk.
Altec Industries is recalling 1995-1998 A0442 aerial devices because a hydraulic cylinder end gland may fail, causing uncontrolled boom movement and increasing injury risk.
Altec is recalling 2014-2020 Aerial Devices with Class 3 towing hitches that may have incorrect load ratings or damage from overloading, increasing crash risk.
Altec Industries is recalling 2019 LR7-Series aerial devices because the trailer brake controller may be improperly grounded, increasing crash risk.
Altec is recalling 2017-2018 Aerial Devices, Service Bodies, and Digger Derricks because Whelen accessory brake lights may illuminate without the brake pedal being pressed.
Altec is recalling 2017-2018 aerial devices and digger derricks because a step on the fiberglass platform can break off, increasing injury risk.
Altec is recalling 2017 AT37, AT41, and AT48 aerial devices because an incorrectly installed hose sock may cause electrical shock.
Altec is recalling 2017-2018 LS63 Aerial Devices because an incorrectly placed battery fuse may increase the risk of an electrical short and fire.
Altec is recalling 2016-2017 Aerial Devices and Digger Derricks because improperly sized cable connection receptacles may cause the high voltage grounding system to fail, increasing the risk of injury.
Altec is recalling 2012-2018 aerial devices missing a placard stating maximum towing limits, which could lead to an overloaded receiver tube and increased crash risk.
Altec is recalling 2017 TA48S aerial devices because the travel height may exceed the decal indication, increasing crash risk.
Altec Industries is recalling 1997-2017 aerial devices because a platform leveling yoke may fail, potentially causing occupants to fall.
Altec is recalling 1995-1999 Aerial Device trucks because a boom lift cylinder defect could cause uncontrolled movement, increasing injury risk.
Altec is recalling 219 model year 2014-2015 aerial devices because an improperly sized boom tip cover opening may allow contact with energized conductors, increasing injury risk.
Altec is recalling 252 model year 2015-2016 Aerial Devices and Digger Derricks because a hydraulic motor shaft may fail, causing unexpected winch movement and increasing injury risk.
Altec is recalling 2014 Aerial Devices because a counterbalance valve may crack, causing hydraulic leaks and unintended boom movement that increases injury risk.
Altec is recalling 2012-2014 Digger Derrick and Aerial Device vehicles mounted on Freightliner chassis because a slow-reacting circuit breaker may cause overheating and fire.
Altec is recalling 1999-2014 aerial devices because an improperly set hydraulic pressure transducer may cause inadvertent boom movement in cooler temperatures, increasing injury risk.
Altec is recalling certain 2023-2026 Service Body, Aerial Device, Pressure Digger, Spray Truck and Digger Derrick vehicles because the low tire pressure rating printed on the final stage certification label is incorrect.
Altec is recalling certain 2022-2025 Aerial Device, Forestry Body, Service Body and Digger Derrick vehicles because the Gross Axle Weight Rating on the certification label may be incorrect.