Vehicle
41 recalls affect this vehicle. Sorted by severity, then date.
Mack Trucks is recalling 2015 Pinnacle (CXU) vehicles because front steer axles may have missed a heat-treating step, potentially causing them to fracture and leading to a loss of vehicle control.
Mack Trucks is recalling certain Pinnacle and Anthem vehicles because undersized air brake supply tanks may reduce braking performance and increase crash risk.
Mack Trucks is recalling 2018 Anthem, Granite, and Pinnacle trucks because an electrical overload may cause the light control module to fail, potentially disabling exterior lights and windshield wipers.
Mack is recalling 2016 Pinnacle CHU and CXU diesel trucks because improperly torqued steer axle components may allow the tie rod to loosen, potentially causing a complete loss of steering.
Mack is recalling certain 2012-2017 trucks because front wheel hubs may fail, potentially causing loss of vehicle control or dropped parts.
Mack Trucks is recalling 57 model year 2017 Pinnacle CHU and CXU trucks because improperly cured tires may cause partial tread separation, increasing crash risk.
Mack Trucks is recalling 2013 Pinnacle (CXU) trucks because improperly heat-treated front axles may fracture, increasing the risk of a crash.
Mack Trucks is recalling 33,981 model year 2012-2016 trucks because a cap nut may loosen, causing the driveshaft to disconnect and increasing crash risk.
Mack is recalling 2011-2014 Pinnacle trucks because the fifth wheel locking mechanism may fail, risking trailer detachment and a crash.
Mack is recalling 2013-2015 Pinnacle trucks because incorrectly mounted brake chambers may contaminate calipers, increasing stopping distance and crash risk.
Mack is recalling 2012-2015 Pinnacle trucks because the fifth wheel latch switch may be pushed accidentally, causing the trailer to disconnect.
Mack is recalling 2014-2015 Pinnacle trucks because a smaller air reservoir may increase stopping distance, raising crash risk.
Mack is recalling 2015-2016 CXU and LEU trucks due to a parking brake defect that may cause brake drag and fire.
Mack Trucks is recalling 2015 Pinnacle and Granite trucks because an incorrectly wired system may fail to control engine speed, increasing the risk of fire.
Mack is recalling 1,048 model year 2015 CHU and CXU trucks because incorrectly positioned tie rod collars may allow ball sockets to come loose, risking loss of steering.
Mack is recalling 2014-2015 Pinnacle trucks because a missing pressure relief valve could cause the air tank to rupture, increasing injury risk.
Mack Trucks is recalling certain 2010-2015 models because condensation in the intake manifold may freeze, causing sensor issues that could lead to vehicle fires or burn injuries.
Mack Trucks is recalling 70,208 vehicles from model years 2007-2015 because water leaks may contaminate the Electronic Power Distribution Module, increasing the risk of a fire.
Mack is recalling 2014 Pinnacle CXU tractors because an incorrectly wired over-speed protection system may fail to shut down the engine, risking fire.
Mack Trucks is recalling 1,155 model year 2013-2014 vehicles because axle spindle nuts may loosen, potentially causing the hub assembly to separate and increasing crash risk.
Mack Trucks is recalling 2014 Pinnacle and Granite models because steering shaft bolts may not be torqued correctly, risking loss of steering control.
Mack Trucks is recalling 5,203 model year 2013-2014 trucks because a missing cotter pin may cause brake failure on one wheel.
Mack Trucks is recalling 2011-2013 Pinnacle CXU trucks because a parking brake leak may cause overheating and fire.
Mack Trucks is recalling 2011-2012 Pinnacle CXU trucks because the fifth wheel lock may not fully engage, potentially allowing a trailer to detach.
Mack Trucks is recalling 475 heavy trucks from 2010-2011 due to a defective weld on the clutch pedal shaft that could cause loss of vehicle control.
Mack Trucks is recalling 584 model year 2012 trucks because a nonconforming seam weld in the driveline tubing could fracture, potentially disabling the vehicle or causing debris to fall on the roadway.
Mack Trucks is recalling certain 2011-2012 models because defective brake slack adjusters may crack, causing loss of braking and potential crashes.
Mack Trucks is recalling 808 heavy trucks due to fifth wheel bolts that may not be torqued to specification, risking trailer separation.
Mack Trucks is recalling 307 certain 2021-2022 Granite, Pinnacle, and Anthem commercial trucks due to a defective hubcap compression spring that can cause the hubcap to separate, creating a road hazard and increasing crash risk.
Mack trucks (2018-2022) with electronic stability control may drift out of their lane at certain speeds, increasing crash risk. Dealers will reprogram the control units free of charge.
Mack Trucks is recalling 2020 Anthem and Pinnacle trucks because exhaust systems may block rear reflectors, reducing vehicle visibility.
Mack Trucks is recalling 2019-2020 Anthem, Granite, and Pinnacle vehicles because the passenger-side door mirror may detach, posing a risk of injury or crash.
Mack Trucks is recalling 2018 Anthem and Pinnacle vehicles because a clutch component may fail, causing unintended movement and increasing crash risk.
Mack Trucks is recalling 2015 CHU, CXU, and GU trucks because seat belt bolts may not be torqued correctly, risking detachment in a crash.
Mack Trucks is recalling 2013-2015 Pinnacle and 2014-2015 CHU trucks because a software error may prevent the adaptive cruise control system from warning drivers of road obstructions.
Mack Trucks is recalling certain 2007-2014 models because the hazard warning lights may fail, reducing visibility and increasing crash risk.
Mack Trucks is recalling 2010-2015 CXU trucks because exhaust pipes may block rear reflectors, reducing visibility and increasing crash risk.
Mack Trucks is recalling 2014 CXU and MRU trucks because seat belt buckles may fail to release, potentially hindering emergency egress.
Mack Trucks is recalling certain 2012 Granite and Pinnacle trucks because windshield wiper linkage hardware may not be sufficiently torqued, potentially causing wipers to stop functioning.
Mack Trucks is recalling 2010-2011 CXU heavy trucks because improperly rotated rear hold-down brackets may prevent the battery box lid from seating correctly, posing a fall hazard.
Mack Trucks is recalling certain 2011 Pinnacle trucks manufactured in mid-2010 that lack rear mud flap hanger brackets, potentially reducing vehicle visibility.