Manufacturer
69 recalls in our database name Toyota Motor Engineering & Manufacturing as the manufacturing or recalling firm.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Toyota is recalling 2023-2025 Corolla Cross Hybrid vehicles because the pedestrian warning sounds when in reverse may be insufficient. A free software update will address the issue.
Toyota is recalling certain 2023–2026 Prius and Prius Prime models because water may enter the rear door switch, causing an unlocked door to open unexpectedly while driving. This increases injury risk.
Certain 2024-2025 Toyota and Lexus vehicles including GX, UX Hybrid, Mirai, and Land Cruiser Hybrid may not display critical warning lights and indicators due to a software issue. Toyota will provide free software updates beginning July 12, 2026.
Toyota is recalling certain 2026 Corolla vehicles due to missing headlight aim markings that can result in improperly aimed headlights, increasing crash risk and glare for oncoming drivers.
Toyota is recalling certain 2024–2026 Toyota and Lexus vehicles because the load carrying capacity modification label may display inaccurate added weight values. Vehicles with incorrect maximum capacity weight may be overloaded, increasing crash risk.
2024-2025 Toyota Tundra and Tundra Hybrid vehicles with Panoramic View Monitor systems may have rearview cameras that fail to display in reverse, violating Federal Motor Vehicle Safety Standard 111. This defect increases the risk of backing crashes.
Toyota is recalling certain 2025 RAV4 vehicles because the front seat brackets may be welded improperly, which could prevent the seat from adequately restraining an occupant during a crash.
Toyota is recalling 2024 Tundra vehicles with V35A engines due to manufacturing debris that may contaminate the engine and cause main bearing failure, resulting in engine stall and loss of drive power.
Toyota Motor Engineering & Manufacturing is recalling 2022–2026 Toyota, Lexus, and Subaru vehicles with a Panoramic View Monitor system due to a software error that may freeze or blank the rearview camera in reverse, reducing rear visibility and increasing crash risk.
Toyota is recalling certain 2022–2026 Lexus NX, RX, and TX vehicles because the rearview camera image may fail to display when the vehicle is in reverse, reducing rear visibility and increasing crash risk.
Toyota is recalling certain 2025-2026 Lexus LX600 vehicles due to a potential transmission solenoid failure that can damage the transmission, causing loss of drive power or fluid leaks that increase crash and fire risk.
Toyota is recalling 2023 Tacoma, Corolla, and other models with a steering column defect that may deactivate the driver's airbag. The defect could prevent airbag deployment in a crash, increasing injury risk.
Manufacturing debris may contaminate the V35A engine in certain 2022-2023 Toyota Tundra and Lexus LX600 vehicles, causing bearing failure, stalling, and power loss that increases crash risk.
Toyota is recalling certain 2024-2025 Highlander and Highlander Hybrid vehicles because the third row center seat belt roof anchor may have been installed at an incorrect angle, preventing proper occupant restraint during a crash.
The second-row seat backs in certain 2021-2024 Toyota Highlander models may fail to lock into position during adjustment due to defective return springs. This could prevent proper occupant restraint during a crash.
Toyota is recalling approximately 55,405 Camry and Corolla Cross Hybrid vehicles due to a loose inverter bolt that may cause loss of power or fire risk.
Toyota is recalling 2024-2025 Lexus NX vehicles because the head restraints can be unintentionally removed without pressing the lock button. This defect may increase injury risk during a rear-end crash.
Toyota is recalling 2022-2025 Tundra and Tundra Hybrid vehicles because moisture may enter reverse light assemblies, causing the lights to fail and reduce visibility when backing up, increasing crash risk.
Toyota is recalling 381,199 2022–2023 Tacoma vehicles whose axle fasteners may be improperly secured, risking separation and loss of vehicle stability and brake performance. Owners should contact Toyota at 1-800-331-4331 or visit www.nhtsa.gov for repair information.
Toyota is recalling 2024 and 2023 Sequoia Hybrid vehicles with tow hitch covers that may detach from the rear bumper. Detached covers can become road hazards and increase crash risk.
Toyota is recalling 2021-2025 Sienna Hybrid vehicles because the bolts securing third-row seat assemblies may not be properly tightened, potentially failing to restrain occupants during a crash.
Toyota is recalling certain 2023-2025 Crown and related Toyota and Lexus vehicles due to instrument panel software error preventing display of vehicle speed, brake warnings, and tire pressure. Remedy is free software update or component replacement.
Toyota is recalling 2023-2024 Corolla and Corolla Hybrid vehicles due to manufacturing defects that cause the steering intermediate shaft to crack and potentially detach, risking loss of steering control.
Certain 2023-2024 Toyota Camry vehicles have insufficient welds on second-row head restraint brackets, which may fail to properly protect occupants during a crash. Owners should contact Toyota for replacement.
Toyota is recalling certain 2024 Lexus ES vehicles and related models due to incorrect parking assist software that can cause the rearview camera to delay displaying an image after the shifter is placed in reverse.