Manufacturer
203 recalls in our database name Altec Industries, Inc. as the manufacturing or recalling firm.
Of the 203 recalls from Altec Industries, Inc. we have scored against our rubric, 3 (1%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 108 (53%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Altec is recalling 2024-2025 Aerial Device and Digger Derrick vehicles because front winch bumpers may be secured with incorrect bolts, posing a crash and injury risk.
Altec is recalling 2025 AP Series vehicles because brake air line fittings may not be tightened correctly, potentially causing the emergency brakes to engage unexpectedly.
Altec is recalling specific aerial and service trucks because a voltage spike may damage a control module, potentially causing a loss of vehicle control or brake performance.
Altec Industries is recalling certain 2022-2024 Aerial Devices because fuel lines may not be properly secured, potentially causing fuel leaks and fire risk when an ignition source is present.
Altec is recalling 2014-2016 AT200A aerial devices because cracks in the mounting frame legs may cause the side plate to break, increasing injury risk.
Altec is recalling 2024-2025 Digger Derrick vehicles because an improperly seated retaining ring may cause hydraulic pressure loss and unintended boom movement.
Altec is recalling AT200A devices on 2017-2024 Ford E350 chassis due to a front axle defect that may fail at high loads, increasing injury risk.
Altec Industries is recalling 1995-1996 AM and AN aerial devices because a hydraulic cylinder head gland may detach, causing the lower boom to fall.
Altec Industries is recalling 2022-2024 AC series cranes because improperly manufactured outrigger shoes may crack and fail, reducing stability and increasing injury risk.
Altec is recalling 2024 AT200A aerial trucks because inadequate clearance between hydraulic hoses and the engine exhaust manifold may cause overheating and increase fire risk.
Altec is recalling 2023-2024 Aerial Device, Digger Derrick, and Pressure Digger vehicles due to an overloaded chassis ignition circuit that can cause engine shutdown and increase crash risk.
Altec is recalling 623 units of 2024 spray trucks and aerial devices because fuel or brake lines may not be properly secured, posing risks of brake failure or fire.
Altec is recalling 2021-2024 JEMS S and SE vehicles because A/C hoses may overheat near the exhaust manifold, increasing fire risk.
Altec is recalling 2023-2024 aerial devices and related truck-mounted equipment due to lighting wire harness overload that may prevent vehicle lights from illuminating, reducing visibility to other drivers and increasing the risk of crashes.
Altec is recalling certain 2020-2024 LR7 and LR8 aerial devices because a hydraulic cylinder feeder tube may become damaged and leak oil, which can result in uncontrolled boom movement.
Altec is recalling certain 2004-2023 AT Series aerial devices because cables in the engine compartment may contact the hood, damaging the cables and causing a short circuit that increases fire risk. Free repair available through Altec.
Altec is recalling certain 2021-2023 aerial devices with Bobcat welders that may be misaligned, allowing fasteners to loosen and the welder to detach, becoming a road hazard and increasing crash risk.
Altec is recalling 2023 Digger Derricks because a defective brake flange casing may cause the turntable rotation gearbox to fail at high loads, increasing the risk of injury.
Altec is recalling 2004-2023 Digger Derricks because an incorrect valve may cause the winch to lower uncontrollably, risking injury.
Altec is recalling certain 2022-2023 Digger Derricks and Aerial Devices due to missing circuit breakers on AC power inverters, which could cause electrical fires. Altec will install the circuit breaker free of charge.
Altec is recalling 2019-2022 AT335 aerial devices because an inverter-powered outlet may lack ground-fault protection, increasing the risk of injury or fire.
Altec is recalling 1999-2022 L and LR Series aerial devices because a hydraulic hose may fail, causing the platform or load to move unexpectedly.
Altec is recalling 2022-2023 TG-124S trailers because axle U-bolts may loosen and detach, increasing crash risk. Owners should contact Altec for a free inspection and tightening.
Altec is recalling 2020-2023 aerial device trucks due to collision mitigation system software that may not be calibrated correctly, preventing the active braking system from activating. This increases the risk of a crash.
Altec is recalling 2021-2023 aerial devices, digger derricks, and related equipment because water can leak into strobe lights, causing electrical short-circuits that increase fire risk. No injuries have been reported.
Community-sourced company facts from Wikidata, not from any recall agency. This is background on the corporate entity — it says nothing about the recall(s) listed on this page, which come from the agency source notice above.
ALTEC
company in the Czech Republic
Source: Wikidata (Q54941310), licensed CC0. Wikidata is community-edited and may not reflect the current corporate structure.