Manufacturer
207 recalls in our database name Altec Industries, Inc. as the manufacturing or recalling firm.
Of the 207 recalls from Altec Industries, Inc. we have scored against our rubric, 3 (1%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 110 (53%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Altec is recalling 2023-2024 Digger Derrick vehicles because incorrect front winch bumper bolts may cause the bumper to detach or fail during operation.
Altec is recalling 2026 Service Body, Aerial Device, Digger Derrick, and AC Series Crane vehicles that may lack rearview cameras, increasing crash risk.
Altec is recalling specific aerial devices and derrick vehicles because improperly welded platform access steps may separate, increasing the risk of falls or injuries.
Altec is recalling 2021-2026 Digger Derrick and 2023-2025 TA Series Aerial Devices because improper wiring may allow driving with the boom elevated, increasing crash risk.
Altec is recalling 2021-2023 Service Body vehicles because water leaks into strobe lights, causing electrical short-circuits that increase fire risk.
Altec is recalling specific aerial devices and digger derricks because the automatic braking system was not recalibrated after moving the front radar box, increasing crash risk.
Altec is recalling 2024-2026 AT Series vehicles because turntable rotation bearing fasteners may not have been heat treated properly, posing a risk of component separation and injury.
Altec is recalling 2013-2025 AP45A trucks because a damaged wire in the cargo area can overheat and ignite flammable material, increasing the risk of fire.
Altec is recalling 2022-2026 Service Body vehicles because inverter AC wiring may be damaged, creating a short circuit and fire risk.
Altec Industries is recalling 2023-2025 Digger Derrick vehicles because an incorrect pole rack capacity rating may lead to loss of vehicle control.
Altec is recalling 2014-2026 AT Series aerial vehicles because a missing transmission interlock may allow the aerial device to operate while the chassis is not in park.
Altec Industries is recalling 2024-2026 AC Series Cranes because missing welds on the 26-foot insulating personnel jib may cause the platform to fall, increasing injury risk.
Altec is recalling specific aerial device vehicles because the ground-level emergency stop may fail to halt hydraulic functions in ePTO mode, increasing injury risk.
Altec is recalling 2025-2026 Digger Derrick and Aerial Device vehicles because improperly installed front-end radar may cause unexpected brake activation, increasing crash risk.
Altec is recalling 2025-2026 AM Series Aerial Devices because the emergency stop switch may fail to cut power, increasing injury risk.
Altec is recalling 2025 AC Series Cranes and Digger Derricks because a missing harness may cause loss of body or trailer lights, increasing crash risk.
Altec is recalling certain 2023-2026 Service Body, Aerial Device, Pressure Digger, Spray Truck and Digger Derrick vehicles because the low tire pressure rating printed on the final stage certification label is incorrect.
Altec is recalling 2021-2025 Digger Derrick and AM Series Aerial Devices because a missing diode may cause the engine to start unintentionally, posing an injury risk.
Altec is recalling 2022-2023 AA55, AM55, AN46, and AN55 vehicles because a missing check valve may reduce boom insulation, increasing the risk of electric shock.
Altec is recalling certain 2023-2025 Aerial Device and Digger Derrick vehicles because the electronic taillight module harness may have inadequate circuit protection.
Altec is recalling 2025 LR8 Series vehicles because improperly formed lockbolts may fail, potentially causing the elevator sub-base to separate from the truck frame.
Altec is recalling 2019-2024 AT Series vehicles because the lower emergency stop may not function when the upper control is selected, increasing the risk of death or serious injury.
Altec is recalling 2022-2025 ST600 vehicles with auxiliary engines because overloaded electrical circuits may overheat and increase the risk of fire.
Altec is recalling 2024 FOSV-CA vehicles because an interconnect battery cable may overheat, increasing the risk of a fire.
Altec is recalling 2024-2025 A-Class vehicles because platform retaining plate bolts may not have been properly tightened, posing a risk of detachment and injury.
Community-sourced company facts from Wikidata, not from any recall agency. This is background on the corporate entity — it says nothing about the recall(s) listed on this page, which come from the agency source notice above.
ALTEC
company in the Czech Republic
Source: Wikidata (Q54941310), licensed CC0. Wikidata is community-edited and may not reflect the current corporate structure.