Manufacturer
203 recalls in our database name Altec Industries, Inc. as the manufacturing or recalling firm.
Of the 203 recalls from Altec Industries, Inc. we have scored against our rubric, 3 (1%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 108 (53%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Altec is recalling 2021-2023 Digger Derricks because a defective boom pressure limiter may allow lifting loads above rated capacity, increasing the risk of unit instability and injury.
Altec is recalling 2017-2022 Digger Derricks because missing hardware may allow the auger extension bar to detach, increasing injury risk.
Altec is recalling 2016-2022 digger derricks and aerial devices because a missing weld on the rear pole rack could cause the pole to drop, increasing injury risk.
Altec is recalling 2022 Digger Derrick vehicles because an incorrect bolt may have been used on the derrick rotation bearing, increasing the risk of injury.
Altec is recalling 2019-2022 AT41ME aerial devices because the material handling interlocking valve may lose power, allowing the jib winch to operate while outriggers are up, which increases the risk of the unit tipping.
Altec Industries is recalling 2015-2022 DT65 and DT85 Aerial Devices because a weld crack could cause the auger bracket to detach, increasing injury risk.
Altec is recalling 2017-2021 aerial devices because a wire may be damaged by a sharp edge, potentially causing an engine stall and increasing crash risk.
Altec Industries is recalling 2016-2022 AT200A and AT30-G vans because a faulty outlet may fail to protect against electrical overloads, increasing fire risk.
Altec Industries is recalling 2016-2022 Digger Derricks because relay connectors may be attached incorrectly, causing the hydraulic overload protection system to fail.
Altec is recalling 2017-2021 SK185-MP and SKC landscaping spray vans because they lack carbon monoxide detectors, increasing the risk of injury from undetected gas.
Altec is recalling 2016-2021 aerial devices because improperly secured fuel line clamps may cause leaks and increase fire risk.
Altec is recalling 2018-2021 Aerial Devices and Digger Derricks because cracks in the subbase bulkhead plate can cause shear plate failure, increasing the risk of injury.
Altec is recalling 2019-2021 ATTXX-M/P/S aerial devices because over-tightened bolts in the rotation bearing may break, risking separation of the pedestal and turntable.
Altec is recalling 2021 AH125 aerial devices because a defective component may cause the boom to move unexpectedly, increasing injury risk.
Altec is recalling 2017-2021 LS60 aerial devices because bearing bolt washers may interfere with welds, causing bolts to break and increasing injury risk.
Altec Industries is recalling 2017-2021 aerial devices because incorrect hydraulic plumbing could allow booms to overextend, increasing the risk of tipping and injury.
Altec is recalling 2012-2016 AT200A aerial devices because cracks in the mounting frame legs may cause the side plate to break, increasing injury risk.
Altec is recalling 2011-2016 AT200A aerial devices because cracks in the mounting frame legs may cause the side plate to break, increasing injury risk.
Altec is recalling 2016-2021 LS87 aerial devices because bearing bolt washers may interfere with welds, causing bolts to break and increasing injury risk.
Altec Industries is recalling 2021 AM50, 55, and 60E aerial devices because improperly machined cylinder rod threads may cause uncontrollable boom movement, increasing injury risk.
Altec is recalling 2016-2021 Digger Derricks because the pole guide joystick can be inadvertently moved by the operator's forearm, posing an injury risk.
Altec is recalling 2020 AA and AN class vehicles because a failed weld on the leveling sprocket may cause uncontrolled platform movement, increasing the risk of injury and death.
Altec is recalling 2020-2021 D2000, D3000, and D4000 Derrick diggers because an improperly seated retaining ring allows the boom to rotate unintentionally, increasing injury risk.
Altec is recalling 2020-2021 AT200A, AT235, and AT235P aerial devices because insufficient strength bolts may fail, causing the pedestal to separate and increasing the risk of injury or death.
Altec is recalling 2005-2021 aerial devices because boom spools can shift, increasing injury risk. Owners should contact Altec for free repairs.
Community-sourced company facts from Wikidata, not from any recall agency. This is background on the corporate entity — it says nothing about the recall(s) listed on this page, which come from the agency source notice above.
ALTEC
company in the Czech Republic
Source: Wikidata (Q54941310), licensed CC0. Wikidata is community-edited and may not reflect the current corporate structure.