The Recall Desk

State

Vermont product recalls

20,188 recalls have nationwide distribution and so reach Vermont. 0 additional recalls listed Vermont specifically in their distribution scope.

About recalls in Vermont

Most US product recalls have nationwide distribution — the manufacturer ships into every state and the recall sweeps the same way. We include those in this listing because they affect Vermont consumers even though the source notice doesn’t name the state. State-specific recalls are usually for products with regional distribution (a regional dairy, a local store brand) or where the agency was able to narrow the affected shipments to specific destinations.

If you’re checking whether a recall affects your purchase, the recall detail page lists the exact production lot codes, UPCs, and best-by dates. Match those against your package — distribution scope is a starting filter, not the final answer.

7626–7650 of 20188

  • HighFDA (Devices)·Z-3097-2024·2024-09-18

    Smith & Nephew Tendon Staples Recalled for Compromised Packaging Sterility

    Smith & Nephew is recalling 2,961 units of ROTATION MEDICAL TENDON STAPLES due to improper outer foil pouch sealing that may compromise product sterility. No injuries have been reported.

    Product
    ROTATION MEDICAL TENDON STAPLES (8) (narrow indication)-Intended for fixation of prosthetic material to soft tissues. Product Number: 72205201
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3119-2024·2024-09-18

    Medline Surgical Suction Kits Recalled for Potential Loss of Suction

    Medline Industries recalls specific lots of semi-rigid suction liners in C-section convenience kits due to reported adverse events. The liners may lose suction during intermittent use.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: MERCY TIFFIN C-SECTION, Pack Number DYNJ909732
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3117-2024·2024-09-18

    Medline Suction Liners Recalled Due to Potential Suction Loss

    Medline Industries is recalling 134 units of semi-rigid suction liners due to potential loss of suction during intermittent use. The affected kits were distributed worldwide including the US, Canada, and Panama.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: KIT NEURO SHUNT ST LOUIS CHILD, Pack Number DYNJ907829B
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3110-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled for Potential Loss of Suction

    Medline Industries is recalling specific convenience kits with semi-rigid suction liners due to reported adverse events and potential loss of suction during intermittent use. Affected: 358 units distributed in US, Canada, and Panama.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: a) MINOR PROCEDURE, Pack Number CDS981509C; b) GENERAL LAPAROSCOPY CDS, Pack Number CDS981512J; c) OR MAJOR CDS, Pack Number CDS981515D; d) MAJOR-LF, Pack Number DYNJ900709C; e) MAJOR-LF, P
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3114-2024·2024-09-18

    Medline semi-rigid suction liners recalled for potential suction loss

    Medline is recalling specific lots of semi-rigid suction liners from surgical convenience kits due to potential loss of suction during intermittent use. The recall affects approximately 3117 units distributed in the US, Canada, and Panama.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: a) ENDO KIT, Pack Number DYKE1092B; b) VIDEO BRONCHOSCOPY TRAY, Pack Number DYKE1666; c) SUCTION CANISTER KIT, Pack Number DYKM2196; d) SUCTION CANISTER KIT, Pack Number DYKM2196H; e) BRON
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3104-2024·2024-09-18

    ADVIA Centaur CA 19-9 test kit recalled for measurement bias in samples

    Siemens Healthcare is recalling ADVIA Centaur CA 19-9 diagnostic test kits due to positive measurement bias in some samples. The affected kits may report falsely elevated test results, particularly around the normal limit of 35 U/mL.

    Product
    ADVIA Centaur CA 19-9 (250 Test)-In vitro diagnostic use in the quantitative measurement of the CA 19-9 tumor-associated antigen in human serum using the Atellica CI and Atellica IM Analyzers SMN: 10491244
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3126-2024·2024-09-18

    Proton Beam Therapy System Displays Insufficient CBCT Images on Button Press

    Hitachi's PROBEAT-CR proton therapy system may display insufficient CBCT images during image positioning when the Float Image Selection button is pressed. This could affect treatment planning accuracy.

    Product
    Brand Name: PROBEAT Product Name: PROBEAT-CR Model/Catalog Number: N/A Software Version: N/A Product Description: The PROBEAT-CR is a proton beam irradiation system, which provides a therapeutic proton beam for clinical treatment. It is designed to deliver a proton beam wit
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3102-2024·2024-09-18

    Siemens Atellica IM CA 19-9 Test Kit Recall: Measurement Bias in Samples

    Siemens is recalling Atellica IM CA 19-9 test kits (Lot 56434535) due to positive bias in measurement of tumor marker levels in some samples, particularly from Asia Pacific regions.

    Product
    Atellica IM CA 19-9 (250 Test - REF)-In vitro diagnostic use in the quantitative measurement of the CA 19-9 tumor-associated antigen in human serum using the Atellica CI and Atellica IM Analyzers SMN: 11206239
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3115-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled Due to Loss of Suction

    Medline is recalling 444 NICU admit kits containing semi-rigid suction liners due to potential loss or low suction during intermittent use. Affected units were distributed in the US, Canada, and Panama.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: NICU ADMIT KIT, Pack Number DYKA1014G
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3078-2024·2024-09-18

    Multiple Syringe Models Recalled for Deviation from FDA Clearance Specifications

    Sol-Millennium Medical is recalling multiple syringe models because the distributed products are substantially different from FDA-cleared specifications, with major changes to the intended use.

    Product
    Syringes with Low Dead Space labeled as: a) SOL-M 1ml Slip Tip Syringe w/o needle (low dead space), Model No. 180011LDS, UPC 840368511899; b) SOL-M 1ml Slip Tip Syringe w/o needle (low dead space), Model No. P180011LDS, UPC 810018097554; c) SOL-M 1ml Luer Lock Syringe w/Ex
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Drugs)·D-0657-2024·2024-09-18

    Barrier Therapy Skin Protectant Cream recalled for microbial contamination

    Prequel Skin is recalling Barrier Therapy Skin Protectant Cream due to microbial contamination. The recall affects approximately 30,946 tubes distributed nationwide and online.

    Product
    BARRIER THERAPY SKIN PROTECTANT CREAM (1% colloidal oatmeal), 10 FL OZ/296 ML- tube, Distributed By: Prequel, LOS ANGELES, CA 90069. UPC 8 10129 11007 4
    Category
    Drug
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2975-2024·2024-09-18

    HeNe Laser System Allows Key Removal While Operating

    Pacific LaserTech's 25-LHP-828 HeNe laser systems allow the key to be removed while operating, violating federal safety requirements. Four units distributed nationwide lack proper controls to prevent unintended laser operation.

    Product
    25-LHP-828, HeNe Laser System, 35 mW
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3133-2024·2024-09-18

    Biolox Taper Sleeve Mislabeling: Wrong Component Size in Hip Replacement

    Zimmer GmbH is recalling Biolox Option Taper Sleeves due to mislabeling where packaging labels one neck size but contains the opposite size. These components are used in hip replacement surgery.

    Product
    Biolox Option Taper Sleeve, Type 1 Taper, -6mm Neck - Indicated for use in total hip replacement with cemented or non-cemented femoral and acetabular components. Item Number: 650-1064
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3106-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled for Potential Suction Loss

    Medline Industries is recalling anesthesia circuit kits due to reported adverse events indicating potential loss of suction during intermittent use. Approximately 29,585 units distributed in the US, Canada, and Panama are affected.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: a) ANESTHESIA CIRCUIT-LF, Pack Number DYNJAA0311C; b) ANESTHESIA CIRCUIT-LF, Pack Number DYNJAA0323C; c) ANESTHESIA CIRCUIT ADULT, Pack Number DYNJAA0378A; d) ADULT ANESTHESIA CIRC LAGUNA, Pa
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3116-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled for Potential Suction Loss

    Medline is recalling 1,800 units of semi-rigid suction liners used in anesthesia turnover kits due to reported adverse events related to potential loss of suction during intermittent use. Affected lots were manufactured between September and November 2023.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: ANES TURNOVER KIT-LF, Pack Number DYNJAA10338J
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2977-2024·2024-09-18

    HeNe laser system recalled for removable key safety control defect

    Pacific Lasertech is recalling the N-LHP-928 HeNe Laser System (35 mW) because the key-actuated safety control can be removed while the laser is operating, defeating the required master control mechanism.

    Product
    N-LHP-928, HeNe Laser System, 35 mW
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3128-2024·2024-09-18

    Medtronic Venous Cannulae: Wrong Product in Incorrect Packaging

    Medtronic Perfusion Systems is recalling 290 units of DLP Single Stage Venous Cannulae due to a manufacturing error where straight-tip cannulae were placed into packaging labeled for right-angle metal-tip cannulae.

    Product
    Medtronic DLP Single Stage Venous Cannulae with right angle metal tip, REF 67312
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3063-2024·2024-09-18

    Siemens Atellica CH diagnostic reagent batch may produce biased results

    A specific lot of Siemens Atellica CH urinary/cerebrospinal fluid protein reagent (lot 130414) may produce biased quality control results and inaccurate patient test outcomes. Approximately 229 units were distributed in the United States and 935 internationally.

    Product
    Atellica CH Urinary/Cerebrospinal Fluid Protein (UCFP); Siemens Material Number (SMN): 11097543
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3124-2024·2024-09-18

    Blood Pressure Module Fails to Record or Alarm in Hemodialysis Machines

    Fresenius hemodialysis machines with BPM3 blood pressure modules may fail to record measurements and will not alarm if cuff tubing is kinked. About 3,718 affected units in the US and Canada could result in undetected blood pressure changes during treatment.

    Product
    Blood Pressure Module BPM3 TM-2917B (Spare Part Numbers 191378 or 191389) with firmware version S005 installed in 2008 Series Hemodialysis Machines with Part Numbers 190573, 190713, 190766, 190858, 190895, 190908, 191124, 191126, 191128, and 191130
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3125-2024·2024-09-18

    Proton therapy system may display insufficient CBCT images during positioning

    Hitachi PROBEAT-FR proton therapy systems may display an insufficient number of CBCT images during 3D positioning when the Float Image Selection button is pressed, potentially affecting treatment planning accuracy.

    Product
    Brand Name: PROBEAT Product Name: PROBEAT-FR Model/Catalog Number: N/A Software Version: N/A Product Description: The PROBEAT-FR is a proton beam irradiation system, which provides a therapeutic proton beam for clinical treatment. It is designed to deliver a proton beam wit
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2976-2024·2024-09-18

    HeNe Laser System Key Control Can Be Removed While Operating

    PACIFIC LASERTECH's 25-LHP-928 HeNe laser systems have a safety defect: the key control can be removed while the laser is operating. The company is replacing affected units with corrected key switches.

    Product
    25-LHP-928, HeNe Laser System, 25 mW
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3122-2024·2024-09-18

    FilmArray 2.0 Diagnostic Instruments Recalled for Calibration Error Affecting Test Results

    BioFire Diagnostics is recalling FilmArray 2.0 diagnostic instruments that may have been incorrectly calibrated, leading to false positive and false negative results for infectious disease tests including Salmonella, Giardia, Norovirus, and MRSA.

    Product
    FILMARRAY 2.0 INSTRUMENT, REF: FLM2-ASY-0001, FLM2-ASY-0001-W
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3092-2024·2024-09-18

    Medline ReNewal Reprocessed LigaSure Blunt Tip Recalled for Packaging Seal Defect

    Medline Industries is recalling 3,618 units of ReNewal Reprocessed Covidien LigaSure Blunt Tip surgical devices due to potential incomplete seals on packaging trays. The seal defect could compromise product sterility.

    Product
    Medline ReNewal Reprocessed Covidien LigaSure Blunt Tip, Sealer/Divider, Nano-Coated, Compatible w/ FT10 37cm FT10 SW Version 4.0.1.15 or lower. Item Number: LF1837CR.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3109-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled for Potential Loss of Suction

    Medline Industries is recalling 407 units of semi-rigid suction liners manufactured between September and November 2023 due to potential loss of suction during intermittent use.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: a) BAPTIST FLOYD BRONCHOSCOPY, Pack Number DYKE1456D; b) ENT MINOR, Pack Number DYNJ908099B; c) HEAD & NECK, Pack Number DYNJ908101B; d) NASAL FESS, Pack Number DYNJ908105B; e) NASAL-LF, Pa
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3105-2024·2024-09-18

    Medline semi-rigid suction liners recalled due to potential suction loss

    Medline Industries is recalling specific lots of semi-rigid suction liners due to potential loss of suction or low suction during use. About 1.25 million units distributed in the US, Canada, and Panama are affected.

    Product
    Medline Semi-rigid suction liners labeled as follows: a) SEMI RIGID SUCTION LINER, REF OR515; b) SEMI RIGID SUCTION LINER WITH TUBING, REF OR526K; c) SEMI RIGID SUCTION LINER WITH TUBING, REF OR527K; d) SEMI RIGID SUCTION LINER WITH TUBING, REF OR529K
    Category
    Medical Device
    Distribution
    Distributed nationwide