Barco Front Cover Attachment Kit Recalled for Potential Falling Hazard
Barco N.V. is recalling 2,087 MDRC-1119 Front Cover Attachment Kits because metal strips may deform, causing the protective cover to fall.
The agency’s classification
FDA (Devices): Class II
Class II is a situation in which use of or exposure to a violative product may cause temporary or medically reversible adverse health consequences, or where the probability of serious adverse health consequences is remote.
This is the agency’s own classification, taken from its notice. The severity score below is our assessment, not the agency’s. How recall classes work
What this means for you
Our assessment, not the agency’s: severity 3/5 (High).
Real risk of harm even if no illness or injury has been reported yet. Stop using the product and follow the agency's guidance.
Our severity reasoning: The recall involves a risk-of-harm product (falling cover) where injury has not yet been reported, fitting the High severity criteria.
Plain-English summary
Barco N.V. is recalling 2,087 units of the Optional MDRC-1119 Front Cover Attachment Kit. This product is an optional kit intended to be attached in front of the LCD panel of a review display (MDRC-1119). The affected part numbers are C9826108, C9826109, C9826096, and C9826097.
The recall is due to a risk that the protective front cover could come loose and fall. If the metal strips are removed and re-applied to another display, they may become deformed. This deformation results in a smaller contact surface with the front cover magnet strips, increasing the likelihood of the cover detaching.
The products were distributed worldwide, including in the United States (California, Illinois, Georgia, Texas, and Wisconsin) and in Belgium, Brazil, Canada, Czech Republic, Denmark, Finland, France, Germany, Italy, Japan, Poland, Saudi Arabia, South Africa, South Korea, Spain, Sweden, Taiwan, and Turkey. Users should contact Barco N.V. for instructions on how to address the issue.
The recalled product
- Product
- Optional MDRC-1119 Front Cover Attachment Kit for review display monitors. Product Usage: The product is an optional kit, intended to be attached in front of the LCD panel of a review display (MDRC-1119).
- Manufacturer
- Barco N.V.
- Hazard
- Affected units
- 2,087
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (4)
- Part Numbers C9826108
- C9826109
- C9826096
- C9826097
Distribution
Related recalls
Same manufacturer · Barco N.V.
See all →- HighBarco NexxisOR System Display Encoders and Decoders Recalled
FDA (Devices) · 2025-07-02
- ModerateBarco cathode ray tube display may lose connectivity with Molex module installed
FDA (Devices) · 2024-07-17
- HighBarco MDSC-8527 NXF Medical Display decoder functionality blocked
FDA (Devices) · 2024-02-14
- ModerateBarco Diagnostic Radiology Display Recalled for Lack of DICOM Compliance
FDA (Devices) · 2021-03-10
Same hazard · falling object
See all →- SevereLithonia Lighting Recalls RSX Luminaires with Adjustable Tilt Arms
CPSC · 2026-10-22
- HighMaquet PowerLED 300 Concealed Lighting System Recalled for Detachment Risk
FDA (Devices) · 2026-09-30
- HighMirion Captus 4000e Thyroid Uptake System Recalled for Spring Arm Failure
FDA (Devices) · 2026-09-23
- HighFord F-650 SD Recall: Liftgate Platform Deck Pins May Break
NHTSA · 2026-08-20
- SevereTerex Digger Derrick Trucks Recalled for Weld Defect
NHTSA · 2026-08-17
Similar recalls
- High
- HighPhilips Continuous CT Fluoroscopy Monitor Bracket Assembly Fall Risk
FDA (Devices) · 2021-07-07
- HighStryker Vision Mounting Arm Recalled Due to Display Detachment Risk
FDA (Devices) · 2013-10-02
- ModerateBarco Diagnostic Radiology Display Recalled for Lack of DICOM Compliance
FDA (Devices) · 2021-03-10
- HighStryker Connected OR Cart Recalled Due to Monitor Attachment Defect
FDA (Devices) · 2020-03-11
- HighMonitor Bracket Assembly Fall Hazard Recall Affects Multiple CT Systems
FDA (Devices) · 2021-07-07