Barco cathode ray tube display may lose connectivity with Molex module installed
Barco display units may lose HDMI connectivity and become unusable when a specific Molex network module is installed in the ETH0 slot of affected models.
The agency’s classification
FDA (Devices): Class II
Class II is a situation in which use of or exposure to a violative product may cause temporary or medically reversible adverse health consequences, or where the probability of serious adverse health consequences is remote.
This is the agency’s own classification, taken from its notice. The severity score below is our assessment, not the agency’s. How recall classes work
What this means for you
Our assessment, not the agency’s: severity 2/5 (Moderate).
Minor labeling or packaging issue, or a voluntary precautionary recall. Risk of harm is low but real — follow the manufacturer's instructions.
Our severity reasoning: FDA Class II medical device with a connectivity defect causing device non-functionality. No injuries, illnesses, or reported incidents documented in the source. The hazard is operational loss rather than direct patient safety risk.
Plain-English summary
Barco N.V. is recalling 88 MNA-420 ENC HDMI cathode ray tube display units due to a connectivity issue involving an SFP+ module supplied by Molex.
When the Molex module (Part Number B620050) is connected to the ETH0 slot of the affected display units, the connection may render the first HDMI channel inaccessible. This defect makes both the channel and the display unit unusable, and readings from the module become unavailable.
The affected units are identified by specific serial numbers and were distributed in Florida.
Customers who own affected units should verify their serial numbers against the provided recall list. If your unit is affected, discontinue use of the Molex module in the ETH0 slot or contact Barco N.V. for instructions on replacement or repair options.
The recalled product
- Product
- MNA-420 ENC HDMI, Material Number K9303311; cathode ray tube display
- Manufacturer
- Barco N.V.
- Affected units
- 88
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (20)
- serial numbers: 2530986299
- 2530986300
- 2530986301
- 2530986302
- 2530986303
- 2530986304
- 2530986305
- 2530986306
- 2530986307
- 2530986308
- 2530986309
- 2530986310
- 2530986311
- 2530986312
- 2530986313
- 2530986314
- 2530986315
- 2530986316
- 2530986317
- 2530986318
Distribution
Distributed in 1 state:
Related recalls
Same manufacturer · Barco N.V.
See all →- HighBarco NexxisOR System Display Encoders and Decoders Recalled
FDA (Devices) · 2025-07-02
- HighBarco MDSC-8527 NXF Medical Display decoder functionality blocked
FDA (Devices) · 2024-02-14
- ModerateBarco Diagnostic Radiology Display Recalled for Lack of DICOM Compliance
FDA (Devices) · 2021-03-10
- HighBarco Front Cover Attachment Kit Recalled for Potential Falling Hazard
FDA (Devices) · 2018-12-12
Similar recalls
- HighBarco MDSC-8527 NXF Medical Display decoder functionality blocked
FDA (Devices) · 2024-02-14
- HighBarco Medical Network Adapter Recalled for Installation Issues
FDA (Devices) · 2022-10-05
- ModerateBard Access Systems Recalls MRI Low Profile Ports with Undersized Catheters
FDA (Devices) · 2014-01-29
- ModerateBard Access Systems Recalls Low Profile Ports with Undersized Catheters
FDA (Devices) · 2014-01-29
- ModerateDisplay adapters recalled after the wrong configuration file was used
FDA (Devices) · 2026-02-18
- SevereEndotracheal Tubes Recalled Due to Connector Disconnection Risk
FDA (Devices) · 2023-07-05