Vehicle
20 recalls affect this vehicle. Sorted by severity, then date.
Oshkosh is recalling 2024-2025 S-Series vehicles because the front axle housing may be too thin, risking axle failure and loss of control.
Oshkosh is recalling 2022-2024 S-Series vehicles because the throttle pedal may stick or respond slowly, increasing crash risk.
Oshkosh is recalling 2019-2022 S-Series vehicles because front axle u-bolts may fail, potentially allowing the axle to shift or detach and increasing crash risk.
Oshkosh is recalling 2021 S-Series vehicles because auxiliary axles may not be properly secured and could detach, increasing the risk of a crash.
Oshkosh is recalling 2020-2021 S-Series vehicles because the rear axle output shaft may fracture, increasing the risk of a crash or injury.
Oshkosh is recalling 172 2020 S-Series vehicles because a pressure switch defect may cause air leaks, increased braking distance, or brake light failure.
Oshkosh is recalling 2018-2019 S-Series Mixer vehicles because hydraulic hoses may be installed incorrectly, causing loss of steering assist and increasing crash risk.
McNeilus is recalling 2016-2018 trucks and Oshkosh S-Series vehicles because a CNG fuel tank valve stem may eject, posing injury and fire risks.
Oshkosh is recalling 2014-2015 S-Series concrete mixers powered by compressed natural gas because pressure relief devices may fail to vent pressure, posing a risk of tank explosion, fire, and injury.
Oshkosh is recalling 24 model year 2015 S-Series concrete mixer glider trucks because paint on the torque converter may soften, causing bolts to loosen and potentially leading to a loss of drive power.
Oshkosh is recalling 2012-2014 S-Series Front Discharge Concrete Mixers because excessive engine pressure may cause oil to leak onto hot surfaces, increasing fire risk.
Oshkosh is recalling 2014-2015 S-Series Front Discharge Concrete Mixers because air tanks may hold insufficient volume, increasing crash risk.
Oshkosh is recalling 2012-2014 S-Series Ready Mixed Concrete trucks because condensation in the intake manifold may freeze, causing elevated exhaust temperatures or flames that increase the risk of fire or burn injury.
Oshkosh is recalling 2013 S-Series ready mixed concrete trucks because missing lock washers may allow the brake pedal bracket to loosen, reducing braking capability.
Oshkosh is recalling 2019-2022 S-Series 2.0 Concrete Mixers because incorrectly installed alternator cable clamps may damage cables, increasing the risk of a fire.
Oshkosh is recalling 2019-2022 S-Series vehicles because fuel tubes may crack, causing high-pressure leaks that increase fire risk.
Oshkosh is recalling 2020-2021 S-Series vehicles because a machining defect may cause the power steering pump shaft seal to break, resulting in a loss of steering assist.
Oshkosh is recalling 2019-2022 S-Series vehicles because they have 10-amp ABS fuses instead of the required 15-amp fuses, which may blow during braking and increase crash risk.
Oshkosh is recalling 2014-2019 S-Series Glider vehicles because incorrectly placed strobe lights may confuse other drivers and increase crash risk.
Oshkosh is recalling 2016 S-Series Front Discharge Concrete Mixers because a faulty engine control module may cause an unexpected engine stall, increasing crash risk.