Manufacturer
47 recalls in our database name Terex South Dakota, Inc. as the manufacturing or recalling firm.
Of the 47 recalls from Terex South Dakota, Inc. we have scored against our rubric, 0 (0%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 23 (49%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Terex is recalling 2009-2014 TC and TCX hybrid electric trucks because improper wiring may cause the aerial boom to move unintentionally, increasing the risk of injury.
Terex is recalling 2015-2016 HR, HRX, TC, and TCX aerial devices because poor welds on the platform leveling cylinder may cause the platform to tilt, risking occupant falls.
Terex is recalling 2016 HR, HRX, LT, LTM, TL, TC, and TCX aerial devices because a hydraulic motor shaft may fail, causing unexpected boom rotation or winch movement.
Terex is recalling 2001-2003 XT52, XT55, and XT60 aerial devices because lower booms may be made of insufficiently strong material, posing a risk of cracking and injury.
Terex is recalling 2011-2016 aerial devices because inadequate welds at the boom tip may cause the platform to tilt unexpectedly, increasing the risk of user injury.
Terex is recalling 2007-2013 aerial devices because missing reinforcements may cause the pedestal to crack, increasing injury risk.
Terex is recalling 2015-2016 aerial devices and digger derrick lifts because the suspension circuit can inflate air bags, lifting outriggers and increasing injury risk.
Terex is recalling 2008-2015 aerial devices because cylinder components may contact structural parts, potentially causing platform tilting and occupant falls.
Terex is recalling 2011-2015 SCM48, SCM50, and SCM55 aerial devices because a defective leveling cylinder linkage can cause the platform to tilt, posing an injury risk.
Terex is recalling 386 model year 2013-2015 Digger Derrick and Aerial Devices trucks because vertical cylinders may drift when loaded, risking platform falls.
Terex is recalling 2014-2015 Digger Derricks and Aerial Devices because fasteners may fail, causing the boom to fall and risking injury.
Terex is recalling 2013 Hi-Ranger trucks because a bearing installation issue may allow the platform to rotate without operator control, increasing injury risk.
Terex is recalling 2009-2013 aerial devices mounted on Ford Super Duty chassis because oil may leak onto the exhaust, increasing fire risk.
Terex is recalling 2006-2014 TLM series aerial devices installed on Ford F550 vehicles due to a potential frame crack that could cause loss of control.
Terex is recalling 1997-2013 XT55 and XT60 aerial devices because cracks in the boom hinge may cause the platform to fall, risking injury.
Terex is recalling 2012-2013 Digger Derricks and Aerial Devices because damaged outrigger seals may cause the unit to overturn, increasing injury risk.
Terex is recalling 1998-2005 OM Aerial Devices because fatigue cracks in the leveling arm may cause failure, risking injury to operators.
Terex is recalling 240 model year 2000-2009 aerial device utility trucks because a hydraulic seal failure may cause the boom to move unexpectedly.
Terex is recalling 2012 T292, TL, and NT Aerial Devices because a faulty inverter may fail to provide ground fault protection, posing an electrocution risk.
Terex is recalling 1999-2012 Digger Derrick utility trucks because hydraulic cylinder shims may fail, causing the arm to collapse and injure operators.
Terex is recalling 2012 utility trucks with SCM Aerial Devices because the leveling arm may break, potentially causing occupants to fall.
Terex is recalling certain XT55 aerial devices because cracks in the boom hinge can cause the platform to fall, risking serious injury or death.