Manufacturer
47 recalls in our database name Terex South Dakota, Inc. as the manufacturing or recalling firm.
Of the 47 recalls from Terex South Dakota, Inc. we have scored against our rubric, 0 (0%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 23 (49%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Terex is recalling pole position guide arm assembly pins because an insufficient weld may crack, causing the pin to separate and the arm to fall.
Terex is recalling 2019-2026 digger utility trucks because a weld defect may cause the pole guide arm to fall, posing an injury risk.
Terex is recalling 2025 TL, LT, LTM40, HR40, HR46, and SCM55 aerial devices because a control valve defect may cause hydraulic equipment to overheat, posing a burn risk.
Terex is recalling 2023-2024 TL and TM series vehicles because a weak weld on the jib extension hydraulic cylinder rod may fail, increasing injury risk.
Terex is recalling 2020-2024 XT Pro vehicles because replacement basket brackets may cause the basket to tilt, risking occupant falls.
Terex is recalling 2022-2023 TM-Series vehicles because the master leveling controller may lose the ability to level the platform if power is lost while squeezing the enable trigger.
Terex is recalling 2023 Optima and XT Pro vehicles because improperly tightened boom rotation bearing bolts may fail, causing the boom to fall and increasing injury risk.
Terex is recalling 2021-2023 TL48 trucks because improperly tightened bolts may allow the aerial device to fall, increasing injury risk.
Terex is recalling 2021 TL48 trucks because a subframe weld defect could cause the aerial device to fall, increasing injury risk.
Terex is recalling 431 units of 2022 C4000, C5000, C6000, C7000, General, and TL vehicles because a seam in the boom structure may have been improperly welded.
Terex is recalling 2022 Optima TC, XT Pro, and C4000 vehicles because incorrect machining may cause outrigger cylinders to drift, increasing the risk of the machine tipping.
Terex is recalling 2019-2022 TL80, TL80/112, and TL100 aerial devices because weld cracks may cause the platform to tip, increasing injury risk.
Terex is recalling 2020-2022 XT Pro aerial devices because un lubricated pivot points may cause pins to seize and break retainers, risking boom failure.
Terex is recalling 2016-2021 OM, Optima-HRX, and TCX aerial devices because emergency stop controls may fail to stop all boom functions, increasing injury risk.
Terex is recalling 2019-2020 TL80 and TL100 aerial devices because rotation bearing bolts may loosen and fail, potentially causing the boom to fall.
Terex is recalling 2019-2020 TL80 and TL80/112 aerial devices because incorrect slope indicators may allow unsafe operation, risking tip-overs.
Terex is recalling 2018-2019 Digger Derrick vehicles because an engine computer error can disable remote engine stop functions, increasing injury risk during hydraulic issues.
Terex is recalling 2009-2016 TCX and SML aerial devices because lift cylinder rod eyes may fail, causing the boom to drift down and increasing injury risk.
Terex is recalling 2014-2019 TM bucket/boom trucks because an upside-down limit switch may fail to stop platform tilting, increasing injury risk.
Terex is recalling 2016-2017 TLM aerial devices because an incorrect holding valve may cause the boom to drift down if a hose bursts.
Terex is recalling 2017-2018 Digger Derrick vehicles because insufficient welds on the guide bar may cause the guide arm to fall, posing an injury risk to nearby personnel.
Terex is recalling 2015-2018 C4000, C5000, C6000, and General 80 digger derricks because undersized welds may cause the auger to fall unexpectedly, posing an injury risk.
Terex is recalling 2015-2017 XT Pro 56 and 60 aerial devices because the platform control enable system may be adjusted incorrectly, increasing injury risk.
Terex is recalling 2007-2016 aerial devices and digger derricks because the onboard electrical breaker may fail to trip during a short circuit, increasing the risk of user injury.
Terex is recalling 444 Digger Derricks and Aerial Devices from 2012-2017 because a hood switch may prevent remote engine shutdown, increasing injury risk.