Manufacturer
36 recalls in our database name Meritor, Inc. as the manufacturing or recalling firm.
Of the 36 recalls from Meritor, Inc. we have scored against our rubric, 0 (0%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 33 (92%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Meritor is recalling specific front steer drive axles because insufficient lubricant may damage wheel bearings, potentially causing the wheel to separate and increasing crash risk.
Meritor is recalling replacement tie rods with specific USK ball studs that may break due to incorrect heat treatment, risking loss of steering control.
Meritor is recalling specific front drive steer axles because fasteners may loosen, potentially causing axle separation and loss of vehicle control.
Meritor is recalling specific front drive steer axles because fasteners may not be tightened sufficiently. This defect could cause axle separation and loss of vehicle control.
Meritor is recalling certain Front Non-Drive Steer Axles because improperly heat-treated tie rod clamps may crack and separate, potentially causing a sudden loss of steering.
Meritor is recalling 180 Series Drive Pinions because they may fracture. A fractured pinion could engage the parking brake without warning, increasing crash risk.
Meritor is recalling 180 Series Drive Pinions because they may fracture and engage the parking brake without warning, increasing crash risk.
Meritor is recalling specific 14Xe ePowertrains because insufficiently crimped stator wires may cause overheating and loss of motive power, increasing crash risk.
Meritor is recalling specific TSE T2024 Air Brake Chambers because incorrect springs may cause the pressure plate to shift, potentially leading to a loss of air pressure and increased crash risk.
Meritor is recalling specific pressure assemblies where an incorrect fitting may cause the power steering hydraulic hose to fail, resulting in a loss of steering assist.
Meritor is recalling specific steer axles due to insufficient lubrication that may damage wheel end bearings. This defect could cause the wheel to separate, leading to a loss of vehicle control.
Meritor is recalling specific front steer axles that missed a heat treat step, potentially causing fractures and loss of vehicle control.
Meritor is recalling specific steer axles because insufficient lubrication may damage wheel end bearings, potentially causing wheel separation and loss of vehicle control.
Meritor is recalling specific EX225 disc brake calipers because cracked drive pins may fracture, causing the vehicle to pull to one side while braking and increasing crash risk.
Meritor is recalling specific wheel studs installed in steer axle hubs because improper heat treatment may cause them to fail, potentially leading to wheel detachment.
Meritor is recalling trailer axles and suspensions with EX225 brakes because improperly torqued caliper bolts may allow the caliper to detach, causing a loss of braking ability.
Meritor is recalling specific MX810 Series front drive steer axles because lower king-pins may fracture, potentially causing wheel end separation and loss of vehicle control.
Meritor is recalling specific 71000 and 79000 Series axles manufactured in 2016 due to insufficient grease, which may cause bearing failure and increase crash risk.
Meritor is recalling specific FF967 Non-Drive Front Steer axles manufactured in 2012 because they may have been incorrectly heat treated, posing a risk of fracture and loss of vehicle control.
Meritor is recalling certain trailer axle assemblies equipped with specific air brake actuators that may experience brake drag, posing a risk of wheel end fire.
Meritor is recalling specific axle assemblies because caliper bolts may not be properly tightened. This defect could cause the caliper to detach, reducing braking performance and increasing crash risk.
Meritor is recalling specific MT-40-14X rear drive train axles because low lubricant levels may cause bearing failure and increase crash risk.
Meritor is recalling specific front non-drive axles because tie rod nuts may not be properly torqued, which could lead to a loss of vehicle control.
Meritor is recalling specific MFS12143ANN non-drive steer axles because manufacturing errors may have created weak spots in the beam, increasing the risk of sudden axle failure and a crash.
Meritor is recalling specific drive axle wheel ends manufactured between August and December 2012 because a missing locking snap ring could cause rear wheels to separate from the vehicle.
Community-sourced company facts from Wikidata, not from any recall agency. This is background on the corporate entity — it says nothing about the recall(s) listed on this page, which come from the agency source notice above.
Meritor
public company
Source: Wikidata (Q322153), licensed CC0. Wikidata is community-edited and may not reflect the current corporate structure.