Manufacturer
39 recalls in our database name Vermeer Manufacturing Company as the manufacturing or recalling firm.
Of the 39 recalls from Vermeer Manufacturing Company we have scored against our rubric, 0 (0%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 30 (77%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Vermeer is recalling 2002-2026 BC1800XL brush chipper trailers because the hydraulic jack may extend unexpectedly, increasing the risk of loss of vehicle control and injury.
Vermeer is recalling 2025 R600T trailers because the rear impact guards may have inadequate strength, increasing injury risk in crashes.
Vermeer is recalling 2020-2025 LPSDT, LPSGT, and LPXDT vacuum excavator trailers because the frame may crack or break, reducing stability while being towed.
Vermeer is recalling 2024-2025 VXT600 G2 vacuum vehicles because undersized welds on lift supports may fail, allowing the tank door to open and creating a road hazard.
Vermeer is recalling 84 units of the 2024 BC1200XL brush chipper because axle mounting bolts may not be properly tightened, posing a crash risk.
Vermeer is recalling 2023 LPSDT vacuum excavator trailers because the frame may bend or distort, potentially causing loss of stability and control while towing.
Vermeer is recalling 2015-2022 BC900XL brush chipper trailers because the service manuals list incorrect lug nut torque values, which could lead to wheel detachment.
Vermeer is recalling 2016-2024 BC1800XL brush chipper trailers because the tongue weldment may crack and separate from the tow hitch, increasing crash risk.
Vermeer is recalling 2021-2023 BC700XL brush chipper trailers because an incorrect retention bolt in the safety chain assembly may allow the chain to detach, increasing crash risk.
Vermeer is recalling specific Vac-Tron vacuum excavator trailers because the frame may bend or distort, potentially causing loss of stability and control while towing.
Vermeer is recalling 2022 BC1800XL trailers because improper hitch bolts may fail, causing the trailer to separate and increasing crash risk.
Vermeer is recalling 2018-2022 vacuum excavators because operator manuals list incorrect lug nut tightness values, which could lead to wheel detachment.
Vermeer is recalling 2005-2021 McLaughlin and 2021 Vermeer vacuum excavators because rear clearance lamps and reflectors are insufficient, increasing crash risk.
Vermeer is recalling 2021 BC900XL, BC1000XL, and BC1200XL brush chippers because the discharge chute may separate and fall off the trailer, creating a road hazard.
Vermeer is recalling 2015-2021 AX19 brush chipper trailers because a crack in the undercarriage frame may cause it to bend, increasing the risk of a crash.
Vermeer is recalling 2021 BC900XL brush chipper trailers because axle mounting bolts may not be tightened properly, increasing crash risk.
Vermeer is recalling 2020 BC1200XL and BC1500 wood chippers because wheel lug nuts may loosen, allowing the wheel to detach and increasing crash risk.
Vermeer is recalling certain 2016-2020 brush chipper trailers because incorrect lug nuts may loosen, potentially causing the wheel to detach or loss of control.
Vermeer is recalling 2015-2016 TR620 and TR626 trailers because improperly machined spring brake valves may delay braking, increasing the risk of the trailer rolling away.
Vermeer is recalling specific 2014-2016 trailers because improperly machined spring brake valves may delay braking, increasing the risk of the trailer rolling away.
Vermeer is recalling 2014-2016 TG5000 trailers because incorrect pushrod lengths may cause parking brakes to engage unintentionally, increasing crash risk.
Vermeer is recalling 2014-2016 TG5000 Tub Grinder trailers because incorrectly installed spherical washers may cause the kingpin to detach, increasing crash risk.
Vermeer is recalling 2012-2016 BC900XL wood chippers because improper chassis welds could cause the unit to separate from the tow vehicle, increasing crash risk.
Vermeer is recalling 2015-2016 TLR33 trailers because undersized tires may rub against fenders, increasing the risk of sudden tire failure and a crash.
Vermeer is recalling specific brush chippers and stump cutters because their LED side marker lights lack required reflectors, reducing vehicle visibility.