Manufacturer
203 recalls in our database name Altec Industries, Inc. as the manufacturing or recalling firm.
Of the 203 recalls from Altec Industries, Inc. we have scored against our rubric, 3 (1%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 108 (53%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Altec is recalling 2007-2012 Digger Derrick utility trucks because the winch drum could deform or fracture, posing a personal injury risk.
Altec is recalling 2010-2012 AC18, AC23, and AC38 cranes because front bumper outrigger brackets may be inadequate, potentially reducing stability and causing injury or death.
Altec is recalling 2011-2012 CFD 1217 wood chippers because blades may not meet hardness specifications, posing a risk of injury if they fail.
Altec Industries is recalling 2011-2012 Freightliner chassis vehicles because a kinked air supply line could cause loss of front brake control.
Altec is recalling 2002-2009 aerial vehicles because improperly torqued outrigger cylinders could loosen, posing a risk of injury or property damage.
Altec Industries is recalling 2011-2012 Digger Derrick vehicles with PENGO extensions because a weld defect may cause the shaft to separate, risking injury or property damage.
Altec Industries is recalling 2008-2009 AH100 and AH85 aerial devices because improper welding of boom pivot pins could cause the boom to separate from the turntable.
Altec is recalling 2012 aerial device vehicles because a torsion bar issue may cause steering deviation over bumps, increasing crash risk.
Altec Environmental Products is recalling specific wood chippers because cracks in the frame could lead to personal injury or property damage.
Altec is recalling 1993-2004 AA755 and AA755L vehicles because boom overloading could cause cracks and structural failure, posing injury risks.
Altec is recalling certain 2008-2011 utility vehicles because an incorrectly installed tree guard switch bracket could fall, posing an injury risk to people or property below.
Altec is recalling 2008-2011 Digger Derrick utility vehicles because the battery separator can overheat, causing smoke or fire.
Altec Industries is recalling 2010 AH75, AH85, and AH100 aerial devices because a platform leveling system failure could cause unintended movement, increasing the risk of death or serious injury.
Altec Industries is recalling 35 model year 2011 Digger Derrick vehicles because a mechanical interlock may fail, allowing accidental movement that could cause serious injury or death.
Altec Industries is recalling 2009-2011 Service Body vehicles because the compartment latch may fail in the secondary safety position, allowing the door to open during transit.
Altec is recalling certain 2009-2011 wood chippers because axle spindles may fail, causing wheels to separate and potentially resulting in a crash.
Altec Industries is recalling 1997-2009 aerial devices equipped with a BCM 44B electrical leakage monitoring system. The meter may be incorrectly installed, risking electrical shock or electrocution.
Altec Industries is recalling 2010-2011 Aerial Devices because an incorrectly installed battery fuse block may leave the battery cable unprotected, increasing the risk of a fire.
Altec is recalling certain 2009-2010 aerial devices and digger derricks because fasteners may fail, causing the boom to fall and potentially injure people.
Altec is recalling 2008-2009 DM45, DM47, and DM50 utility vehicles because cracks in the boom lift cylinder rod eye casting could cause the boom to fall, resulting in death or serious injury.
Altec Industries is recalling AT40M/P aerial devices manufactured between June 2007 and October 2009 because fiberglass arm links may lose electrical insulation, posing a shock hazard.
Altec is recalling certain aerial devices because a welded steel counterweight may fall out while traveling, posing a crash risk.
Altec Industries is recalling certain 1994-1997 service vehicles equipped with specific aerial devices because the hydraulic lift cylinder could fail under frequent use, posing a risk of death or serious injury.
Altec is recalling 1998-2008 AT37-G and AT35-G aerial devices because the insulating arm link may fail, posing a risk of death or serious injury.
Altec Industries is recalling 578 model year 2008-2009 Digger Derrick utility vehicles because improperly heat-treated pins can crack, allowing the auger to swing freely and strike bystanders.
Community-sourced company facts from Wikidata, not from any recall agency. This is background on the corporate entity — it says nothing about the recall(s) listed on this page, which come from the agency source notice above.
ALTEC
company in the Czech Republic
Source: Wikidata (Q54941310), licensed CC0. Wikidata is community-edited and may not reflect the current corporate structure.