Manufacturer
203 recalls in our database name Altec Industries, Inc. as the manufacturing or recalling firm.
Of the 203 recalls from Altec Industries, Inc. we have scored against our rubric, 3 (1%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 108 (53%) are Severe.
The manufacturer string comes from the agency’s own source notice — for FDA recalls, the “recalling firm” field; for NHTSA recalls, the vehicle manufacturer; for CPSC recalls, the firm-of-record on the joint press release. A single corporate family can appear under multiple manufacturer strings as agency notices aren’t standardized on a canonical name. If you don’t see recalls you expect, try a parent-company search or a broader full-text search.
Severity scores below are computed from the agency’s classification and the recall text, never from manufacturer behaviour or history. Many manufacturers issue routine corrective actions (software updates, labelling corrections) that are correctly scored low — having recalls on this list isn’t inherently a quality signal.
Altec is recalling 2016-2017 Aerial Devices and Digger Derricks because improperly sized cable connection receptacles may cause the high voltage grounding system to fail, increasing the risk of injury.
Altec is recalling 2012-2018 aerial devices missing a placard stating maximum towing limits, which could lead to an overloaded receiver tube and increased crash risk.
Altec is recalling 2016-2017 Digger Derrick vehicles because an improperly secured starter cable may chafe, causing an electrical short and increasing fire risk.
Altec is recalling 2017 TA48S aerial devices because the travel height may exceed the decal indication, increasing crash risk.
Altec Industries is recalling 2014-2017 Flatbed Bodies with stake rails because the rails may become dislodged, increasing the risk of injury or a crash.
Altec is recalling 2017-2018 EC175, EC225, and EC655 Boom-Mounted Saw vehicles because a valve may allow tree trunks to slip or fall, increasing injury risk.
Altec Industries is recalling 1992-2006 Digger Derrick trucks because a specific boom pivot pin may fail, causing unexpected boom movement that increases the risk of injury or death.
Altec Industries is recalling 2004-2005 aerial devices and elevator vehicles because the fiberglass upper boom may degrade and fail, increasing the risk of injury or death.
Altec Industries is recalling 1997-2017 aerial devices because a platform leveling yoke may fail, potentially causing occupants to fall.
Altec is recalling 2014-2017 AC40-152S cranes because the electronic Load Moment and Area Protection system may display incorrect load chart values.
Altec is recalling 2017 AT Aerial Devices on Ford F-550 chassis because a circuit breaker may contact the hood, potentially causing an electrical short and fire.
Altec Industries is recalling 2010-2011 Effer 440 and 470 Knuckle Boom Cranes because rotation bearing fasteners may fail, causing the pedestal to crack and increasing injury risk.
Altec Industries is recalling 1992-2000 Aerial Cable Placer AP45 vehicles because boom tips may crack and fail, increasing injury risk.
Altec is recalling 2011-2017 LS63 Aerial Devices because the jib mast may bend under load, increasing the risk of injury to nearby individuals.
Altec is recalling 2004-2005 aerial devices and elevators because the fiberglass upper boom may fail without warning, increasing the risk of serious injury or death.
Altec is recalling 2015-2016 Aerial Devices and Service Body Trucks due to a wiring defect that may cause a short circuit and increase fire risk.
Altec Industries is recalling 2016 DLB Digger Derrick vehicles because fasteners securing the outer rotation bearings may fail, potentially causing the boom to move unintentionally.
Altec is recalling 2015-2016 AH125, AH150, and HL125 aerial devices because rotation bearing fasteners may fail, posing a risk of injury or death.
Altec is recalling 2005-2016 telescoping aerial devices because the winch brake may be improperly oriented, potentially causing unexpected winch line movement and injury.
Altec is recalling 1995-1999 Aerial Device trucks because a boom lift cylinder defect could cause uncontrolled movement, increasing injury risk.
Altec is recalling 219 model year 2014-2015 aerial devices because an improperly sized boom tip cover opening may allow contact with energized conductors, increasing injury risk.
Altec is recalling 252 model year 2015-2016 Aerial Devices and Digger Derricks because a hydraulic motor shaft may fail, causing unexpected winch movement and increasing injury risk.
Altec is recalling 2014-2016 Digger Derricks because rotation bearing fasteners may not be properly torqued, posing a risk of structural failure and injury.
Altec Industries is recalling 2015 Effer 440 and 470 Knuckle Boom Cranes because pedestal welds may crack, potentially causing the crane to fall and injure people.
Altec is recalling 2010-2015 AH75, AH85, and AH100 aerial devices because a hydraulic valve may allow unexpected movement, increasing injury risk.
Community-sourced company facts from Wikidata, not from any recall agency. This is background on the corporate entity — it says nothing about the recall(s) listed on this page, which come from the agency source notice above.
ALTEC
company in the Czech Republic
Source: Wikidata (Q54941310), licensed CC0. Wikidata is community-edited and may not reflect the current corporate structure.