The Recall Desk

State

New Hampshire product recalls

73,741 recalls have nationwide distribution and so reach New Hampshire. 4,482 additional recalls listed New Hampshire specifically in their distribution scope.

What the numbers show

Total
4,482
Critical
603
Severe
1,048
Most recent
2026-10-28

Of the 4,482 recalls naming New Hampshire we have scored against our rubric, 603 (13%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 1,048 (23%) are Severe.

Which agencies issued them

These figures cover only the 4,482 recalls whose distribution notice names New Hampshire specifically. The 73,741 nationwide recalls listed below reach every state, so counting them here would make every state page show the same numbers.

35451–35475 of 78223

  • HighFDA (Devices)·Z-1388-2019·2019-05-29

    Stryker Visum LED Surgical Lighting System Component Recall

    Stryker is recalling 3,176 EDS Light Suspension components for the Visum LED Surgical Lighting System due to a potential assembly defect in the joint.

    Product
    EDS Light Suspension, Central Axis, a component of the Stryker Visum LED Surgical Lighting System, with the following catalog numbers: 0682001286, EDS Light Suspension, Central Axis, 5P/FP; 0682001298, EDS Light Suspension, Central Axis, 5P; 0682001299, EDS Light Suspension…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1418-2019·2019-05-29

    Zimmer GmbH Recalls 26mm Orthopedic Drills Due to Material Concerns

    Zimmer GmbH is recalling 26mm orthopedic drills that may have been manufactured from a different material than specified.

    Product
    Drill, 26mm stop, 1.4x81mm, AO, Item Number 502015124
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1454-2019·2019-05-29

    Zimmer GmbH Recalls MaxiCan 4.5 Countersink Due to Material Concerns

    Zimmer GmbH is recalling MaxiCan 4.5 countersinks because they may be made from a different material than specified. The products were distributed to 40 US states.

    Product
    MaxiCan 4.5 countersink, cannulated, AO, Item Number 503004177
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1458-2019·2019-05-29

    Zimmer CBS 4.0 Countersink Recalled for Material Specification Deviation

    Zimmer GmbH is recalling CBS 4.0 countersinks because they may have been manufactured from a material different from the defined specifications.

    Product
    CBS 4.0 countersink, cannulated, 15mm stop, AO, Item Number 503004352
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1448-2019·2019-05-29

    Zimmer GmbH Recalls V-TEK IVP Step Drills Due to Material Concerns

    Zimmer GmbH is recalling V-TEK IVP step drills because an investigation found they may be made from a different material than specified.

    Product
    V-TEK", IVP step drill 2.5-3.9x124mm, 16mm stop, contra-angle, Item Number 502015637
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1486-2019·2019-05-29

    Zimmer GmbH Recalls Contra-Angle Drills Due to Material Concerns

    Zimmer GmbH is recalling contra-angle drills that may have been manufactured from a different material than specified.

    Product
    Drill, contra-angle, 1.5x85mm, Item Number ST502015706
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1430-2019·2019-05-29

    Zimmer GmbH Recalls 2.7mm Orthopedic Drills Due to Material Concerns

    Zimmer GmbH is recalling 2.7mm orthopedic drills because they may be made from a different material than specified. The products were distributed to 40 US states.

    Product
    Drill for 2.7mm screw, 2x120mm, AO, Item Number 502015212
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1466-2019·2019-05-29

    Zimmer V-TEK Cannulated AO Screws Recalled for Material Specification Deviation

    Zimmer GmbH is recalling V-TEK standard-countersink, cannulated, AO screws because they may have been manufactured from a material different from the defined specifications.

    Product
    V-TEK", standard-countersink, cannulated, AO, Item Number ST28.66.111
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1481-2019·2019-05-29

    Zimmer GmbH Recalls Cannulated Drills Due to Material Specification Concerns

    Zimmer GmbH is recalling specific cannulated drills because they may have been manufactured from a material different from the defined specifications.

    Product
    Drill, cannulated, 3x90mm, round shaft, Item Number ST502015630
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1446-2019·2019-05-29

    Zimmer GmbH Recalls Cannulated Drills Due to Material Specification Concerns

    Zimmer GmbH is recalling specific cannulated drills because they may have been manufactured from a material different from the defined specifications.

    Product
    Drill, cannulated, 3.5x90mm, round shaft, Item Number 502015635
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1415-2019·2019-05-29

    Stryker 15mm Drill Recalled for Potential Material Deviation

    Zimmer GmbH is recalling Stryker 15mm drills because an investigation found they may have been manufactured from a different material than specified.

    Product
    Drill, 15mm stop, 1x83mm, Stryker, Item Number 502015114
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1472-2019·2019-05-29

    Zimmer GmbH Recalls 3.5mm Orthopedic Drill Due to Material Concerns

    Zimmer GmbH is recalling specific 3.5mm orthopedic drills because they may have been manufactured from a different material than specified.

    Product
    Drill for 3.5mm screw, 2.5x120mm, AO, Item Number ST502015216
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1480-2019·2019-05-29

    Zimmer GmbH Recalls Cannulated Drills Due to Material Concerns

    Zimmer GmbH is recalling specific cannulated drills because they may have been manufactured from a different material than specified.

    Product
    Drill, cannulated, 2.8x120mm, AO, Item Number ST502015628
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1471-2019·2019-05-29

    Zimmer GmbH Recalls 2.7mm AO Surgical Drills Due to Material Concerns

    Zimmer GmbH is recalling 2.7mm AO surgical drills because they may have been manufactured from a material different from specifications.

    Product
    Drill for 2.7mm screw, 2x120mm, AO, Item Number ST502015212
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1425-2019·2019-05-29

    Zimmer GmbH Recalls 26mm Orthopedic Drill Due to Material Concerns

    Zimmer GmbH is recalling specific orthopedic drills because they may have been manufactured from a different material than specified.

    Product
    Drill, 26mm stop, 1.4x81mm, AO, Item Number 502015146
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1457-2019·2019-05-29

    Zimmer CBS 4.5 Countersink Recalled for Potential Material Deviation

    Zimmer GmbH is recalling CBS 4.5 countersinks because they may have been manufactured from a different material than specified.

    Product
    CBS 4.5 countersink, cannulated, 18mm stop, round-shaft, Item Number 503004351
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1423-2019·2019-05-29

    Zimmer GmbH Recalls 2.5x135mm AO Drills Due to Material Concerns

    Zimmer GmbH is recalling 2.5x135mm AO Drills because they may be made from a different material than specified. The products were distributed to 41 US states.

    Product
    Drill, 2.5x135mm, AO, Item Number 502015142
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1413-2019·2019-05-29

    Zimmer GmbH Recalls Drill System Due to Potential Material Deviation

    Zimmer GmbH is recalling Drill Sys 2.7 units because they may have been manufactured from a material different from specifications.

    Product
    Drill Sys 2.7, 2x105mm, stryker, Item Number 502015106
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1427-2019·2019-05-29

    Zimmer GmbH Recalls 2.7mm Orthopedic Drills Due to Material Concerns

    Zimmer GmbH is recalling specific 2.7mm orthopedic drills because an investigation found they may be made from a different material than specified.

    Product
    Drill for 2.7mm screw, 23mm stop, 2x103mm, AO, Item Number 502015207
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1420-2019·2019-05-29

    Zimmer GmbH Recalls 19mm Orthopedic Drills Due to Material Concerns

    Zimmer GmbH is recalling specific 19mm orthopedic drills because they may be made from the wrong material. The devices were distributed to 38 US states.

    Product
    Drill, 19mm stop, 1.9x87mm, AO, Item Number 502015131
    Category
    Medical Device
    Distribution
    42 states
  • HighFDA (Devices)·Z-1459-2019·2019-05-29

    Zimmer GmbH Recalls CBS 4.0 Countersink Due to Material Concerns

    Zimmer GmbH is recalling CBS 4.0 countersinks because they may have been manufactured from a different material than specified.

    Product
    CBS 4.0 countersink, cannulated, 30mm stop, AO, Item Number 503004353
    Category
    Medical Device
    Distribution
    42 states