Zimmer GmbH Recalls Cannulated Drills Due to Potential Material Deviation
Zimmer GmbH is recalling specific cannulated drills because they may have been manufactured from a material different from the specifications.
The agency’s classification
FDA (Devices): Class II
Class II is a situation in which use of or exposure to a violative product may cause temporary or medically reversible adverse health consequences, or where the probability of serious adverse health consequences is remote.
This is the agency’s own classification, taken from its notice. The severity score below is our assessment, not the agency’s. How recall classes work
What this means for you
Our assessment, not the agency’s: severity 3/5 (High).
Real risk of harm even if no illness or injury has been reported yet. Stop using the product and follow the agency's guidance.
Our severity reasoning: The recall involves a medical device with a potential material deviation, which poses a risk of harm, but no injuries or illnesses have been reported.
Plain-English summary
Zimmer GmbH is recalling the Drill, cannulated, 2x95mm, AO, Item Number ST502015623. The recall was initiated after an investigation identified that the products were possibly manufactured from a different material than defined in the applicable specifications.
The affected products were distributed to the following US states: AL, AR, AZ, CA, CO, FL, GA, HI, IA, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MT, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, SC, TN, TX, UT, VA, WA, WI, WV, and WY. All items marked with "Normed" are affected.
Healthcare providers and consumers should stop using the affected products and contact Zimmer GmbH for further instructions.
The recalled product
- Product
- Drill, cannulated, 2x95mm, AO, Item Number ST502015623
- Manufacturer
- Zimmer GmbH
- Hazard
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (1)
- All items marked with "Normed" are affected
Distribution
Part of a larger recall action
This product is one of 76 recalled by Zimmer GmbH under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 76 products in this recall →Related recalls
Same manufacturer · Zimmer GmbH
See all →- HighBiolox Taper Sleeve Mislabeling: Wrong Component Size in Hip Replacement
FDA (Devices) · 2024-09-18
- ModerateZimmer GmbH Recalls Mislabeled Biolox Option Taper Sleeve for Hip Replacement
FDA (Devices) · 2024-09-18
- HighZimmer Femoral Nail Recall: Risk of Commingled Angle Versions
FDA (Devices) · 2021-06-09
- HighZimmer Natural Nail cephalomedullary device angle mismatch recall
FDA (Devices) · 2021-06-09
- ModerateZimmer Sidus Stem-Free Shoulder Humeral Head Recall for Incorrect Labeling
FDA (Devices) · 2019-10-09
Same hazard · material deviation
See all →- ModerateZimmer V-TEK IVP Step Drill Recalled for Material Specification Deviation
FDA (Devices) · 2019-05-29
- HighZimmer V-TEK IVP Step Drill Recalled for Material Specification Deviation
FDA (Devices) · 2019-05-29
- HighZimmer V-TEK Cannulated AO Screws Recalled for Material Specification Deviation
FDA (Devices) · 2019-05-29
- HighStryker 15mm Drill Recalled for Potential Material Deviation
FDA (Devices) · 2019-05-29
- ModerateZimmer GmbH Recalls 2.7mm AO Surgical Drills Due to Material Concerns
FDA (Devices) · 2019-05-29
Similar recalls
- HighZimmer Biomet Recalls Herbert Cannulated Bone Screw System Drills
FDA (Devices) · 2017-10-04
- HighZimmer Biomet Recalls Orthopedic Surgical Drills Due to Fracture Risk
FDA (Devices) · 2017-10-04
- SevereZimmer Biomet Recalls Straight Shank Drill Bits Due to Fracture Risk
FDA (Devices) · 2017-10-04
- HighZimmer Biomet Recalls Orthopedic Surgical Instruments Due to Material Anomaly
FDA (Devices) · 2017-10-04
- HighZimmer Biomet Recalls Orthopedic Drill Pilot Tips Due to Fracture Risk
FDA (Devices) · 2017-10-04
- HighZimmer Biomet Recalls Orthopedic Drill Bits Due to Material Anomaly
FDA (Devices) · 2017-10-04