Synthes Recalls Titanium Single Vector Distractor Bodies Due to Fastener Separation Risk
Synthes (USA) Products LLC is voluntarily recalling 182 units of Titanium Single Vector Distractor Bodies because the fastener may separate prematurely from the Proximal Foot Plate.
What this means for you
Real risk of harm even if no illness or injury has been reported yet. Stop using the product and follow the agency's guidance.
Our severity reasoning: The recall is classified as FDA Class II, and the hazard involves a structural defect in a medical device that could lead to injury, but no specific injuries or illnesses are reported in the source text.
Plain-English summary
Synthes (USA) Products LLC is voluntarily recalling 182 units of the Titanium Single Vector Distractor Body with Left Foot/20mm (Catalog ID 487.963). The recall is initiated due to a possibility that the fastener on the distractor body may become prematurely separated from the Proximal Foot Plate.
The affected devices are intended for mandibular bone lengthening where gradual bone distraction is required, including conditions such as congenital mandibular deficiencies or post-traumatic defects. The recall includes units with Part #487.963 and Lot # A4JX956, manufactured between June 9, 1999, and April 26, 2016, with expiration dates ranging from March 22, 2020, to April 26, 2036.
The affected units were distributed nationwide in the United States to the states of AZ, CA, CO, DC, FL, IL, MA, MI, NJ, NY, PA, TX, UT, WI, and WV, as well as to Australia, Canada, and Switzerland. Healthcare providers and patients should contact Synthes (USA) Products LLC for further instructions regarding the recall.
The recalled product
- Product
- TI Single Vector Distractor Body with Left Foot/20mm; Catalog ID 487.963 The Titanium Single Vector Distractor and Proximal Foot Plates are intended for mandibular bone lengthening where gradual bone distraction is required, including conditions such as congenital mandibular d
- Manufacturer
- Synthes (USA) Products LLC
- Affected units
- 182
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (20)
- Part #487.963
- Lot # A4JX956
- 4038561
- 4091230
- 4281408
- 4294703
- 4454536
- 4475459
- 5041111
- 5041112
- 5414450
- 5414451
- 5505099
- 5505140
- 5621104
- 5621108
- 5621109
- 5621110
- 6291848
- 6879052
Distribution
Part of a larger recall action
This product is one of 6 recalled by Synthes (USA) Products LLC under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 6 products in this recall →Related recalls
Same manufacturer · Synthes (USA) Products LLC
See all →- HighVOLT locking screw taps swapped between lots carry incorrect thread
FDA (Devices) · 2026-04-08
- HighVOLT bone taps swapped between lots carry the incorrect thread
FDA (Devices) · 2026-04-08
- ModerateLocking bone screws recalled after packaging labeled with the wrong length
FDA (Devices) · 2025-10-29
- ModerateForty six millimetre locking screws recalled over wrong length on packaging
FDA (Devices) · 2025-10-29
- HighSurgical screwdrivers recalled for failure to engage with implant screws
FDA (Devices) · 2024-06-05
Same hazard · structural defect
See all →- HighCanon Medical Alphenix X-ray Systems Recalled for Loose Ceiling Screws
FDA (Devices) · 2026-09-02
- HighLight Boy Recalls GBX12SK Light Towers Due to Frame Bending Risk
NHTSA · 2026-09-01
- SevereKmaier Infant Walkers Recalled for Serious Fall Hazard
CPSC · 2026-08-27
- Highrestor3d Recalls Veritas Standard Glenoid Baseplates Due to Machining Defect
FDA (Devices) · 2026-08-26
- SevereFord Recalls 2026 Maverick, F-150, and Bronco Sport for Joint Issues
NHTSA · 2026-08-25