Terumo Sarns Modular Perfusion System 8000 Recalled for Air Bubble Detection Malfunctions
Terumo is recalling 310 Sarns Modular Perfusion System 8000 units worldwide due to reported malfunctions in the Air Bubble Detection System, including false alarms and over-sensitivity.
What this means for you
Real risk of harm even if no illness or injury has been reported yet. Stop using the product and follow the agency's guidance.
Our severity reasoning: The recall is classified as FDA Class II. The hazard involves a medical device malfunction (false alarms/over-sensitivity) in a critical life-support system, which poses a risk of harm, but the source text does not report any specific injuries or fatalities.
Plain-English summary
Terumo Cardiovascular Systems Corporation is recalling 310 units of the Sarns Modular Perfusion System 8000 base, 5 pump 220/240V. The affected units are identified by Catalog Number 16406 and serial numbers 1001-1823. These devices are indicated for use in extracorporeal circulation of blood for arterial perfusion, regional perfusion, and cardiopulmonary bypass procedures.
The recall was initiated after the manufacturer received several reports over the last three years of malfunctions in the Air Bubble Detection System. These malfunctions manifested as over-sensitivity and false alarms, with various root causes identified. The issues occurred in systems that were either excluded from prior corrective actions or in systems where previous fixes did not resolve the problem.
The affected units were distributed worldwide, including the United States and numerous international locations such as Canada, Mexico, and various countries in Europe, Asia, and South America. The source text does not specify instructions for consumers or healthcare providers regarding the next steps for these devices.
The recalled product
- Product
- Sarns Modular Perfusion System 8000 base, 5 pump 220/240V. The Sarns Modular Perfusion System 8000 is indicated for use for up to 6 hours on the extracorporeal circulation of blood for arterial perfusion, regional perfusion, and cardiopulmonary bypass procedures, when used by
- Manufacturer
- Terumo Cardiovascular Systems Corporation
- Affected units
- 310
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (1)
- Catalog Number 16406 and serial number 1001-1823
Distribution
Distributed nationwide across the United States.
Part of a larger recall action
This product is one of 11 recalled by Terumo Cardiovascular Systems Corporation under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 11 products in this recall →Related recalls
Same manufacturer · Terumo Cardiovascular Systems Corporation
See all →- HighCDI OneView System BPM Probe temperature sensor measurement inaccuracy
FDA (Devices) · 2025-07-02
- HighTerumo CDI OneView Monitor Probe May Fail to Display Oxygen Saturation Data
FDA (Devices) · 2025-04-09
- HighCardiovascular Procedure Kits Recalled for Pressure Relief Valve Defect
FDA (Devices) · 2024-04-10
- HighCAPIOX FX25 Oxygenator Recalled for Potential Leaks from Improper Bonding
FDA (Devices) · 2023-04-12
- HighTerumo Recalls CAPIOX NX19 Oxygenator Due to Improper Bonding
FDA (Devices) · 2023-04-12
Same hazard · device malfunction
See all →- HighPhilips Incisive CT Recalled for Potential Failure to Trigger Clinical Scan
FDA (Devices) · 2026-09-02
- HighBD Needle Kit for Powered Driver Recall Due to Removal Difficulty
FDA (Devices) · 2026-08-26
- HighBoston Scientific Recalls Suture Cinch Endoscopic Tissue Approximation Devices
FDA (Devices) · 2026-08-26
- HighIntegrated Medcraft Recalls First Aid Kits with Defective Airway Tips
FDA (Devices) · 2026-08-12
- SevereStryker AHTO Tube Set Packaging Recalled for Handpiece Leaking
FDA (Devices) · 2026-08-12