The Recall Desk

State

US Virgin Islands product recalls

73,596 recalls have nationwide distribution and so reach US Virgin Islands. 178 additional recalls listed US Virgin Islands specifically in their distribution scope.

What the numbers show

Total
178
Critical
12
Severe
39
Most recent
2026-10-21

Of the 178 recalls naming US Virgin Islands we have scored against our rubric, 12 (7%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 39 (22%) are Severe.

These figures cover only the 178 recalls whose distribution notice names US Virgin Islands specifically. The 73,596 nationwide recalls listed below reach every state, so counting them here would make every state page show the same numbers.

28601–28625 of 73774

  • ModerateFDA (Devices)·Z-2280-2020·2020-06-17

    Siemens ADVIA Chemistry Fructosamine Reagent Recalled for Potential Interference

    Siemens is recalling ADVIA Chemistry Fructosamine Reagent because acetaminophen metabolites may interfere with test results, potentially affecting diabetic patient monitoring.

    Product
    ADVIA Chemistry Fructosamine Reagent (FRUC), Siemens Material Number 10361941, UDI Number 00630414558073 - Product Usage: use in the quantitative measurement of glycated protein (fructosamine) in human serum and plasma for monitoring the blood glucose levels of diabetic patients…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2286-2020·2020-06-17

    Ormco Damon Q2 Orthodontic Bracket Recalled for Packaging Labeling Error

    Ormco/Sybronendo is recalling 2,189 units of Damon Q2 Orthodontic Metal Brackets because the bracket torque was mislabeled on the packaging.

    Product
    Ormco Damon Q2 Orthodontic Metal Bracket, Part No. 491-9834, L3R Hi Tq Hook, Tq +13 degrees, Rx. Manufactured by Ormco Corporation, This device is intended for use for the orthodontic movement of teeth. It is used temporarily and is removed after orthodontic treatment has…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2292-2020·2020-06-17

    Olympus ENF-GP2 Fiberscope Recalled for Missing O Ring

    Olympus is recalling 19 ENF-GP2 Rhino-Laryngo Fiberscopes because they may be missing an O ring after being repaired with an incorrect service manual.

    Product
    ENF-GP2 Rhino-Laryngo Fiberscope - Product Usage: is indicated for use within the nasal and nasopharyngeal lumen.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2312-2020·2020-06-17

    Biomet Recalls Proximal Humerus Plate Templates Due to Incomplete Design History

    Biomet is recalling 78 units of A.L.P.S. Proximal Humerus Plate Templates because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. PROXIMAL HUMERUS PLATING SYSTEM PROXIMAL HUMERUS PLATE TEMPLATE 90MM, Item Number: 110025471 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2315-2020·2020-06-17

    Biomet Recalls Proximal Humerus Plating System Due to Incomplete Design History

    Biomet is recalling A.L.P.S. Proximal Humerus Plating System units because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S.¿ PROXIMAL HUMERUS PLATING SYSTEM LOW PLATE LEFT 11 HOLE 190MM, Item Number: 110030108 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2303-2020·2020-06-17

    Biomet 6.5 Cannulated Screw Tap Recalled for Incomplete Design History

    Biomet is recalling 6.5 Cannulated Screw Taps because they were distributed without completed design history files or design transfer activities.

    Product
    Biomet 6.5 Cannulated Screw Tap - Bone fixation screw, Item Number: 110008466 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2290-2020·2020-06-17

    Qiagen Recalls EGFR PCR Kits Due to False Positive Risk

    Qiagen is recalling 530 therascreen EGFR RGQ PCR Kits because a fluorescence artifact can cause rare false mutation positive results.

    Product
    therascreen EGFR RGQ PCR Kit (24), Reference Number REF 870121
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2307-2020·2020-06-17

    Biomet Recalls A.L.P.S. Proximal Humerus Plating System Drill Block Guide Sleeve

    Biomet is recalling A.L.P.S. Proximal Humerus Plating System Drill Block Guide Sleeves because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. PROXIMAL HUMERUS PLATING SYSTEM DRILL BLOCK GUIDE SLEEVE 2.7MM, Item Number: 110017563 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2287-2020·2020-06-17

    Alcon Recalls AcrySof IQ Intraocular Lenses Due to Incorrect Diopter

    Alcon Research LLC is recalling 84 units of AcrySof IQ intraocular lenses because they have an incorrect diopter. The lenses were distributed nationwide.

    Product
    Acrysof, IQ IOL w/UltraSert System, AcrySof IQ ASPHERIC IOL, 20.5 D, SP ACRYLIC FOLDABLE LENS, w/UltraSert DELIVERY SYSTEM, UV w/BLUE LIGHT FILTER. 13.0mm. LENGTH, 6.0mm ANTERIOR ASYMMETRIC BICONVEX OPTIC, PLANAR HAPTICS.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2323-2020·2020-06-17

    Biomet Recalls Proximal Humerus Plating System Due to Incomplete Design Files

    Biomet is recalling the A.L.P.S. Proximal Humerus Plating System because units were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. PROXIMAL HUMERUS PLATING SYSTEM HIGH PLATE RIGHT 11 HOLE 197MM, Item Number: 110030408 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2308-2020·2020-06-17

    Biomet A.L.P.S. Cortical Screw Recalled for Incomplete Design History

    Biomet is recalling A.L.P.S. T15 Low Profile Cortical Screws because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. T15 LOW PROFILE CORTICAL SCREW 3.5mm x 28mm, Item Number: 110017628 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2294-2020·2020-06-17

    Eizo RadiForce RX360 Medical Monitor Recalled for Display Defect

    Eizo Corporation is recalling 1,466 RadiForce RX360 medical monitors because a marble pattern may infrequently appear on the display under certain conditions.

    Product
    RadiForce RX360, model 0FTD2346 - Product Usage: is a color LCD monitor indicated for use in displaying radiological images for review, analysis, and diagnosis by trained medical practitioners. The display is not intended for mammography.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2319-2020·2020-06-17

    Biomet Proximal Humerus Plating System Recalled for Design History Deficiencies

    Biomet is recalling A.L.P.S. Proximal Humerus Plating System units because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. PROXIMAL HUMERUS PLATING SYSTEM HIGH PLATE LEFT 7 HOLE 140MM, Item Number: 110030307 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2316-2020·2020-06-17

    Biomet Recalls Proximal Humerus Plating System Due to Incomplete Design Files

    Biomet is recalling 16 units of the A.L.P.S. Proximal Humerus Plating System because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S.¿ PROXIMAL HUMERUS PLATING SYSTEM LOW PLATE LEFT 14 HOLE 227MM, Item Number: 110030109 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2306-2020·2020-06-17

    Biomet A.L.P.S Proximal Humerus Plating System Drill Block Guide Sleeve Recalled

    Biomet is recalling A.L.P.S Proximal Humerus Plating System Drill Block Guide Sleeves because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S PROXIMAL HUMERUS PLATING SYSTEM DRILL BLOCK GUIDE SLEEVE 3.2MM, Item Number: 110017553 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2324-2020·2020-06-17

    Biomet A.L.P.S. Proximal Humerus Plating System Recalled for Design History Deficiencies

    Biomet is recalling A.L.P.S. Proximal Humerus Plating System units because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. PROXIMAL HUMERUS PLATING SYSTEM HIGH PLATE RIGHT 14 HOLE 234MM, Item Number: 110030409 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2358-2020·2020-06-17

    BD FACS Sample Prep Assistant III Recalled for Probe Wear Issues

    Becton, Dickinson and Company is recalling 467 units of the BD FACS Sample Prep Assistant III because probes may wear prematurely, causing sample dispensing failures.

    Product
    BD FACS Sample Prep Assistant (SPA) III - Product Usage: Prep Assistant III is intended to prepare human whole blood for flow cytometric analysis on BD FACSCanto II and BD FACSCalibur flow cytometry systems. Pipetting blood, reagents, and lysing solution using the following…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2310-2020·2020-06-17

    Biomet A.L.P.S. T15 Multi-Directional Locking Screw Recalled for Design History Deficiencies

    Biomet is recalling A.L.P.S. T15 Multi-Directional Locking Screws because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. T15 Multi-Directional Locking Screw 3.5mm x 60mm, Item Number: 110017960 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2309-2020·2020-06-17

    Biomet A.L.P.S. Proximal Humerus Plating System Drill Bit Recalled

    Biomet is recalling A.L.P.S. Proximal Humerus Plating System 3.2mm Calibrated Drill Bits because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. PROXIMAL HUMERUS PLATING SYSTEM 3.2MM CALIBRATED DRILL BIT, Item Number: 110017737 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2293-2020·2020-06-17

    Eizo RadiForce GX560 Monochrome LCD Monitor Recalled for Display Defect

    Eizo Corporation is recalling 96 RadiForce GX560 monochrome LCD monitors because a marble pattern may infrequently appear on the screen under certain conditions.

    Product
    RadiForce GX560 monochrome LCD monitor, models 0FTD2347 and 0FTD2379 - Product Usage: is indicated for use in displaying radiological images (including full-field digital mammography and digital breast tomosynthesis) for review, analysis, and diagnosis by trained medical…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2304-2020·2020-06-17

    Biomet 8.0 Cannulated Screw Tap Recalled for Incomplete Design History Files

    Biomet is recalling 8.0 Cannulated Screw Taps because they were distributed without completed design history files or design transfer activities.

    Product
    Biomet 8.0 Cannulated Screw Tap-Bone fixation screw Item Number: 110008467 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2356-2020·2020-06-17

    BD FACS Sample Prep Assistant II Recalled for Probe Wear Issues

    Becton, Dickinson and Company is recalling 95 units of the BD FACS Sample Prep Assistant II because probes may wear prematurely, causing sample dispensing failures.

    Product
    BD FACS Sample Prep Assistant (SPA) II - Product Usage: K050191: The BD FACSCanto system with BD FACSCanto clinical software when used with the BD FACS Sample Prep Assistant II /III is intended for use as an in vitro diagnostic device for identification and enumeration of…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2301-2020·2020-06-17

    Immuno-Mycologics Recalls Histoplasma ID Antigen Due to Contamination

    Immuno-Mycologics is recalling 155 vials of Histoplasma ID Antigen because potential reagent contamination may cause false positive test results.

    Product
    Histoplasma Immunodiffusion (ID) Antigen; The IFU labeling is for multiple products which included Fungal Antigens, Positive Controls and ID Plates,and Immunodiffusion (ID) Plates for use in the ID Test, Histoplasma ID Antigen
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2314-2020·2020-06-17

    Biomet Recalls Proximal Humerus Plate Templates Due to Incomplete Design Files

    Biomet is recalling A.L.P.S. Proximal Humerus Plate Templates because they were distributed without completed design history files or design transfer activities.

    Product
    A.L.P.S. PROXIMAL HUMERUS PLATING SYSTEM PROXIMAL HUMERUS PLATE TEMPLATE 234MM Item Number: 110025473 - Product Usage: Intended for temporary internal fixation and stabilization of osteotomies and fractures during the normal healing process.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-2281-2020·2020-06-17

    Siemens Atellica CH Fructosamine Reagent Recalled for Acetaminophen Interference

    Siemens Healthcare Diagnostics is recalling Atellica CH Fructosamine Reagent because acetaminophen metabolites may interfere with test results.

    Product
    Atellica CH Fructosamine Reagent (FRUC), Siemens Material Number 11097637, UDI Number 00630414595580 use in the quantitative measurement of glycated protein (fructosamine) in human serum and plasma for monitoring the blood glucose levels of diabetic patients over the preceding…
    Category
    Medical Device
    Distribution
    Distributed nationwide