The Recall Desk

State

Montana product recalls

73,584 recalls have nationwide distribution and so reach Montana. 3,572 additional recalls listed Montana specifically in their distribution scope.

What the numbers show

Total
3,572
Critical
689
Severe
952
Most recent
2026-10-14

Of the 3,572 recalls naming Montana we have scored against our rubric, 689 (19%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 952 (27%) are Severe.

Which agencies issued them

These figures cover only the 3,572 recalls whose distribution notice names Montana specifically. The 73,584 nationwide recalls listed below reach every state, so counting them here would make every state page show the same numbers.

27376–27400 of 77156

  • HighFDA (Devices)·Z-0767-2021·2021-01-13

    Linet Eleganza 5 Adjustable Bed Recalled for Side Rail Malfunction

    Linet Spol. S.r.o. is recalling 518 Eleganza 5 adjustable beds because a side rail component may malfunction, causing the rail to fail to lock or become stuck in the upper position.

    Product
    Eleganza 5 (AC powered adjustable bed), Item Numbers: a) 1GE512055-40, b) 1GE512055-45, c) 1GE512055-85, and d) 1GE512055-95 - Product Usage: Eleganza 5 is a positionable bed for intensive care. Its purpose is to support patient and to facilitate treatment and manipulation with…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighCPSC·21067·2021-01-13

    Juratoys Recalls Janod Toy Trumpets Due to Choking Hazard

    Juratoys is recalling Janod Toy Confetti Trumpets because small plastic pieces can come loose and pose a choking hazard to children.

    Product
    Janod Toy Confetti Trumpets
    Category
    Consumer Product
    Distribution
    Distributed nationwide
  • HighCPSC·21068·2021-01-13

    Sea to Summit Recalls Camping Pots Due to Burn and Scald Hazards

    Sea to Summit is recalling Alpha and Sigma camping pots because the nylon latch can disengage, causing the handle to detach and posing burn and scald hazards.

    Product
    Sea to Summit Alpha and Sigma camping pots
    Category
    Consumer Product
    Distribution
    Distributed nationwide
  • HighCPSC·21066·2021-01-13

    Belkin Recalls Portable Wireless Chargers Due to Fire and Shock Hazards

    Belkin is recalling about 2,280 Portable Wireless Charger + Stand Special Edition units because a manufacturing defect can cause overheating, posing fire and shock risks.

    Product
    Belkin "Portable Wireless Charger + Stand Special Edition"
    Category
    Consumer Product
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0784-2021·2021-01-13

    Accuray TomoTherapy System Recalled for MLC Tickling Error

    Accuray is recalling seven TomoTherapy Treatment Systems because an MLC tickling error may cause the delivered radiation dose to rotate from the planned dose.

    Product
    TomoTherapy Treatment System - Product Usage: used as an integrated system for the planning and precise delivery of radiation therapy, stereotactic radiotherapy, or stereotactic radiosurgery to tumors or other targeted tissues while minimizing the delivery of radiation to vital…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0768-2021·2021-01-13

    Baxter MiniCap Extended Life PD Transfer Set Recalled for Leak Risk

    Baxter Healthcare is recalling 72,771 units of MiniCap Extended Life PD Transfer Sets due to a potential for no-flow and leaks under the twist clamp.

    Product
    MiniCap Extended Life PD Transfer Set
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0777-2021·2021-01-13

    Boston Scientific Recalls Hot AXIOS Stent Delivery Systems Due to Fitting Detachment

    Boston Scientific is recalling Hot AXIOS Stent delivery systems because a fitting may detach, risking leakage of bodily contents into the peritoneal cavity.

    Product
    Hot AXIOS Stent and Electrocautery - Enhanced Delivery System 10mm x15mm (OUS) UPN: M00553550 - Product Usage: The stent is intended for implantation up to 60 days and should be removed upon confirmation of pseudocyst or walled-off necrosis resolution.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0792-2021·2021-01-13

    Steris Recalls Vis-U-All Heat Seal Pouches Due to Ink Migration

    Steris Corporation is recalling Vis-U-All High Temp Heat Seal Pouches because purple ink on the exterior label may bleed after steam processing, causing cosmetic defects and potential ink transfer to devices.

    Product
    Vis-U-All High Temp 7.5"x13.5" Heat Seal Pouch 200 pouches per box; 5 boxes per case Model Number: 883713
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0772-2021·2021-01-13

    Smith & Nephew Recalls Trigen Intertan Bone Fixation Nails for Packaging Error

    Smith & Nephew is recalling 41 units of Trigen Intertan bone fixation nails due to a manufacturing packaging error. The devices were distributed nationwide and in Australia, Canada, and the UK.

    Product
    Bone fixation nail. TRIGEN INTERTAN - Product Usage: indicated for fractures of the femur including simple shaft fractures, comminuted shaft fractures, spiral shaft fractures, long oblique shaft fractures and segmental shaft fracture;
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0788-2021·2021-01-13

    Steris Recalls Vis-U-All High Temperature Tubing Due to Ink Migration

    Steris Corporation is recalling Vis-U-All High Temperature Tubing because purple ink on the outside label may bleed during steam processing, causing cosmetic defects and potential ink transfer to devices.

    Product
    Vis-U-All High Temperature Tubing 6"x100'. One roll per box; 10 boxes per case 10 rolls/cs Model Number: 881061
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0770-2021·2021-01-13

    Ortho VITROS CKMB Slides Recalled for Potential Falsely Elevated Results

    Ortho Clinical Diagnostics is recalling VITROS CKMB Slides because CK-MM interference may cause falsely elevated creatine kinase MB results.

    Product
    VITROS Chemistry Products CKMB Slides: (1)VITROS CKMB Slides (60 Slide cartridge) Product Code:8058232 (2)VITROS CKMB Slides (18 Slide cartridge) Product Code: 8001133 Quantitatively measure creatine kinase MB (CK-MB) activity in serum using VITROS 250/350/5,1…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0786-2021·2021-01-13

    Steris Recalls Vis-U-All High Temperature Tubing Due to Ink Migration

    Steris Corporation is recalling Vis-U-All High Temperature Tubing because purple ink on the exterior label may bleed during steam processing, causing cosmetic defects and potential ink transfer to devices.

    Product
    Vis-U-All High Temperature Tubing 3"x100'. One roll per box; 10 boxes per case 10 rolls/cs Model Number: 881031
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0793-2021·2021-01-13

    Steris Recalls Vis-U-All Pouches Due to Ink Migration

    Steris Corporation is recalling Vis-U-All High Temp Self Seal Pouches because purple ink on the exterior label may bleed during steam processing.

    Product
    Vis-U-All High Temp 3.5"x9" Self Seal Pouch 200 pouches per box; 4 boxes per case Model Number: 884039
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0790-2021·2021-01-13

    Steris Recalls Vis-U-All Heat Seal Pouches Due to Ink Migration

    Steris Corporation is recalling Vis-U-All High Temp Heat Seal Pouches because purple ink on the exterior label may bleed during steam processing, causing cosmetic defects and potential ink transfer to devices inside.

    Product
    Vis-U-All High Temp 4.5"x11" Heat Seal Pouch 200 pouches per box; 5 boxes per case Model Number: 883411
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Drugs)·D-0201-2021·2021-01-13

    SCA Pharmaceuticals Recalls Morphine Sulfate Syringes Due to Sterility Concerns

    SCA Pharmaceuticals is recalling 751 syringes of Morphine Sulfate 3 mg/3 mL due to a lack of assurance of sterility and potential defective caps.

    Product
    Morphine Sulfate 3 mg/3 mL in 0.9% Sodium Chloride (1mg/mL) CII, Rx Only, 3 ml Single Dose Syringe, SCA Pharmaceuticals, 755 Rainbow Rd., Windsor, CT, 06095, barcode 70004010025
    Category
    Drug
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0795-2021·2021-01-13

    Steris Vis-U-All Pouches Recalled for Ink Migration Defect

    Steris Corporation is recalling Vis-U-All High Temp Self Seal Pouches because purple ink on the exterior label may bleed during steam processing.

    Product
    Vis-U-All High Temp 4"x11" Self Seal Pouch 200 pouches per box; 4 boxes per case Model Number: 884411
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0787-2021·2021-01-13

    Steris Vis-U-All High Temperature Tubing Recalled for Ink Migration

    Steris Corporation is recalling Vis-U-All High Temperature Tubing because purple ink on the exterior label may bleed during steam processing, causing cosmetic defects and potential ink transfer to devices.

    Product
    Vis-U-All High Temperature Tubing 4"x100'. One roll per box; 10 boxes per case 10 rolls/cs Model Number: 881041
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0799-2021·2021-01-13

    Steris Vis-U-All Pouches Recalled for Ink Migration on Exterior Labels

    Steris Corporation is recalling Vis-U-All High Temp Self Seal Pouches because purple ink on the exterior label may bleed during steam processing, causing cosmetic defects or ink transfer to devices.

    Product
    Vis-U-All High Temp 8"x16" Self Seal Pouch 200 pouches per box; 4 boxes per case Model Number: 884816
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0794-2021·2021-01-13

    Steris Vis-U-All Pouches Recalled for Ink Migration

    Steris Corporation is recalling Vis-U-All High Temp Self Seal Pouches because purple ink on the exterior label may migrate during steam processing, causing cosmetic defects and potential ink transfer to devices.

    Product
    Vis-U-All High Temp 13"x18" Self Seal Pouch 100 pouches per box; 4 boxes per case Model Number: 884118
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0797-2021·2021-01-13

    Steris Recalls Vis-U-All Pouches Due to Ink Migration Defects

    Steris Corporation is recalling Vis-U-All High Temp Self Seal Pouches because purple ink on the exterior label may bleed during steam processing.

    Product
    Vis-U-All High Temp 5"x15" Self Seal Pouch 200 pouches per box; 4 boxes per case Model Number: 884515
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0791-2021·2021-01-13

    Steris Vis-U-All Heat Seal Pouches Recalled for Ink Migration

    Steris Corporation is recalling Vis-U-All High Temp Heat Seal Pouches because purple ink on the exterior label may bleed during steam processing.

    Product
    Vis-U-All High Temp 6"x10" Heat Seal Pouch 200 pouches per box; 5 boxes per case Model Number: 883610
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0796-2021·2021-01-13

    Steris Recalls Vis-U-All Pouches Due to Ink Migration

    Steris Corporation is recalling Vis-U-All High Temp Self Seal Pouches because purple ink on the exterior label may bleed during steam processing.

    Product
    Vis-U-All High Temp 5.5"x10" Self Seal Pouch 200 pouches per box; 4 boxes per case Model Number: 884510
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0798-2021·2021-01-13

    Steris Recalls Vis-U-All Pouches Due to Ink Migration Defects

    Steris Corporation is recalling Vis-U-All High Temp Self Seal Pouches because purple ink on the exterior label may bleed during steam processing, causing cosmetic defects and potential ink transfer to devices.

    Product
    Vis-U-All High Temp 7.5"x13" Self Seal Pouch 200 pouches per box; 4 boxes per case Model Number: 884713
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • LowFDA (Devices)·Z-0789-2021·2021-01-13

    Steris Recalls Vis-U-All High Temperature Tubing Due to Ink Migration

    Steris Corporation is recalling Vis-U-All High Temperature Tubing because purple ink on the exterior label may bleed during steam processing, causing cosmetic defects and potential ink transfer to devices inside the pouch.

    Product
    Vis-U-All High Temperature Tubing 9"x100'. One roll per box; 10 boxes per case 6 rolls/cs Model Number: 881091
    Category
    Medical Device
    Distribution
    Distributed nationwide