Recalls
Searchable archive of product recalls from the FDA, USDA FSIS, CPSC, NHTSA, and EPA — translated into plain English, severity-scored from objective criteria, and always linked back to the original government notice.
Every recall on this list has been scored 1–5 against an objective rubric from the agency’s own classification, presence of reported injuries or deaths, distribution scope, and hazard type. The colored severity badge on each card is the score — 5 (Critical) means deaths or serious injuries are reported, 4 (Severe) means significant injury or hospitalization risk, and 3 (High) means a known hazard with no confirmed harm yet. Filter to 3+ (High and above) if you want to skip routine Class-III notices.
The agency chips above control which streams are visible. FDA spans food, drugs, and medical devices. USDA FSIS is meat, poultry, and processed egg products. CPSC is household consumer products. NHTSA is vehicles, tires, and child seats. Nationwide on a card means the recall affects every US state — most do — while a state list means distribution was limited.
Click any recall to see the full summary, affected lot codes and model numbers, the agency’s own classification, and a direct link back to the original government notice for verification.
Minimum severity
Instrumentation Laboratory is recalling GEM Premier 5000 part 00055430011 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Waldemar Link is recalling Endo-Model Replacement Plateau item 15-0027/12 because the bushing on a plateau screw could detach from the screw shaft due to a longitudinal fracture.
Instrumentation Laboratory is recalling GEM Premier 5000 PAK part 00055407508 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Instrumentation Laboratory is recalling GEM Premier 5000 PAK part 00055407511 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Instrumentation Laboratory is recalling GEM Premier 5000 PAK part 00055407504 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Instrumentation Laboratory is recalling GEM Premier 5000 analyzers after confirmed complaints that GEM PAK cartridges may show increased Process Control Solution Not Detected errors during warm-up.
Waldemar Link is recalling Endo-Model Replacement Plateau item 15-0027/11 because the bushing on a plateau screw could detach from the screw shaft due to a longitudinal fracture.
Beckman Coulter is recalling Chemistry Analyzer AU5800 units because leaving the calibration monitor open beyond 15 minutes can trigger database errors that stop the system analyzing.
Waldemar Link is recalling Endo-Model Replacement Plateau item 15-8521/15 because the bushing on a plateau screw could detach from the screw shaft due to a longitudinal fracture.
Beckman Coulter is recalling DxC 700 AU analyzers because leaving the calibration monitor open beyond 15 minutes can trigger database errors that stop the system analyzing.
Instrumentation Laboratory is recalling GEM Premier 5000 part 00055415011 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Instrumentation Laboratory is recalling GEM Premier 5000 PAK part 00055407510 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Waldemar Link is recalling Endo-Model Replacement Plateau item 15-2835/12 because the bushing on a plateau screw could detach from the screw shaft due to a longitudinal fracture.
Instrumentation Laboratory is recalling GEM Premier 5000 part 00055445008 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Exactech is recalling the Equinoxe Core Instrument Kit, model KIT-311X, because the impactor handle may be missing a cross-pin.
Waldemar Link is recalling Endo-Model Replacement Plateau item 15-8030/12 because the bushing on a plateau screw could detach from the screw shaft due to a longitudinal fracture.
Physio-Control is recalling Infant/Child Reduced Energy Defibrillator Electrodes, catalogue numbers 11101-000016 and 11101-000017, due to pediatric defibrillator electrode delamination.
Medline is recalling Medcrest surgical gowns because the fabric may delaminate prematurely when the included laundering instructions are followed.
International Life Sciences is recalling Artelon FlexBand Plus, refs 41054 and 41057, because the augmentation devices failed bacterial endotoxin testing.
Instrumentation Laboratory is recalling GEM Premier 5000 part 00055445004 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Instrumentation Laboratory is recalling GEM Premier 5000 part 00055430008 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Instrumentation Laboratory is recalling GEM Premier 5000 part 00055415005 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Instrumentation Laboratory is recalling GEM Premier 5000 part 00055430004 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.
Waldemar Link is recalling Endo-Model SL Connection Component item 16-2840/07 because the bushing on a plateau screw could detach from the screw shaft due to a longitudinal fracture.
Instrumentation Laboratory is recalling GEM Premier 5000 PAK part 00055360011 after confirmed complaints of Process Control Solution Not Detected errors during warm-up causing cartridge ejection.