The Recall Desk

Recalls

All US Product Recalls

Searchable archive of product recalls from the FDA, USDA FSIS, CPSC, NHTSA, and EPA — translated into plain English, severity-scored from objective criteria, and always linked back to the original government notice.

How to read this listing

Every recall on this list has been scored 1–5 against an objective rubric from the agency’s own classification, presence of reported injuries or deaths, distribution scope, and hazard type. The colored severity badge on each card is the score — 5 (Critical) means the agency’s own highest classification or reported deaths or serious injuries, 4 (Severe) means significant injury or hospitalization risk, and 3 (High) means a known hazard with no confirmed harm yet. Filter to 3+ (High and above) if you want to skip routine Class-III notices.

The agency chips above control which streams are visible. FDA spans food, drugs, and medical devices. USDA FSIS is meat, poultry, and processed egg products. CPSC is household consumer products. NHTSA is vehicles, tires, and child seats. Nationwide on a card means the recall affects every US state — most do — while a state list means distribution was limited.

Click any recall to see the full summary, affected lot codes and model numbers, the agency’s own classification, and a direct link back to the original government notice for verification.

Filters

Agency

Category

Minimum severity

Clear filters

11526–11550 of 27470

  • HighFDA (Devices)·Z-1844-2021·2021-06-16

    Quanta System Sterile Optical Laser Fiber Recall for Potential Sterility Compromise

    Quanta System is recalling 307 reusable sterile optical laser fibers nationwide due to potential sterility compromise. The affected devices were distributed through six U.S. distributors.

    Product
    Quanta System Sterile Optical Laser Fiber, reusable
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1796-2021·2021-06-16

    Diagnostic MR imaging system hoisting blocks mechanical defect

    Philips is recalling 156 Ingenia Ambition S diagnostic MR systems due to a mechanical issue detected in the lifting blocks on the magnet used during equipment movement and decommissioning.

    Product
    Ingenia Ambition S - Model Number: 781359 Diagnostic MR system.
    Category
    Medical Device
    Distribution
    11 states
  • HighFDA (Devices)·Z-1804-2021·2021-06-16

    Atec Insignia Anterior Cervical Plate System Recall: Potential Screw Mechanism Failure

    Alphatec Spine is recalling 7 units of the Atec Insignia Anterior Cervical Plate System because the screw blocking mechanism could disassociate or unlock during or after surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0121, Insignia, ACP, 1-Level, 21 mm, Rx Only, Non-Sterile, UDI: (01)00190376268477
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1813-2021·2021-06-16

    Atec Insignia Anterior Cervical Plate System recall due to potential screw mechanism failure

    Alphatec Spine is recalling Atec Insignia Anterior Cervical Plate System units due to a potential defect where the screw blocking mechanism may disassociate or unlock during or after surgery. No adverse events have been reported.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0244 Insignia, ACP, 2-Level, 44 mm, Rx Only, Non-Sterile, UDI: (01)00190376268507
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1795-2021·2021-06-16

    Ingenia Ambition X MRI Systems: Mechanical Defect in Hoisting Blocks

    Philips has recalled 156 Ingenia Ambition X MRI systems due to a mechanical defect in the hoisting blocks used to move the magnet during decommissioning or relocation. The defect poses a risk that the magnet could fall.

    Product
    Ingenia Ambition X - Model Number: 781356, Diagnostic MR system. ***Updated November 2023*** Added Model Number 782109 - Ingenia Ambition X
    Category
    Medical Device
    Distribution
    11 states
  • HighFDA (Devices)·Z-1838-2021·2021-06-16

    Medical Device Software Defects in RayStation Treatment Planning System

    RayStation radiation therapy treatment planning software versions 6 through 10A contain defects that may cause misleading dose evaluations and contouring errors. Healthcare facilities should verify treatment plans and contact the manufacturer for guidance.

    Product
    RayStation (Treatment Planning System) Model Number RayStation is 6.0.0.24 , 6.1.1.2 , 6.2.0.7 , 6.3.0.6 , 7.0.0.19 , 8.0.0.6 , 8.0.1.10 , 8.1.0.47 , 8.1.1.8 , 8.1.2.5 , 9.0.0.113 , 9.1.0.933 , 9.2.0.483 , 10.0.0.1154 , 10.0.1.52 or 10.1.0.613 .
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1836-2021·2021-06-16

    ViewRay MRIdian Linac System software anomalies in non-English versions

    Viewray, Inc. is recalling MRIdian Linac System treatment delivery software in French, German, and Italian versions due to software anomalies affecting radiation therapy systems.

    Product
    ViewRay MRIdian Linac System: Model No. 20000-01 software, CE 0086 - Product Usage: intended to be used for planning external beam irradiation with photon beams and delivering stereotactic radiosurgery and precision radiotherapy for lesions, tumors, and conditions anywhere in…
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-1820-2021·2021-06-16

    Atec Insignia Anterior Cervical Plate System Screw Mechanism Recall

    Alphatec Spine is recalling the Atec Insignia Anterior Cervical Plate System due to potential disassociation or postoperative unlock of the screw blocking mechanism during or after cervical spine surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0358 Insignia, ACP, 3-Level, 58 mm, Rx Only, Non-Sterile, UDI: (01)00190376268606
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1801-2021·2021-06-16

    Anterior cervical plate system screw mechanism may disassociate during or after surgery

    Alphatec Spine's Atec Insignia Anterior Cervical Plate System has a potential defect where the screw blocking mechanism may disassociate during or after surgery, which could compromise spinal stabilization.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0118, Insignia, ACP, 1-Level, 18 mm, Rx Only, Non-Sterile, UDI: (01)00190376268446
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1797-2021·2021-06-16

    Medtronic Braive Growth Modulation System Break-Off Set Screws Recalled for Thread Defect

    Medtronic is recalling Braive Growth Modulation System Break-Off Set Screws due to a thread profile defect caused by a manufacturing issue. The defect may affect proper device function.

    Product
    Braive Growth Modulation System Break-Off Set Screws - Product Usage: intended to limit further progression of the spinal curvature and provide correction of the thoracic curve while allowing continued skeletal growth by compression of the convex side of the scoliotic curve.
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-1803-2021·2021-06-16

    Cervical Spine Plate System Screw Mechanism May Disassociate or Unlock

    Alphatec Spine recalls its Atec Insignia Anterior Cervical Plate System due to a potential defect in the screw blocking mechanism, which may disassociate or unlock during or after spinal surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0120, Insignia, ACP, 1-Level, 20 mm, Rx Only, Non-Sterile, UDI: (01)00190376268460
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1824-2021·2021-06-16

    Alphatec Insignia Cervical Plate System: Screw Mechanism Disassociation Risk

    Alphatec recalls the Insignia Anterior Cervical Plate System due to risk that the screw blocking mechanism may disassociate during or after surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0468 Insignia, ACP, 4-Level, 68 mm, Rx Only, Non-Sterile, UDI: (01)00190376268675
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1822-2021·2021-06-16

    Anterior Cervical Plate System Screw Mechanism Recall

    Alphatec Spine recalls Atec Insignia Anterior Cervical Plate Systems because the screw blocking mechanism may fail during or after surgery. The mechanism may disassociate or unlock, potentially compromising implant stability.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0362 Insignia, ACP, 3-Level, 62 mm, Rx Only, Non-Sterile, UDI: (01)00190376268620
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1842-2021·2021-06-16

    FDA Recalls Olympus Sterile Optical Laser Fibers for Potential Sterility Compromise

    Quanta System is recalling Olympus Sterile Optical Laser Fibers nationwide due to potentially compromised sterility. Approximately 26,925 units distributed through six U.S. distributors are affected.

    Product
    Olympus Sterile Optical Laser Fiber, single use and reusable
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1815-2021·2021-06-16

    Anterior Cervical Plate System Recalled for Potential Screw Mechanism Failure

    Alphatec Spine is recalling the Atec Insignia Anterior Cervical Plate System because the screw blocking mechanism could disassociate or unlock during or after cervical spine surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0250 Insignia, ACP, 2-Level, 50 mm, Rx Only, Non-Sterile, UDI: (01)00190376268538
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1846-2021·2021-06-16

    Radiotherapy positioning software may delay patient movement display

    Brainlab's ExacTrac Dynamic radiotherapy positioning software may delay display of patient movement during high-dose treatments, risking treatment precision errors. 22 systems affected across 11 U.S. states.

    Product
    ExacTrac Dynamic software, Model 20910-01B ETD Positioning and Monitoring Installer 1.0.2 - Product Usage: intended to position patients at an accurately defined point within the treatment beam of a medical accelerator for stereotactic radiosurgery or radiotherapy procedures, to…
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1814-2021·2021-06-16

    Anterior Cervical Plate System Screw Mechanism May Disassociate or Unlock

    Alphatec Spine recalls its Insignia Anterior Cervical Plate System because the screw blocking mechanism may disassociate during spinal surgery or unlock afterward. Healthcare providers should contact the manufacturer for guidance.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0248 Insignia, ACP, 2-Level, 48 mm, Rx Only, Non-Sterile, UDI: (01)00190376268521
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1827-2021·2021-06-16

    Anterior cervical plate system screw blocking mechanism defect recalled

    Alphatec Spine's Atec Insignia anterior cervical plate system has a defect in the screw blocking mechanism that could disassociate or unlock during or after surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0482 Insignia, ACP, 4-Level, 82 mm, Rx Only, Non-Sterile, UDI: (01)00190376268712
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1809-2021·2021-06-16

    Anterior cervical plate system screw blocking mechanism may disassociate

    Alphatec Spine Inc. is recalling the Atec Insignia anterior cervical plate system because the screw blocking mechanism may disassociate intraoperatively or unlock postoperatively. No injuries reported.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0236 Insignia, ACP, 2-Level, 36 mm, Rx Only, Non-Sterile, UDI: (01)00190376268385
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1823-2021·2021-06-16

    Anterior cervical plate system screw mechanism may disassociate or unlock

    The Alphatec Insignia anterior cervical plate system may have a defect where the screw blocking mechanism disassociates during surgery or unlocks afterward. Consult your doctor if you have this implant.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0364 Insignia, ACP, 3-Level, 64 mm, Rx Only, Non-Sterile, UDI: (01)00190376268637
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1811-2021·2021-06-16

    Alphatec Insignia Anterior Cervical Plate System screw locking mechanism failure

    Alphatec Spine is recalling the Insignia Anterior Cervical Plate System due to a potential failure in the screw locking mechanism. The mechanism may disassociate or unlock during or after spinal surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0240 Insignia, ACP, 2-Level, 40 mm, Rx Only, Non-Sterile, UDI: (01)00190376268408
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1817-2021·2021-06-16

    Atec Insignia Anterior Cervical Plate System Screw Blocking Mechanism Risk

    The FDA is recalling certain Atec Insignia Anterior Cervical Plate Systems due to a potential defect in the screw blocking mechanism that could disassociate or unlock during or after surgery.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0352 Insignia, ACP, 3-Level, 52 mm, Rx Only, Non-Sterile, UDI: (01)00190376268576
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1821-2021·2021-06-16

    Anterior Cervical Plate System Screw Blocking Mechanism May Disassociate

    Alphatec Spine is recalling the Atec Insignia Anterior Cervical Plate System due to a potential defect in the screw blocking mechanism. The screws may disassociate or unlock during or after surgery, risking implant failure.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0360 Insignia, ACP, 3-Level, 60 mm, Rx Only, Non-Sterile, UDI: (01)00190376268613
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1845-2021·2021-06-16

    DePuy Synthes Hip Prosthesis Recall Due to Incorrect Size Labeling

    DePuy Orthopaedics recalled 50 hip prostheses with incorrect part numbers and sizes etched on the devices. The affected Lot D20111130 was distributed domestically and to Bermuda.

    Product
    DePuy Synthes Articul/eze Femoral Head: Hip joint metal/polymer semi-constrained cemented prosthesis. Part Number: 1365-21-000, Part Description: ARTICUL/EZE BALL 32 +1 GR
    Category
    Medical Device
    Distribution
    21 states
  • HighFDA (Devices)·Z-1806-2021·2021-06-16

    Anterior Cervical Plate System Screw Lock Mechanism May Fail Intraoperatively or Postoperatively

    The Alphatec Insignia Anterior Cervical Plate System is recalled because the screw blocking mechanism may disassociate intraoperatively or unlock postoperatively. Eight units were distributed across 15 U.S. states.

    Product
    Atec Insignia Anterior Cervical Plate System, REF 136-0124, Insignia, ACP, 1-Level, 24 mm, Rx Only, Non-Sterile, UDI: (01)00190376268743
    Category
    Medical Device
    Distribution
    Distributed nationwide