The Recall Desk

Recalls

All US Product Recalls

Searchable archive of product recalls from the FDA, USDA FSIS, CPSC, NHTSA, and EPA — translated into plain English, severity-scored from objective criteria, and always linked back to the original government notice.

How to read this listing

Every recall on this list has been scored 1–5 against an objective rubric from the agency’s own classification, presence of reported injuries or deaths, distribution scope, and hazard type. The colored severity badge on each card is the score — 5 (Critical) means the agency’s own highest classification or reported deaths or serious injuries, 4 (Severe) means significant injury or hospitalization risk, and 3 (High) means a known hazard with no confirmed harm yet. Filter to 3+ (High and above) if you want to skip routine Class-III notices.

The agency chips above control which streams are visible. FDA spans food, drugs, and medical devices. USDA FSIS is meat, poultry, and processed egg products. CPSC is household consumer products. NHTSA is vehicles, tires, and child seats. Nationwide on a card means the recall affects every US state — most do — while a state list means distribution was limited.

Click any recall to see the full summary, affected lot codes and model numbers, the agency’s own classification, and a direct link back to the original government notice for verification.

Filters

Agency

Category

Minimum severity

Clear filters

28101–28125 of 40357

  • ModerateFDA (Devices)·Z-0894-2017·2016-12-28

    Busse Carpal Tunnel Surgical Packs Recalled Due to Labeling Update

    Busse Hospital Disposables is recalling Carpal Tunnel Packs because they contained Devon Light Gloves subject to a labeling update.

    Product
    CARPAL TUNNEL PACK, Surgical Instrument Tray, REF/Catalog No. 3366, STERILE, Rx Only -- busse Hospital Disposables Hauppauge, NY --- Device Listing # D190549.
    Category
    Medical Device
    Distribution
    3 states
  • ModerateFDA (Devices)·Z-0864-2017·2016-12-28

    Ortho-Clinical Diagnostics Recalls VITROS CRP Slides Due to Result Bias

    Ortho-Clinical Diagnostics is recalling VITROS CRP Slides because the diluent contains endogenous CRP, which can cause falsely high test results if not subtracted.

    Product
    VITROS CRP Slides: 1) VITROS¿ Chemistry Products CRP Slides (250 slides per sales unit), Catalog # 1926740 and 2) , VITROS¿ Chemistry Products CRP Slides (90 slides per sales unit), Catalog # 1926740
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • ModerateFDA (Devices)·Z-0859-2017·2016-12-28

    Biomet 3i Low Profile Abutment Quickbridge Recall for Unsealed Pouches

    Biomet 3i is recalling 60 units of Low Profile Abutment Quickbridge because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ABUTMENT QUICKBRIDGE An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0879-2017·2016-12-28

    OrthoPediatrics PediNail Cortical Screw Recalled for Dimensional Discrepancy

    OrthoPediatrics is recalling 22 PediNail Intramedullary Nailing System 4.5mm X 48mm Cortical Screws because they measure 50mm instead of the labeled 48mm.

    Product
    OrthoPediatrics PediNail Intramedullary Nailing System 4.5mm X 48mm Cortical Screw
    Category
    Medical Device
    Distribution
    7 states
  • LowFDA (Devices)·Z-0860-2017·2016-12-28

    Biomet 3i Low Profile Abutment Recall for Packaging Seal Defects

    Biomet 3i is recalling 108 low profile abutments because some pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ABUTMENT HEXED TEMPORARY CYLINDER An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0832-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling specific low-profile dental implant abutments because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE 30¿ ABUTMENT 4.1MM(D) X 3MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0838-2017·2016-12-28

    Biomet 3i Low Profile Dental Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 123 units of Low Profile Dental Abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE ABUTMENT 4.1MM(D) X 1MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0853-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 191 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 3MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0856-2017·2016-12-28

    Biomet 3i Dental Implant Abutment Recall for Packaging Seal Defects

    Biomet 3i is recalling 28 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ABUTMENT (HEXED) PICK-UP IMPRESSION COPING An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0850-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 204 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 1MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0847-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 175 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE 30¿ ABUTMENT 4.1MM(D) X 3MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0840-2017·2016-12-28

    Biomet 3i Low Profile Dental Abutment Recall for Packaging Seal Defects

    Biomet 3i is recalling 108 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE ABUTMENT 4.1MM(D) X 2MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0862-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 191 Low Profile Abutment units because some pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ABUTMENT (NON-HEXED) TRANSFER IMPRESSION COPING An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0857-2017·2016-12-28

    Biomet 3i Low Profile Abutment Recall for Unsealed Packaging

    Biomet 3i is recalling 458 low profile abutment impression copings because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ABUTMENT (NON-HEXED) PICK-UP IMPRESSION COPING An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0846-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 246 dental implant abutments because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE 17¿ ABUTMENT 4.1MM(D) X 2MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0828-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 127 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE 17¿ ABUTMENT 3.4MM(D) X 2MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0831-2017·2016-12-28

    Biomet 3i Low Profile Dental Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 735 low profile dental abutments because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE 17¿ ABUTMENT 4.1MM(D) X 2MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0837-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 64 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE ONE-PIECE ABUTMENT 3.4MM(D) X 4MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0861-2017·2016-12-28

    Biomet 3i Low Profile Abutment Recall for Unsealed Packaging

    Biomet 3i is recalling 1,371 low profile abutments because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ABUTMENT NON-HEXED TEMPORARY CYLINDER An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0851-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 137 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 2MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0855-2017·2016-12-28

    Biomet 3i Low Profile Abutment Healing Caps Recalled for Packaging Defects

    Biomet 3i is recalling 391 Low Profile Abutment Healing Caps because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ABUTMENT HEALING CAP An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0897-2017·2016-12-28

    PerkinElmer Recalls EnLite Neonatal TREC Kits for Missing UDI Labels

    PerkinElmer is recalling 73 EnLite Neonatal TREC Kits because the Unique Device Identifier (UDI) is missing from the outer box labels.

    Product
    EnLite Neonatal TREC Kit;an in vitro diagnostic device intended for the semi-quantitative determination of TREC (T-cell receptor excision circle) DNA in blood specimens dried on filter paper. The test is for use on the VICTOR" EnLite instrument. The test is indicated for use as…
    Category
    Medical Device
    Distribution
    2 states
  • LowFDA (Devices)·Z-0854-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 124 dental implant abutments because some product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 4MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0839-2017·2016-12-28

    Biomet 3i Low Profile One-Piece Abutment Recall for Packaging Seal Defects

    Biomet 3i is recalling 450 units of Low Profile One-Piece Abutments because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 1MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states
  • LowFDA (Devices)·Z-0834-2017·2016-12-28

    Biomet 3i Dental Implant Abutments Recalled for Packaging Seal Defects

    Biomet 3i is recalling 228 dental implant abutments because a limited number of product pouches may not have been sealed during packaging.

    Product
    BIOMET 3i CERTAIN LOW PROFILE 30¿ ABUTMENT 4.1MM(D) X 5MM(H) An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation
    Category
    Medical Device
    Distribution
    0 states