Nitinol HydroFinity Hydrophilic Guidewire Recalled for Outer Polymer Jacket Damage
Nitinol Devices and Components is recalling HydroFinity Hydrophilic Guidewires because the outer polymer jacket may be damaged during use.
What this means for you
Real risk of harm even if no illness or injury has been reported yet. Stop using the product and follow the agency's guidance.
Our severity reasoning: The recall involves a medical device with a structural defect (damaged outer polymer jacket) that poses a risk of harm during use, but the source text does not report any specific injuries or illnesses, fitting the 'High' severity criteria for risk-of-harm products where injury has not yet been reported.
Plain-English summary
Nitinol Devices and Components, Inc. is recalling the HydroFinity Hydrophilic Guidewire, a sterile medical device used to facilitate the introduction and placement of catheters and interventional devices during diagnostic or interventional procedures. The recall is due to reports that the outer polymer jacket to the core wire was damaged during use.
The affected product is the HydroFinity Hydrophilic Guidewire, Model HPRA35180, in all lots. The device is manufactured by NDC Inc. in Costa Rica for Covidien. The recall covers 8,485 units in the US and 9,595 units internationally, distributed worldwide to the US, Italy, France, Norway, Sweden, Germany, Belgium, the United Kingdom, and Canada.
Healthcare providers and facilities should stop using the affected guidewires and contact the recalling firm for instructions on how to return or dispose of the product.
The recalled product
- Product
- HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Standard Shaft, Angled Tip, 180 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydr
- Manufacturer
- Nitinol Devices and Components, Inc.
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (1)
- Model HPRA35180 - all lots.
Distribution
Distributed nationwide across the United States.
Part of a larger recall action
This product is one of 12 recalled by Nitinol Devices and Components, Inc. under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 12 products in this recall →Related recalls
Same manufacturer · Nitinol Devices and Components, Inc.
See all →- SevereNitinol Devices Recalls HydroFinity Hydrophilic Guidewires Due to Jacket Damage
FDA (Devices) · 2014-07-02
- HighNitinol HydroFinity Hydrophilic Guidewire Recalled for Outer Polymer Jacket Damage
FDA (Devices) · 2014-07-02
- HighFDA Recalls HydroFinity Hydrophilic Guidewires Due to Jacket Damage
FDA (Devices) · 2014-07-02
- HighNitinol HydroFinity Hydrophilic Guidewire Recalled for Outer Polymer Jacket Damage
FDA (Devices) · 2014-07-02
- HighNitinol HydroFinity Hydrophilic Guidewire Recalled for Polymer Jacket Damage
FDA (Devices) · 2014-07-02
Same hazard · structural defect
See all →- HighCanon Medical Alphenix X-ray Systems Recalled for Loose Ceiling Screws
FDA (Devices) · 2026-09-02
- HighLight Boy Recalls GBX12SK Light Towers Due to Frame Bending Risk
NHTSA · 2026-09-01
- SevereKmaier Infant Walkers Recalled for Serious Fall Hazard
CPSC · 2026-08-27
- Highrestor3d Recalls Veritas Standard Glenoid Baseplates Due to Machining Defect
FDA (Devices) · 2026-08-26
- SevereFord Recalls 2026 Maverick, F-150, and Bronco Sport for Joint Issues
NHTSA · 2026-08-25