Medtronic Recalls FiberNet Embolic Protection System Due to Manufacturing Defect
Medtronic is recalling specific lots of the FiberNet Embolic Protection System because a yellow polyimide tube was not removed during manufacturing.
What this means for you
Real risk of harm even if no illness or injury has been reported yet. Stop using the product and follow the agency's guidance.
Our severity reasoning: The recall is classified as FDA Class II, and the source text does not report any illnesses or injuries, fitting the criterion for risk-of-harm products where injury has not yet been reported.
Plain-English summary
Medtronic Vascular, Inc. is recalling specific lot numbers of the FIBERNET Embolic Protection System (EPS). The recall involves a manufacturing defect where the yellow polyimide tube on the device was not removed during the production process and may remain on the device.
The affected products are the FIBERNET EPS with a recommended vessel diameter of 5.0 - 6.0 mm and a maximum guidewire diameter of 0.014 in (0.36mm). The specific US model number is FBC 500600190 (lot number 1E029176) and the international model number is FBN500600190 (lot number 1E012914). A total of 50 units were distributed, with 18 in the US and 32 internationally.
The FIBERNET EPS is indicated for use as a guidewire and emboli protection system to capture and remove embolic material during percutaneous transluminal interventional procedures in carotid arteries. The distribution pattern includes the US states of IL, PA, MA, VA, RI, and LA, as well as Germany, Italy, Poland, Romania, Saudi Arabia, Kosovo, Slovakia, and Spain. Healthcare providers should stop using the affected devices and contact Medtronic for instructions on return or replacement.
The recalled product
- Product
- FIBERNET Embolic Protection System: Recommended Vessel Diameter 5.0 -6.0 mm, Maximum Guidewire Diameter: 0.014 in (0.36mm) Rx only, Sterile; Manufactured in: Invatec S.P.A., Italy; Manufacturer: Medtronic Inc. Minneapolis, MN. The FiberNet Embolic Protection System is
- Manufacturer
- Medtronic Vascular, Inc.
- Category
- Medical Device — Cardiovascular
- Hazard
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (4)
- US Model Number FBC 500600190
- lot number 1E029176
- International Model Number FBN500600190
- lot number 1E012914.
Distribution
Part of a larger recall action
This product is one of 3 recalled by Medtronic Vascular, Inc. under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 3 products in this recall →Related recalls
Same manufacturer · Medtronic Vascular, Inc.
See all →- HighMedtronic IN.PACT AV Balloon Catheter: Damaged Packaging May Affect Sterility
FDA (Devices) · 2022-05-18
- HighMedtronic IN.PACT Admiral balloon catheters recalled for damaged packaging
FDA (Devices) · 2022-05-18
- HighMedtronic Endurant Stent Graft Systems: Taper Tip Detachment Risk
FDA (Devices) · 2022-03-02
- HighMedtronic Endurant II Stent Graft Systems Recalled Due to Potential Spindle Detachment
FDA (Devices) · 2021-12-01
- HighMedtronic Endurant IIs stent graft recalled due to spindle detachment risk
FDA (Devices) · 2021-12-01
Same hazard · manufacturing defect
See all →- HighBeak & Skiff Alcohol Antiseptic Sanitizer recalled for acetaldehyde contamination
FDA (Drugs) · 2026-09-02
- HighSun Pharmaceutical Recalls Carbamazepine Tablets Due to Manufacturing Deviations
FDA (Drugs) · 2026-08-26
- HighKnee Prosthesis Trial Recall for Manufacturing Defect
FDA (Devices) · 2026-08-12
- HighU2 Total Knee System Femoral Valgus Adaptor Recall
FDA (Devices) · 2026-08-12
- HighUSTAR II Knee System Hinge Box Trial Recall
FDA (Devices) · 2026-08-12