ConMed Mini Infant Radiotranslucent Electrodes Recalled for Adhesive Conductivity Issues
ConMed is recalling 18,720 Mini Infant Radiotranslucent Electrodes because adhesive on contact wires may impede conductivity and cause failure.
What this means for you
Illness, injury, or structural failure has been reported. Stop using the product immediately and contact the manufacturer for a refund or repair.
Our severity reasoning: The agency classification is FDA Class II, and the hazard involves a potential failure of a critical medical device used for defibrillation and pacing, which aligns with the 'Severe' criteria for significant injury risk or structural defects.
Plain-English summary
ConMed Corporation is recalling 18,720 units of the Mini Infant < 3KG, Radiotranslucent Electrode, Philips Plug Style Connector (REF/Catalog Number 2602H). These non-sterile, disposable devices are indicated for use in external pacing, defibrillation, and monitoring applications for pediatric infants weighing less than 10 kg (22 lbs).
The recall was initiated because wire sets of certain devices were assembled with adhesive on the contact wires. This adhesive may impede conductivity and could cause failure of the device. The affected lot numbers are Y01221601, Y03241702, Y10121501, Y020713-17, Y04071501, and Y12021501.
The products were distributed worldwide, including the United States (nationwide), New Zealand, Saudi Arabia, Switzerland, the United Arab Emirates, Uruguay, and the Republic of Macedonia. Healthcare facilities and consumers should stop using these specific electrodes and contact ConMed Corporation for instructions on return or replacement.
The recalled product
- Product
- MINI INFANT < 3KG, RADIOTRANSLUCENT ELECTRODE, Philips Plug Style Connector, REF/Catalog Number 2602H Indicated for use in external pacing, defibrillation and monitoring applications as a non-sterile, disposable device for single pediatric use, only. The PadPro 2602 electrode
- Manufacturer
- ConMed Corporation
- Affected units
- 18,720
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (6)
- Lot Numbers: Y01221601
- Y03241702
- Y10121501
- Y020713-17
- Y04071501
- & Y12021501.
Distribution
Distributed nationwide across the United States.
Part of a larger recall action
This product is one of 5 recalled by ConMed Corporation under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 5 products in this recall →Related recalls
Same manufacturer · ConMed Corporation
See all →- ModerateConMed Suture Anchor Recalled for Incorrect Patient Implant Card
FDA (Devices) · 2026-09-02
- HighConMed AirSeal 8mm 100mm optical obturator ports may trigger overpressure alerts
FDA (Devices) · 2026-06-24
- HighConMed AirSeal 12mm bladeless optical obturators may trigger overpressure alerts
FDA (Devices) · 2026-06-24
- HighConMed AirSeal 5mm 100mm optical obturator ports may trigger overpressure alerts
FDA (Devices) · 2026-06-24
- HighConMed AirSeal 12mm blunt tip 100mm ports may trigger overpressure alerts
FDA (Devices) · 2026-06-24
Same hazard · electrical failure
See all →- HighHalcore Recalls 2025-2026 Horton Ambulances Due to Touchscreen Failure
NHTSA · 2026-08-14
- HighMarion Recalls 2025 Pumper Fire Engines Due to Display Unit Failure
NHTSA · 2026-08-10
- HighRosenbauer Recalls Emergency Vehicles with Faulty Display Units
NHTSA · 2026-08-03
- SevereBMW S 1000 RR Motorcycles Recalled Due to Potential Engine Stall Risk
NHTSA · 2026-07-23
- High