FDA (Devices) recall action 95045

Datex-Ohmeda, Inc. recalled 11 products on 2024-10-30

The FDA (Devices) publishes a recall like this one as 11 separate product records. They share a firm, a date and a cause; this page is all of them in one place, so the scale of the action is visible rather than spread across 11 pages.

Products: 11
Announced: 2024-10-30
Critical: 0
Units: 85,726

Why these products were recalled

Potential issue that may arise if the limb of a patient breathing circuit is mistakenly connected to the Auxiliary Common Gas Outlet (ACGO) port.

The agency’s own wording, quoted from the enforcement report.

The unit total adds up the quantities the agency stated for each product. Where a product record gave no figure, or gave a weight rather than a count, it contributes nothing — so the real total is at least this, never less.

1–11 of 11

HighFDA (Devices)··2024-10-30
Datex-Ohmeda Auxiliary Common Gas Outlet Conversion Kits Recalled
Datex-Ohmeda is recalling 649 Auxiliary Common Gas Outlet (ACGO) conversion kits due to a potential issue if a patient breathing circuit limb is mistakenly connected to the ACGO port.
Product
Auxiliary Common Gas Outlet (ACGO) conversion/install kits sold under product names CONV KIT SCGO TO ACGO and ACGO ASSY FIELD INSTL. These kits are not affected specifically, however are included due to being purchased with or later used to convert to ACGO.
Category
Distribution
0 states
HighFDA (Devices)··2024-10-30
Datex-Ohmeda Aespire View Anesthesia Machines Recalled for Connection Error Risk
Datex-Ohmeda is recalling 10,338 Aespire View anesthesia machines due to a potential issue where a patient breathing circuit limb may be mistakenly connected to the Auxiliary Common Gas Outlet port.
Product
Aespire View. This anesthesia gas machine is intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Anesthesia Gas Machine Recall: Breathing Circuit Misconnection Risk
Datex-Ohmeda is recalling Avance anesthesia gas machines worldwide due to a potential hazard if a patient's breathing circuit is incorrectly connected to the Auxiliary Common Gas Outlet port during setup.
Product
Avance. This anesthesia gas machine is intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Aisys CS2 Anesthesia Machine Recall: Breathing Circuit Misconnection Risk
Datex-Ohmeda is recalling approximately 15,739 Aisys CS2 anesthesia machines worldwide. A breathing circuit limb may be mistakenly connected to the Auxiliary Common Gas Outlet (ACGO) port instead of the intended connection point.
Product
Aisys CS2. This anesthesia gas machine is intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Aespire 7900 Anesthesia Gas Machine Recalled Over Breathing Circuit Misconnection Risk
Datex-Ohmeda has recalled 12,036 Aespire 7900 anesthesia gas machines worldwide due to potential risk of patient breathing circuit being mistakenly connected to the Auxiliary Common Gas Outlet port.
Product
Aespire 7900. This anesthesia gas machine is intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Aespire 7100 Anesthesia Machines Recalled for Breathing Circuit Misconnection
Datex-Ohmeda is recalling 20,097 Aespire 7100 series anesthesia machines because a patient breathing circuit can be mistakenly connected to the wrong outlet (ACGO port) instead of the intended connection point.
Product
Aespire 7100, 7100 (Variant), and Aespire 7100 S/5 Protiva configurations. These anesthesia gas machines are intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the adminis
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Anesthesia Machine Recall Due to Patient Breathing Circuit Misconnection Risk
Datex-Ohmeda Aisys anesthesia machines may allow patient breathing circuits to be incorrectly connected to the Auxiliary Common Gas Outlet, potentially affecting ventilation during anesthesia. Approximately 4,790 units worldwide are affected.
Product
Aisys. This anesthesia gas machine is intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Aisys CS2 Anesthesia Machine Breathing Circuit Misconnection Hazard
Datex-Ohmeda's Aisys CS2 anesthesia machine may pose a risk if a patient breathing circuit limb is mistakenly connected to the Auxiliary Common Gas Outlet port. Ninety-two units worldwide are affected in this FDA Class I recall.
Product
Aisys CS2 with Et Control. This anesthesia gas machine is intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states
HighFDA (Devices)··2024-10-30
Amingo Anesthesia System: Risk of Breathing Circuit Misconnection to Auxiliary Outlet
Datex-Ohmeda Amingo anesthesia systems may allow a patient breathing circuit to be mistakenly connected to the Auxiliary Common Gas Outlet (ACGO) instead of the proper outlet. The potential misconnection affects all 77 units worldwide.
Product
Amingo. OUS only.
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Anesthesia gas machines pose risk of breathing circuit misconnection
Avance CS2 and Avance CS2 Pro anesthesia machines may permit breathing circuit misconnection to the wrong gas outlet. Affected devices have the AGCO option and are distributed worldwide.
Product
Avance CS2 and Avance CS2 Pro. These anesthesia gas machines are intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states
SevereFDA (Devices)··2024-10-30
Aespire 100 anesthesia machine breathing circuit misconnection FDA recall
Datex-Ohmeda Aespire 100 anesthesia machines are recalled due to potential misconnection of breathing circuit limbs to the Auxiliary Common Gas Outlet port, which could impair anesthesia or ventilation delivery.
Product
Aespire 100. This anesthesia gas machine is intended to provide general inhalation anesthesia and ventilatory support to patients and are to be used only by medical professionals trained and qualified in the administration of general anesthesia.
Category
Distribution
0 states