FDA (Devices) recall action 93506
The FDA (Devices) publishes a recall like this one as 9 separate product records. They share a firm, a date and a cause; this page is all of them in one place, so the scale of the action is visible rather than spread across 9 pages.
There is a manufacturing defect affecting specific rotator lots. Within this population, the inner diameter of the devices O-ring may be oversized affecting seal integrity. An inadequate seal may lead to a leak during infusion of medication which may potentially lead to under infusion of medication.
The agency’s own wording, quoted from the enforcement report.
The unit total adds up the quantities the agency stated for each product. Where a product record gave no figure, or gave a weight rather than a count, it contributes nothing — so the real total is at least this, never less.
Smiths Medical is recalling 31,685 units of pressure tubing with defective O-rings that may not seal properly during medication infusion, potentially causing medication leaks and underdosing. The defect affects specific lot numbers with worldwide distribution.
Smiths Medical is recalling Medex injection line rotating adapters due to a manufacturing defect where the O-ring inner diameter may be oversized, potentially causing medication leaks during infusion.
Smiths Medical is recalling the Medex LOGICAL CATH LAB KIT due to a manufacturing defect where the O-ring inner diameter may be oversized, affecting seal integrity and potentially leading to medication under-infusion.
Smiths Medical is recalling Medex 700PSI stopcocks with rotators due to a manufacturing defect affecting the O-ring seal. The defect may cause medication leakage and under-infusion during patient treatment.
Smiths Medical Asd Inc is recalling approximately 31,685 Stopcock Left Rotator devices due to oversized O-rings that may compromise seal integrity. The defect may cause medication leaks, potentially resulting in under-infusion during treatment.
Smiths Medical is recalling specific injection line rotating adapters due to a manufacturing defect causing oversized O-rings that may lead to inadequate seal integrity and medication under-infusion.
Smiths Medical is recalling 31,685 HIGH PRESSURE ROTATOR infusion devices with a manufacturing defect that may cause an inadequate seal. The defect could lead to medication leaks and under-infusion.
Smiths Medical is recalling High Pressure Rotators due to a manufacturing defect affecting O-ring seals. An oversized inner diameter may cause inadequate seal integrity, risking medication under-infusion.
Smiths Medical is recalling approximately 31,685 units of a braided injection line due to manufacturing defects in the O-ring seal. The defect may cause medication leaks that reduce drug delivery.