FDA (Devices) recall action 80774
The FDA (Devices) publishes a recall like this one as 6 separate product records. They share a firm, a date and a cause; this page is all of them in one place, so the scale of the action is visible rather than spread across 6 pages.
Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks¿ and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyzer may not run CEA dilutions at 50x and 100x. The Analyzer may post a Sample Integrity Error when 50x or 100x dilutions are ordered for Carcinoembryonic Antigen (CEA). Dilution factors lower tha…
The agency’s own wording, quoted from the enforcement report.
The unit total adds up the quantities the agency stated for each product. Where a product record gave no figure, or gave a weight rather than a count, it contributes nothing — so the real total is at least this, never less.
Siemens Healthcare Diagnostics is recalling Atellica Sample Handler Connect software versions 1.13 and lower due to five behavioral issues that may cause incorrect sample processing or result reporting.
Siemens Healthcare Diagnostics is recalling Atellica IM 1600 Analyzer software version 1.13 and lower due to five identified behavioral issues affecting reagent locking, barcode reading, and result reporting.
Siemens is recalling Atellica Solution software version 1.13 and lower due to five behavioral issues that may cause incorrect test results or sample handling errors.
Siemens Healthcare Diagnostics is recalling Atellica Sample Handler software versions 1.13 and lower due to five behavioral issues that may cause incorrect sample processing or result reporting.
Siemens Healthcare Diagnostics is recalling Atellica Sample Handler Prime software versions 1.13 and lower due to five identified behavioral issues affecting diagnostic testing.
Siemens Healthcare Diagnostics is recalling Atellica IM 1300 Analyzers with software version 1.13 and lower due to five identified behavioral issues affecting reagent locks, barcode reading, and result reporting.