State
72,933 recalls have nationwide distribution and so reach Washington. 8,456 additional recalls listed Washington specifically in their distribution scope.
Of the 8,456 recalls naming Washington we have scored against our rubric, 867 (10%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 2,006 (24%) are Severe.
Which agencies issued them
These figures cover only the 8,456 recalls whose distribution notice names Washington specifically. The 72,933 nationwide recalls listed below reach every state, so counting them here would make every state page show the same numbers.
Depuy Synthes is recalling 3 units of the ATTUNE Revision Hinge Femoral (Right, Size 5, Cemented) knee implant due to external sterile packaging adhered to internal sterile packaging, potentially compromising product sterility.
DePuy Synthes is recalling 3 units of the ATTUNE REVISION HINGE FEMORAL RT SZ 4 CEM due to external sterile packaging found adhered to internal packaging, potentially compromising sterility.
Medline Industries is recalling specific lots of medical convenience kits containing Webcol Large Alcohol Prep Pads because the pads were found to be non-sterile due to contamination with Paenibacillus phoenicis bacteria discovered during a sterilization audit.
Abbott Point Of Care Inc. is recalling approximately 7.6% of i-STAT G3+, i-STAT EG6+, and i-STAT EG7+ blood gas cartridges due to a manufacturing issue causing falsely high PCO2 and low pH readings, which may lead to unnecessary or harmful clinical interventions.
Philips is recalling certain Ingenia Ambition S MRI systems with MR Elastography software due to potential stiffness value errors that may occur when specific image reconstruction parameters are used in combination with Resoundant's algorithm.
Philips is recalling Achieva 1.5T MRI systems with MR Elastography software due to potential stiffness value errors that may occur with specific image reconstruction parameters, causing incorrect voxel size display in the default scan protocol.
Siemens Healthcare Diagnostics is recalling epoc BGEM BUN Test Cards due to risk of inaccurate pH and carbon dioxide readings that could lead to inappropriate or missed treatment of acid-base disorders.
Elekta, Inc. is recalling the Leksell Vantage Arc System because locking mechanisms may fail to properly secure to the Arc system, which could cause coordinate shifting during medical procedures.
Medline Industries is recalling multiple IV start and securement kits nationwide because they contain non-sterile Webcol Large Alcohol Prep Pads due to discovery of a bacterial contaminant during sterilization testing.
DePuy Synthes is recalling ATTUNE Revision Hinge Femoral knee implants because external sterile packaging was found adhered to internal packaging, potentially compromising sterility.
Medline Industries is recalling Centurion medical convenience kits containing Webcol Large Alcohol Prep Pads due to discovery of non-sterile product contaminated with Paenibacillus phoenicis bacteria during sterilization testing.
Medline Industries is recalling Centurion medical convenience kits containing Webcol Large Alcohol Prep Pads after Cardinal Health determined the pads are non-sterile due to bacterial contamination discovered during sterilization testing.
Hologic is correcting Genius Review Station displays (model CMP-01669) that were modified by users outside the FDA-cleared configuration. The devices need restoration to validated settings per the manufacturer's Operator's Manual.
Philips Ingenia 3.0T MRI systems with MR Elastography software may display incorrect stiffness values and voxel size settings when specific image reconstruction parameters are used, potentially affecting diagnostic accuracy.
Philips is recalling the Ingenia 1.5T CX MRI machine with MR Elastography because certain image reconstruction parameters may cause stiffness value measurement errors in the default scan protocol.
Philips is recalling specific units of SmartPath to dStream for XR and 3.0T with MR Elastography due to potential stiffness value errors when certain image reconstruction parameters are used with Resoundant's algorithm, which may cause voxel size settings in the default MRE scan protocol to display incorrectly.
Becton Dickinson & Co. is recalling certain lots of BD GasPak EZ Campy Gas Generating Pouch Systems because gas generating sachets may produce carbon dioxide levels below specification, potentially affecting microbiologic laboratory testing.
DePuy Synthes is recalling 3 units of ATTUNE Revision Hinge Femoral RT SZ 8 CEM implants due to external sterile packaging adhered to internal sterile packaging, potentially compromising sterility.
DePuy Synthes is recalling 3 units of ATTUNE Revision Hinge Femoral Left Size 4 Cement prosthetic components because external sterile packaging was found adhered to internal packaging, potentially compromising sterility.
Philips is recalling certain SmartPath to dStream 1.5T MR Elastography systems due to potential stiffness value errors when specific image reconstruction parameters are used, which may cause incorrect voxel size settings in the default MRE scan protocol.
Philips Ingenia 1.5T MRI systems with MR Elastography may display incorrect stiffness values and voxel size settings due to image reconstruction parameter combinations. The error affects 54 units distributed worldwide.
Becton Dickinson is recalling certain lots of BD GasPak EZ CO2 and BD GasPak EZ Campy Gas Generating Pouch Systems because gas generating sachets may produce carbon dioxide levels below specification.
Zimmer, Inc. is recalling Disposable Mixing Bowls with Spatula (Model 00-5049-011-00) due to package seal defects that may compromise the sterile barrier. Ten complaints have been received identifying incomplete seals, wrinkles, or peeling seals.
Philips Ingenia Ambition X MRI systems with MR Elastography may produce incorrect stiffness values due to image reconstruction parameter errors, affecting diagnostic accuracy.
Philips is recalling the Achieva 3.0T with MR Elastography system due to potential stiffness value errors in image reconstruction when specific parameters are used, which may cause incorrect voxel size display in the default scan protocol.