The Recall Desk

State

Rhode Island product recalls

20,199 recalls have nationwide distribution and so reach Rhode Island. 0 additional recalls listed Rhode Island specifically in their distribution scope.

About recalls in Rhode Island

Most US product recalls have nationwide distribution — the manufacturer ships into every state and the recall sweeps the same way. We include those in this listing because they affect Rhode Island consumers even though the source notice doesn’t name the state. State-specific recalls are usually for products with regional distribution (a regional dairy, a local store brand) or where the agency was able to narrow the affected shipments to specific destinations.

If you’re checking whether a recall affects your purchase, the recall detail page lists the exact production lot codes, UPCs, and best-by dates. Match those against your package — distribution scope is a starting filter, not the final answer.

10326–10350 of 20199

  • HighFDA (Devices)·Z-0879-2024·2024-02-07

    Knee Replacement Insert Recalled Due to Potential Material Oxidation

    Howmedica Osteonics recalls SCORPIO TS TIB INSERT knee replacement components manufactured with UHMWPE raw material over 5 years old, which may experience elevated oxidation affecting material properties. No injuries or illnesses have been reported.

    Product
    SCORPIO TS TIB INSERT -Intended for knee replacment Part Number: 72-4-7516
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0947-2024·2024-02-07

    Philips Achieva 1.5T MRI system recalled for defective coil seal

    Philips is recalling the Achieva 1.5T Initial MRI system due to a defective Quadrature Body Coil seal. The adhesive may fail and create sharp edges that could cut or abrade patients during scanning.

    Product
    Achieva 1.5T Initial system. Model (REF) Numbers 781178.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0860-2024·2024-02-07

    Philips Azurion 7 M20 FlexArm system recalled for software connectivity loss

    Philips Medical Systems recalls the Azurion 7 M20 FlexArm system due to a software issue causing loss of connectivity between the FlexArm and Maquet Magnus Table. The recall affects 28 systems worldwide.

    Product
    Azurion 7 M20 FlexArm system (Software version R2.x) with Maquet Magnus Table (Software version 05.02.12)
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0880-2024·2024-02-07

    Knee Replacement Implant Recalled for Potential Material Degradation Risk

    Howmedica Osteonics Corp. is recalling SCORPIO TS TIB knee replacement implants manufactured with aged raw material that may develop oxidation, potentially affecting performance.

    Product
    SCORPIO TS TIB INSERT. Intended for knee replacement Part Number: 72-4-7518
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0876-2024·2024-02-07

    Knee Implant Inserts Recalled Due to Potential Material Degradation

    Howmedica Osteonics is recalling SCORPIO TS TIB knee implant inserts (Part Number 72-4-0510) manufactured with UHMWPE material over 5 years old. The material may have elevated oxidation levels that could affect implant performance.

    Product
    SCORPIO TS TIB INSERT -Intended for knee replacement Part Number: 72-4-0510
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0887-2024·2024-02-07

    Knee Replacement Implant Recalled Due to Potential Material Degradation

    Knee replacement components recalled due to potential oxidation in UHMWPE material that could affect durability. Approximately 76 units distributed in the US with additional international distribution.

    Product
    SCORPIO TOTAL KNEE MEDIALIZED DOME PATELLA-SZ #5 -Intended for knee replacement Part Number: 73-0510
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0900-2024·2024-02-07

    Scorpio NRG Tibial Bearing Insert Assembly Recall Due to Material Oxidation Risk

    Howmedica Osteonics Corp. is recalling Scorpio NRG Tibial Bearing Insert Assemblies manufactured with raw material over 5 years old, which may develop elevated oxidation affecting implant durability.

    Product
    Scorpio NRG Tibial Brg Insert Assy -Intended for knee replacement Part Number: 82-2-0910
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0871-2024·2024-02-07

    Knee Replacement Implant Recalled Due to Potential Material Degradation

    Howmedica Osteonics is recalling SCORPIO RECESSED PATELLA knee replacement implants manufactured with UHMWPE material over 5 years old. The aged material may develop elevated oxidation levels that could affect the implant's performance.

    Product
    SCORPIO RECESSED PATELLA- Intended for knee replacement Part Number: 3044-0030
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0907-2024·2024-02-07

    Knee replacement inserts recalled for potential material oxidation

    Howmedica Osteonics Corp. is recalling LEFT LARGE-PCA knee replacement inserts manufactured with raw material over 5 years old due to potential elevated oxidation levels that could affect material properties.

    Product
    LEFT LARGE-PCA MOD.REV.DUR.REV.INSERT Intended for knee replacement Part Number: 6637-0-228
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0922-2024·2024-02-07

    Knee replacement implant recalled for potential material oxidation risk

    Howmedica Osteonics is recalling the DUR PCA MTK REV INS RT knee replacement implant manufactured with UHMWPE material over 5 years old. The material can develop elevated oxidation levels that may degrade its properties.

    Product
    DUR PCA MTK REV INS RT Intended for knee replacement Product Number: 6728-2-711
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0896-2024·2024-02-07

    SCORPIO U-DOME PATELLA Knee Implants Affected by Material Oxidation Risk

    Certain SCORPIO U-DOME PATELLA knee replacement devices may experience material degradation due to aged raw material. The manufacturer is recalling affected units because material oxidation could compromise device durability and performance.

    Product
    SCORPIO U-DOME PATELLA -Intended for knee replacement Part Number: 73-3708
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0875-2024·2024-02-07

    Knee replacement implant recalled for potential material oxidation

    Howmedica Osteonics recalls SCORPIO TS TIB knee replacement inserts (lot TA21X9) manufactured from UHMWPE material over 5 years old due to potential elevated oxidation that could affect material properties. No injuries reported.

    Product
    SCORPIO TS TIB INSERT -Intended for knee replacement Part Number: 72-4-0321
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0904-2024·2024-02-07

    Knee Replacement Component Recalled for Potential Material Degradation

    Howmedica Osteonics Corp. is recalling P7 28MM 10 DEGREE +4MM INSERT knee replacement components (Lot 61311701, 62122001) due to potential oxidation in aged UHMWPE material that could affect material properties.

    Product
    P7 28MM 10 DEGREE +4MM INSERT Intended for knee replacement Part Number: 6302-6-107
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0915-2024·2024-02-07

    Knee Replacement Implant Recall Due to Potential Material Oxidation

    Howmedica Osteonics Corp. is recalling LARGE PRIMARY REV.TIB.INSERT-DURACON knee implants manufactured with aged UHMWPE material that may have elevated oxidation levels. Affected patients should consult their healthcare provider.

    Product
    LARGE PRIMARY REV.TIB.INSERT- DURACON Intended for knee replacement Product Number: 6637-4-231
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0928-2024·2024-02-07

    Tank hose assembly recalled for incorrect material and missing perforations

    AtriCure recalls tank hose assemblies due to manufacturing defects. Certain lots have outer sheaths missing required pin perforations and inner tubes made of incorrect material.

    Product
    Packaged, Tank Hose Assembly CMA-US, Product Catalog Number A001056
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0821-2024·2024-02-07

    Gastroenterological and Urological Procedure Kits Recalled for Sterilization Process Failures

    American Contract Systems is recalling AHN BIOPSY STERILE procedure kits nationwide because several components were improperly sterilized, potentially compromising device functionality and drug efficacy.

    Product
    Custom procedural convenience kits and trays, gastroenterological & urological, labeled as: AHN BIOPSY STERILE, kit number AHBP12A
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0826-2024·2024-02-07

    Custom Procedural Convenience Kits Recalled for Sterilization Validation Failure

    American Contract Systems is recalling 244 custom procedural kits (Baby PICC, Pediatric PICC, and PORT PACK) distributed nationwide. Components subjected to sterilization without proper validation documentation may have reduced functionality or elevated sterilization residuals.

    Product
    Custom procedural convenience kits and trays, general hospital use, labeled as: a) Baby PICC Kit, kit number UIBP90J; b) Baby PICC Kit, kit number UIBP90K; c) PORT PACK (PS 058330), kit number UIPO82AB; d) Pediatric PICC Kit, kit number UIPP76K;
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0937-2024·2024-02-07

    EZDilate Fixed Wire Balloon Recalled for Device Failure and Foreign Body Risk

    Olympus recalls approximately 5,031 EZDilate Fixed Wire Balloons due to device bursting, leaking, and foreign body incidents during esophageal dilation procedures. Patients should contact their healthcare provider if they received this device.

    Product
    EZDilate Fixed Wire Balloon 16-17-18. Indicated for endoscopic dilation of strictures of the esophagus in adults and adolescents (>12 years). Model: BD-400P-1880
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0861-2024·2024-02-07

    Azurion 7 M20 Imaging System Recalled for Loss of Arm and Table Movement

    Philips Azurion 7 M20 FlexArm systems may lose connectivity due to a date/time software issue, preventing arm and table movement. The defect affects 108 systems worldwide, including 14 in the United States.

    Product
    Azurion 7 M20 FlexArm system (Software version R2.x) with Maquet Magnus Table (Software version 05.02.12)
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0927-2024·2024-02-07

    Cryo Module Tank Hose Assemblies Recalled for Material and Design Defects

    AtriCure recalls certain tank hose assemblies for Cryo Module equipment due to manufacturing defects. The units have incorrect inner tube material and missing required perforations on the outer sheathing.

    Product
    Cryo Module Accessories Domestic CMA-OUS, Product Catalog Number A001053
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0830-2024·2024-02-07

    Surgical kits for childbirth recalled for sterilization and functionality risks

    American Contract Systems is recalling C-section surgical kits that were sterilized without proper assessment. Components may have lost function or drug efficacy, or have excess sterilization residuals.

    Product
    Custom procedural convenience kits and trays, Obstetrical & Gynecological use, labeled as: a) C-SECTION PACK, kit number FDCS01AA; b) C-SECTION PACK, kit number FDCS01AB; c) C-SECTION STERILE PACK, kit number HGCS68J; d) C-SECTION PACK, kit number HICS50H; e) C-SECTION
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0909-2024·2024-02-07

    Knee replacement implant recall due to material oxidation risk

    Howmedica Osteonics is recalling knee replacement implants manufactured with aged UHMWPE raw material that may have elevated oxidation levels, which could degrade the material's mechanical properties.

    Product
    LEFT X-LARGE-PCA MOD.REV.DUR.REV.INSERT Intended for knee replacement. Product Number: 6637-0-328
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0895-2024·2024-02-07

    FDA Recalls SCORPIO U-DOME Knee Implants for Potential Material Oxidation

    Howmedica is recalling SCORPIO U-DOME PATELLA knee replacement implants manufactured with UHMWPE material over 5 years old due to potential elevated oxidation levels that could affect material properties.

    Product
    SCORPIO U-DOME PATELLA -Intended for knee replacement Part Number: 73-3508
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0954-2024·2024-02-07

    MRI Machine Coil Seal Adhesive May Create Sharp Edges

    The Intera Achieva 1.5T Pulsar MRI machine's Quadrature Body Coil seal adhesive may fail, creating sharp edges that could injure patients. All units of this model are affected.

    Product
    Intera Achieva 1.5T Pulsar. Model (REF) Number 781171.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighNHTSA·23V487000·2024-02-07

    Mazda recalls 2014-2018 Mazda3 and CX-3 for faulty rearview cameras

    Mazda is recalling 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles because rearview cameras may display flickering or distorted images, reducing visibility and increasing crash risk. Dealers will inspect and replace cameras free of charge.

    Product
    MAZDA — 2014 MAZDA MAZDA3
    Category
    Vehicle
    Distribution
    Distributed nationwide