The Recall Desk

State

Maine product recalls

20,199 recalls have nationwide distribution and so reach Maine. 0 additional recalls listed Maine specifically in their distribution scope.

About recalls in Maine

Most US product recalls have nationwide distribution — the manufacturer ships into every state and the recall sweeps the same way. We include those in this listing because they affect Maine consumers even though the source notice doesn’t name the state. State-specific recalls are usually for products with regional distribution (a regional dairy, a local store brand) or where the agency was able to narrow the affected shipments to specific destinations.

If you’re checking whether a recall affects your purchase, the recall detail page lists the exact production lot codes, UPCs, and best-by dates. Match those against your package — distribution scope is a starting filter, not the final answer.

10401–10425 of 20199

  • HighFDA (Devices)·Z-0822-2024·2024-02-07

    Custom Surgical Procedure Kits Recalled for Improper Sterilization Assessment

    American Contract Systems is recalling 3,196 custom surgical procedure kits because sterilized components lacked documented suitability assessment. The components may have lost functionality or accumulated excessive sterilization residuals.

    Product
    Custom procedural convenience kits and trays, gastroenterological & urological, labeled as: a) LAP KIDNEY MODULE, kit number AGKD50L; b) ROBOTIC PROSTATE PACK - 264852, kit number ANPR34S; c) LAP CHOLE - 213388, kit number BFLC02AD; d) GENERAL LAPAROSCOPY PACK, kit numbe
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0920-2024·2024-02-07

    Knee replacement devices recalled due to potential material degradation

    Howmedica Osteonics Corp. recalls knee replacement devices with UHMWPE components manufactured from raw material over 5 years old due to potential oxidation that may affect material properties.

    Product
    DUR PCA MTK REV INS LFT Intended for knee replacement Product Number: 6728-2-611
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0951-2024·2024-02-07

    Philips Ingenia 3.0T CX MRI: Loose Coil Seal May Cause Sharp Edges

    Philips is recalling Ingenia 3.0T CX MRI machines due to potential failure of the Quadrature Body Coil seal adhesive. Loose seals may create sharp edges that risk skin injury or hair entanglement during scanning.

    Product
    Ingenia 3.0T CX. Model (REF) Numbers 781271, 782105.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0819-2024·2024-02-07

    Cardiac central line insertion kits lack documented sterilization validation

    American Contract Systems is recalling 290 cardiac procedural kits nationwide because components were subjected to sterilization without documented assessment of temperature suitability, potentially causing loss of functionality or efficacy.

    Product
    Custom procedural convenience kits and trays, cardiac, labeled as: a) CENTRAL LINE INSERTION PACK, kit number LLCE52; b) Adult Central Line Insertion Supply Kit, kit number UICL44N; c) Pediatric Central Line Insertion, kit number UIPL77K
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0912-2024·2024-02-07

    Knee Replacement Implant Recalled Due to Potential Material Oxidation Risk

    Howmedica Osteonics Corp. is recalling certain knee replacement implants made with UHMWPE material over 5 years old that may have oxidized, potentially affecting implant performance.

    Product
    RGT.LARGE-PCA MOD.REV.- DUR.REV.INSERT Intended for knee replacement Product Number: 6637-0-928
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0881-2024·2024-02-07

    SCORPIO TS Knee Implant Recall Due to Material Oxidation Risk

    Howmedica is recalling SCORPIO TS knee implants made with raw material over 5 years old due to potential oxidation that could degrade the device's mechanical properties.

    Product
    SCORPIO TS TIB INSERT -Intended for knee replacement Part Number: 72-4-7521
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0867-2024·2024-02-07

    Aesculap Needle Holders Distributed With Incorrect Product Labels and Packaging

    Aesculap Inc. is recalling needle holder models that were distributed with incorrect product labels. The MB215R was labeled as MB362R and vice versa, which may cause procedural delays.

    Product
    MB215R - MILLS DUROGRIP TC Micro Needle Holder, straight, 8:, (203 mm), "TC MILLS NDLE HOLDRRND HNDLSTR203MM"
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0926-2024·2024-02-07

    Tibial Knee Replacement Implants Recalled Due to Material Oxidation

    Howmedica Osteonics is recalling tibial bearing inserts used in knee replacements manufactured from UHMWPE raw material over 5 years old. The material may develop elevated oxidation levels that could impact its structural properties.

    Product
    TIBIAL BEARING INSERT SERIES P-S I ASSY Intended for knee replacement Product Number: 7291-0324
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0925-2024·2024-02-07

    PS Lipped Tibial Insert Assy Duracon Knee Implant Oxidation Risk

    Howmedica Osteonics is recalling PS Lipped Tibial Insert knee replacement components manufactured with aged UHMWPE material that may develop oxidation, potentially affecting device properties and performance.

    Product
    PS LIPPED TIBIAL INSERT ASSY DURACON Intended for knee replacement Product Number: 6742-1-416
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0902-2024·2024-02-07

    Knee Replacement Component Recalled for Potential Material Oxidation and Degradation

    Howmedica Osteonics is recalling TRIDENT 0 deg knee implant components manufactured with aged raw material that may have elevated oxidation levels, potentially affecting material properties.

    Product
    HOWMEDICA OSTEONICS TRIDENT 0 deg POLY INSERT Intended for knee replacement Part Number: 620-00-32J
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0845-2024·2024-02-07

    Surgical sutures recalled due to substandard gamma sterilization doses

    Covidien is recalling multiple surgical suture products because certain lots were sterilized with gamma doses exceeding approved levels. The excess radiation may reduce suture strength over time, potentially causing wound failure and bleeding.

    Product
    Sofsilk Braided Silk sutures: CS-211 SOFSILK* 4-0 BLK 45CM CVF21 X36 GS-831 SOFSILK* 4-0 BLK 75CM V20 X36 S-176 SOFSILK* 0 BLK 12X45CM PCT X24 S-182 SOFSILK* 5-0 BLK 12X45CM PCT X36 S-184 SOFSILK* 3-0 BLK 12X45CM PCT X36 S-185 SOFSILK* 2-0 BLK 12X45CM PCT X36 S-245 SOFSILK* 2-0
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0943-2024·2024-02-07

    Olympus EZDilate Balloon Dilators Recalled for Device Malfunction and Retained Foreign Bodies

    Olympus recalled EZDilate Wire Guided Balloon endoscopic dilators due to reports of bursting, leaking, and retained foreign bodies during patient procedures. The Class II recall affects 4,182 units used to treat esophageal strictures.

    Product
    EZDilate Wire Guided Balloon 16-17-18. Indicated for endoscopic dilation of strictures in the alimentary tract in adults and adolescents (>12 years). Model: BD-410X-1855
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0924-2024·2024-02-07

    Knee Replacement Insert May Degrade from Oxidized Raw Material

    Howmedica Osteonics is recalling PS LIPPED TIBIAL INSERT ASSY DURACON knee replacement inserts manufactured with UHMWPE raw material over 5 years old. The aged material may develop elevated oxidation that could impact material properties.

    Product
    PS LIPPED TIBIAL INSERT ASSY DURACON Intended for knee replacement Product Number: 6742-1-413
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0965-2024·2024-02-07

    Medline Blood Culture Collection Kit Recalled for Expired Bactec Component

    Medline Industries recalls specific lots of blood culture collection kits because the Bactec component expiration date was not documented on the kit insert. Users who fail to check the component's expiration date inside the kit risk using an expired diagnostic component.

    Product
    MEDLINE BLOOD CULTURE COLLECTION KIT, Reorder Number DYNDH1714A
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0955-2024·2024-02-07

    Philips MRI Coil Seal Adhesive May Fail and Create Sharp Patient Contact Surfaces

    Philips has recalled certain SmartPath to dStream MRI coil components because the seal adhesive may fail, creating sharp edges that could contact patients during scanning and cause skin and tissue injuries.

    Product
    SmartPath to dStream for 1.5T. Model (REF) Numbers 781260, 782112.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0948-2024·2024-02-07

    Philips Achieva 3.0T MRI Coil Seal Adhesive May Fail, Risking Patient Injury

    The Quadrature Body Coil seal adhesive in Philips Achieva 3.0T MRI scanners may fail, creating sharp edges that can injure patients. All units with model numbers 781277, 781177, 781278, 781344, and 781345 are affected.

    Product
    Achieva 3.0T. Model. (REF) Numbers 781277, 781177, 781278, 781344, 781345.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0882-2024·2024-02-07

    SCORPIO TS TIB INSERT Knee Replacement Components Recalled for Potential Material Degradation

    Howmedica Osteonics is recalling SCORPIO TS TIB INSERT knee replacement inserts manufactured with aging raw material. The material may develop elevated oxidation that could affect performance.

    Product
    SCORPIO TS TIB INSERT -Intended for knee replacement Part Number: 72-4-7524
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0952-2024·2024-02-07

    Philips MRI Scanner Quadrature Coil Seal Adhesive May Fail and Create Sharp Edges

    Philips Intera 1.5T Achieva Nova MRI machines (Model 781172) may develop seal adhesive failure in the Quadrature Body Coil, creating sharp edges that could injure patients during scanning.

    Product
    Intera 1.5T Achieva Nova. Model (REF) Numbers 781172.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0816-2024·2024-02-07

    Custom Anesthesia Kits Recalled Over Sterilization Validation Failure

    American Contract Systems recalls 182 anesthesia procedure kits due to improper sterilization assessment of added components. The kits may have compromised functionality, reduced drug efficacy, or elevated sterilant residue.

    Product
    Custom procedural convenience kits and trays, anesthesia, labeled as: a) HEART ANESTHESIA BUNDLE NS, Kit Number LMHA01V; b) OR/Anesthesia Central Line Insertion Kit, Kit Number UIAN43L
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0829-2024·2024-02-07

    Obstetrical Labor and Delivery Kits Recalled for Potential Functionality Loss

    American Contract Systems has recalled Labor and Delivery Packs because certain components may have lost functionality or efficacy due to unvalidated sterilization exposure.

    Product
    Custom procedural convenience kits and trays, Obstetrical & Gynecological use, labeled as: a) LABOR & DELIVERY PACK, kit number HILD52F; b) LABOR & DELIVERY PACK, kit number HILD52G
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0831-2024·2024-02-07

    Custom OB/GYN Procedural Kits Recalled for Sterilization Process Failure

    American Contract Systems recalled 144 custom OB/GYN procedural kits after discovering components were sterilized without proper documentation, potentially losing functionality or efficacy. Affected units were distributed nationwide.

    Product
    Custom procedural convenience kits and trays, Obstetrical & Gynecological use, labeled as: a) LavH, kit number BBLV21C; b) LAP HYST 247540, kit number BFHY75U
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Drugs)·D-0274-2024·2024-02-07

    Lupin Pharmaceuticals Recalls Cefixime Suspension Over Failed Specifications

    Lupin Pharmaceuticals is recalling Cefixime for Oral Suspension 100mg/5mL (4,608 bottles) due to failed impurity and degradation specifications. The product was distributed nationwide.

    Product
    CEFIXIME — CEFIXIME (CEFIXIME)
    Category
    Drug
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0820-2024·2024-02-07

    Custom Ear, Nose and Throat Surgical Kits Recalled Due to Sterilization Validation Failure

    American Contract Systems is recalling 804 custom ear, nose and throat surgical kits nationwide because components were sterilized without validation that they could tolerate the process, potentially affecting functionality or drug efficacy.

    Product
    Custom procedural convenience kits and trays, ear, nose & throat, labeled as: a) T AND A PACK AGH ASC, kit number AGTA48J; b) OPSC EAR PACK, kit number LLEO66; c) T AND A PACK, kit number MMTA41F
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0956-2024·2024-02-07

    Philips MRI coil seal adhesive may fail, creating sharp edges and injury risk

    A Philips MRI coil component's adhesive may fail and create sharp edges that could injure patients during scanning. The defect affects 286 units worldwide.

    Product
    SmartPath to dStream for XR and 3.0T. Model (REF) Numbers 781270, 782113, 782129.
    Category
    Medical Device
    Distribution
    Distributed nationwide