The Recall Desk

Recalls

All US Product Recalls

Searchable archive of product recalls from the FDA, USDA FSIS, CPSC, NHTSA, and EPA — translated into plain English, severity-scored from objective criteria, and always linked back to the original government notice.

How to read this listing

Every recall on this list has been scored 1–5 against an objective rubric from the agency’s own classification, presence of reported injuries or deaths, distribution scope, and hazard type. The colored severity badge on each card is the score — 5 (Critical) means deaths or serious injuries are reported, 4 (Severe) means significant injury or hospitalization risk, and 3 (High) means a known hazard with no confirmed harm yet. Filter to 3+ (High and above) if you want to skip routine Class-III notices.

The agency chips above control which streams are visible. FDA spans food, drugs, and medical devices. USDA FSIS is meat, poultry, and processed egg products. CPSC is household consumer products. NHTSA is vehicles, tires, and child seats. Nationwide on a card means the recall affects every US state — most do — while a state list means distribution was limited.

Click any recall to see the full summary, affected lot codes and model numbers, the agency’s own classification, and a direct link back to the original government notice for verification.

Filters

Agency

Category

Minimum severity

Clear filters

4476–4500 of 27375

  • HighFDA (Devices)·Z-2987-2024·2024-09-18

    Medline Convenience Kits Recalled for Syringe Leaks and Breakage

    Medline is recalling medical convenience kits containing defective plastic syringes that may leak or break. The kits are used for epidural and spinal anesthesia procedures and have been distributed worldwide.

    Product
    Medline Convenience kits, labeled as: 1) SINGLE SHOT EPIDURAL PACK-LF, Pack Number DYNJ0708470K ; 2) EPIDURAL CSTM PACK-LF , Pack Number DYNJ0844004; 3) CUSTOM EPIDURAL PACK-LF , Pack Number DYNJ0934752F ; 4) EPIDURAL PACK-LF, Pack Number DYNJ0957053D ; 5) EPIDURAL PACK-LF,
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-3043-2024·2024-09-18

    Medline Medical Convenience Kits Recalled for Syringe Leaks and Breakage

    Medline Convenience kits containing plastic syringes are being recalled due to leaks, breakage, and quality issues that may pose risks to patient health. The recall affects kits with Pack Number DYNDH1453 distributed worldwide.

    Product
    Medline Convenience kits labeled as: HSG TRAY, Pack Number DYNDH1453
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-3127-2024·2024-09-18

    Proton Therapy System May Display Insufficient Images During Treatment Planning

    FDA recalls the PROBEAT-V proton beam therapy system due to a software issue where the 3D image positioning mode may display insufficient images, potentially affecting treatment planning accuracy.

    Product
    Brand Name: PROBEAT Product Name: PROBEAT-V Model/Catalog Number: N/A Software Version: N/A Product Description: The PROBEAT-V is a proton beam irradiation system, which provides a therapeutic proton beam for clinical treatment. It is designed to deliver a proton beam with
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3133-2024·2024-09-18

    Biolox Taper Sleeve Mislabeling: Wrong Component Size in Hip Replacement

    Zimmer GmbH is recalling Biolox Option Taper Sleeves due to mislabeling where packaging labels one neck size but contains the opposite size. These components are used in hip replacement surgery.

    Product
    Biolox Option Taper Sleeve, Type 1 Taper, -6mm Neck - Indicated for use in total hip replacement with cemented or non-cemented femoral and acetabular components. Item Number: 650-1064
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3069-2024·2024-09-18

    Sterile Surgical Kit Contains Non-Sterile Component Without Label

    A non-sterile Mastisol component was included in certain sterile craniotomy packs without proper labeling. If users assume the component is sterile, it could increase infection risk during surgery.

    Product
    CRANIOTOMY PACK, Pack Number DYNJ46552O
    Category
    Medical Device
    Distribution
    3 states
  • HighFDA (Devices)·Z-2975-2024·2024-09-18

    HeNe Laser System Allows Key Removal While Operating

    Pacific LaserTech's 25-LHP-828 HeNe laser systems allow the key to be removed while operating, violating federal safety requirements. Four units distributed nationwide lack proper controls to prevent unintended laser operation.

    Product
    25-LHP-828, HeNe Laser System, 35 mW
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3089-2024·2024-09-18

    Proton Therapy System Software Allows Safety Verification Mechanisms to Be Disabled

    The IBA Proton Therapy System (PROTEUS 235 and related models) has a software defect allowing safety parameter verification mechanisms to be deactivated during clinical use. This affects 35 units distributed worldwide.

    Product
    IBA Proton Therapy System - PROTEUS 235 ProteusPLUS and ProteusONE Software versions: PTS-8 versions, PTS-10 versions, PTS-11 versions, and PTS-12 versions
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3122-2024·2024-09-18

    FilmArray 2.0 Diagnostic Instruments Recalled for Calibration Error Affecting Test Results

    BioFire Diagnostics is recalling FilmArray 2.0 diagnostic instruments that may have been incorrectly calibrated, leading to false positive and false negative results for infectious disease tests including Salmonella, Giardia, Norovirus, and MRSA.

    Product
    FILMARRAY 2.0 INSTRUMENT, REF: FLM2-ASY-0001, FLM2-ASY-0001-W
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3008-2024·2024-09-18

    Medline Esophagectomy Convenience Kits Recalled for Syringe Leaks and Breakage

    Medline Industries recalls esophagectomy convenience kits containing plastic syringes with leaks and breakage issues. The defects may pose a risk to patient health during surgical procedures.

    Product
    Medline Convenience kits labeled as: PUH ESOPHAGECTOMY CDS, Pack Number CDS984309I
    Category
    Medical Device
    Distribution
    0 states
  • CriticalFDA (Devices)·Z-2943-2024·2024-09-11

    Trilogy Evo Ventilator Software Update for Identified Safety Issues

    Philips Respironics is issuing a mandatory software update (Version 1.05.10.00) for the Trilogy Evo Universal Ventilator to address safety issues identified in earlier recalls. Affected units should implement the update.

    Product
    Trilogy Evo Universal Ventilator, Model No. DS2000X11B
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-2942-2024·2024-09-11

    Trilogy Evo EV300 Ventilator Mandatory Software Update for Safety Issues

    Philips Respironics is issuing a mandatory software update (Version 1.05.10.00) for Trilogy Evo EV300 ventilators to resolve previously identified safety issues. Approximately 90,910 US units and 56,273 international units are affected.

    Product
    Trilogy Evo EV300 -- Model Number/ Model Description: BL2200X15B Trilogy Evo, O2, Benelux EV300; BR2200X18B Trilogy Evo, O2, Brazil EV300; CA2200X12B Trilogy Evo, O2, Canada EV300; DE2200X13B Trilogy Evo, O2, Germany EV300; DS2200X11B Trilogy Evo, O2, USA EV300; DS2200X11B
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-2944-2024·2024-09-11

    Philips Respironics Trilogy Evo Ventilator Software Update Addresses Safety Issues

    Philips Respironics is issuing a mandatory software update (Version 1.05.10.00) for Trilogy Evo ventilators worldwide to resolve identified safety issues. Users must apply the update and review the updated User Manual.

    Product
    Trilogy Evo; Model No./Model Description -- AU2110X15B Trilogy Evo, Australia BL2110X15B Trilogy Evo, Benelux BR2110X18B Trilogy Evo, Brazil CA2110X12B Trilogy Evo, Canada DE2100X13B Trilogy Evo O2, Germany DE2110X13B Trilogy Evo, Germany DS2100X11B Trilogy Evo, O2, US
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-2690-2024·2024-09-11

    Vivo 45 LS Ventilator Recall: Potential Formaldehyde Emission Risk

    Breas Medical is recalling the Vivo 45 LS ventilator due to potential elevated formaldehyde emissions into the patient breathing airpath under specific conditions.

    Product
    Vivo 45 LS, pressure and volume ventilator capable of delivering continuous or intermittent ventilatory support for patients who require invasive or non-invasive mechanical ventilation, Model/Catalog Number: 230000 (230016, 230216)
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-2721-2024·2024-09-11

    Fresenius Kabi IV Administration Sets Recalled for Uncontrolled Medication Flow Risk

    Fresenius Kabi is recalling LVP Primary Administration Sets due to a defect that may cause uncontrolled medication flow and potential overdose. The recall affects 4,500 pieces distributed in Colorado, Idaho, New Jersey, and Utah.

    Product
    LVP Primary Administration Set, Dual-Inlet, Low-Sorbing, Needle-Free Port, Y-Site (Qty 25), Product Code: SET-0013-25. for intravenous infusion.
    Category
    Medical Device
    Distribution
    4 states
  • HighFDA (Devices)·Z-2980-2024·2024-09-11

    Beckman Power Express Centrifuge Sample Holder May Detach During Operation

    An adhesive joint failure in the PE Centrifuge Temperature Controlled component can cause the metal part to detach inside the centrifuge, risking sample destruction and potential exposure of laboratory technicians to biohazardous material.

    Product
    PE Centrifuge Temperature Controlled, REF: B36366, a component of the Power Express.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2979-2024·2024-09-11

    Power Express PE Centrifuge adhesive joint failure may cause component detachment

    The adhesive joint in this medical device component can fail, causing the metal part to detach. This may damage the centrifuge, destroy patient samples, and potentially expose lab staff to biohazardous material.

    Product
    PE Centrifuge, REF: B36365, a component of the Power Express
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2948-2024·2024-09-11

    BD Pyxis QFill Medication Cabinet Software Bug Causes Incorrect Restock Labels

    The BD Pyxis QFill Replenishment Station medication cabinet has a software issue that may print incorrect bin information on restock labels for medications stored in non-CUBIE locations.

    Product
    BKIT BD Pyxis QFill Replenishment Station, REF: 155197-01, medication cabinet system
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2978-2024·2024-09-11

    Medical Device Sample Holder Recalled for Adhesive Joint Failure

    Beckman Coulter Power Express sample holders can fail at the adhesive joint between plastic socket and metal component. This may cause the metal part to detach inside the centrifuge, potentially damaging equipment and exposing lab staff to biohazardous material.

    Product
    Power Express, REF B90918
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2955-2024·2024-09-11

    Impella CP Smart Assist Set Lacks Labeling for Potential Device Interaction

    Abiomed is updating labeling for the Impella CP Smart Assist Set to warn about a potential interaction with the Shockwave Coronary IVL Catheter when used during coronary interventions. The interaction was previously undocumented in the device instructions.

    Product
    Impella CP Smart Assist Set, JP; Product Code: 0048-0024-JP;
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2945-2024·2024-09-11

    Heparin Gore Viabahn VBX Endoprosthesis Recalled for Packaging Defects

    W L Gore & Associates is recalling Heparin Gore Viabahn VBX Balloon Expandable Endoprosthesis devices due to packaging defects that may compromise sterility assurance and heparin activity.

    Product
    Heparin, Gore Viabahn VBX, Balloon Expandable Endoprosthesis, for the following Reference numbers: United States: BXB051501A BXB051502A BXB051901A BXB051902A BXB052901A BXB052902A BXB053901A BXB053902A BXB055901A BXB055902A BXB057901A BXB057902A BXB061501A BXB061502A BXB061
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2965-2024·2024-09-11

    Impella 5.5 Device Recalled for Missing Labeling on Catheter Interaction

    Abiomed is updating labeling for Impella 5.5 cardiac support pumps to include information about a potential device interaction with Shockwave Coronary IVL Catheters during coronary interventions.

    Product
    Impella 5.5 with SmartAssist S2 Set, US; Product Code: 1000100;
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2946-2024·2024-09-11

    W L Gore Recalls Heparin Viabahn VBX Endoprosthesis Due to Packaging Defects

    W L Gore & Associates is recalling specific lots of Heparin, Gore Viabahn VBX Balloon Expandable Endoprosthesis because packaging defects may compromise sterility and heparin activity.

    Product
    Heparin, Gore Viabahn VBX, Balloon Expandable Endoprosthesis, for the following Reference numbers: United States: BXB055902C, BXB063902C, BXB065902C, BXB067902C, BXB073902C, BXB075902C, BXB077902C, BXB083902C, BXB085902C, BXB087902C, BXB093902C, BXB095902C, BXB097902C *Fo
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2947-2024·2024-09-11

    BD Pyxis QFill Medication Cabinet Software Issue Causes Incorrect Bin Labeling

    A software bug in BD Pyxis QFill medication cabinet systems may print incorrect medication bin labels during restocking, potentially causing medication errors. Three units are affected.

    Product
    BD Pyxis QFill Replenishment Station, REF: 138904-01, medication cabinet system
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2956-2024·2024-09-11

    Impella CP Pump Set Recalled for Potential Device Interaction

    Abiomed is recalling the Impella CP Pump Set due to a potential device interaction with the Shockwave Coronary IVL Catheter during coronary interventions. The manufacturer will update device instructions to address this interaction.

    Product
    Impella CP Pump Set, Japan; Product Code: 0048-0034-JP;
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-1546-2024·2024-09-11

    Beckman Coulter DxI 9000 Analyzer Recalled for Leaking Wash Buffer Tank

    Beckman Coulter is recalling 17 DxI 9000 Access Immunoassay Analyzers due to cracks in the Internal Wash Buffer Tank that can cause leaking, potentially delaying test results and exposing users to chemical and physical hazards.

    Product
    DxI 9000 Access Immunoassay Analyzer, REF C11137, vitro diagnostic device used for the quantitative, semi-quantitative, or qualitative determination of various analyte concentrations found in human body fluids.
    Category
    Medical Device
    Distribution
    Distributed nationwide