The Recall Desk

Recalls

All US Product Recalls

Searchable archive of product recalls from the FDA, USDA FSIS, CPSC, NHTSA, and EPA — translated into plain English, severity-scored from objective criteria, and always linked back to the original government notice.

How to read this listing

Every recall on this list has been scored 1–5 against an objective rubric from the agency’s own classification, presence of reported injuries or deaths, distribution scope, and hazard type. The colored severity badge on each card is the score — 5 (Critical) means deaths or serious injuries are reported, 4 (Severe) means significant injury or hospitalization risk, and 3 (High) means a known hazard with no confirmed harm yet. Filter to 3+ (High and above) if you want to skip routine Class-III notices.

The agency chips above control which streams are visible. FDA spans food, drugs, and medical devices. USDA FSIS is meat, poultry, and processed egg products. CPSC is household consumer products. NHTSA is vehicles, tires, and child seats. Nationwide on a card means the recall affects every US state — most do — while a state list means distribution was limited.

Click any recall to see the full summary, affected lot codes and model numbers, the agency’s own classification, and a direct link back to the original government notice for verification.

Filters

Agency

Category

Minimum severity

Clear filters

3751–3775 of 27375

  • HighFDA (Devices)·Z-0474-2025·2024-11-27

    Posi-Stop Injection Needles Recalled Due to Manufacturing Debris Blocking Injection Flow

    Hobbs Medical recalls Posi-Stop injection needles because manufacturing debris can block the needle, preventing injection solutions from flowing properly. Affected units were distributed across multiple US states and Canada.

    Product
    Posi-Stop Injection Needle, 25 Gauge, Catalog Number: 4718
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0494-2025·2024-11-27

    Abbott Navitor Heart Valve Recalled for Leaflet Deflection Manufacturing Defect

    Abbott Medical is recalling 8 units of the Navitor 27mm transcatheter aortic heart valve due to a manufacturing error in leaflet deflection that may affect valve durability and function.

    Product
    Abbott Navitor, Vision Technology, Transcatheter Aortic Heart Valve, 27 mm, NVRO-27, Sterile
    Category
    Medical Device
    Distribution
    1 state
  • HighFDA (Devices)·Z-0472-2025·2024-11-27

    Posi-Stop Injection Needle Recalled Due to Manufacturing Debris Blockage

    Hobbs Medical is recalling Posi-Stop Injection Needles (23 Gauge, Lot H11-23-057) because some units contain manufacturing debris that blocks the needle opening, preventing injection solutions from flowing properly.

    Product
    Posi-Stop Injection Needle, 23 Gauge, Catalog Number: 4721
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0471-2025·2024-11-27

    Injection Needles Recalled for Manufacturing Debris Blocking Medication Flow

    Hobbs Medical is recalling Posi-Stop Injection Needles due to manufacturing debris inside the needle shaft that blocks medication flow. The affected lot was distributed across multiple US states and Canada.

    Product
    Posi-Stop Injection Needle, 23 Gauge, Catalog Number: 4716
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0495-2025·2024-11-27

    Abbott Navitor Transcatheter Aortic Valve Recalled for Manufacturing Defect

    Abbott is recalling Abbott Navitor Transcatheter Aortic Heart Valves (27 mm) due to a manufacturing error causing leaflet deflection values outside specifications. This could affect valve durability and potentially cause valve failure.

    Product
    Abbott Navitor Transcatheter Aortic Heart Valve, 27 mm, NVTR-27, Sterile
    Category
    Medical Device
    Distribution
    1 state
  • HighFDA (Devices)·Z-0476-2025·2024-11-27

    FDA Recalls Posi-Stop Injection Needles Due to Manufacturing Debris

    Hobbs Medical is recalling Posi-Stop Injection Needles (25 gauge) because some units contain debris in the needle shaft that blocks injection solution flow.

    Product
    Posi-Stop Injection Needle, 25 Gauge, Catalog Number: 4723
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0473-2025·2024-11-27

    Posi-Stop Injection Needles recalled for manufacturing debris blockage

    Hobbs Medical is recalling Posi-Stop Injection Needles due to manufacturing debris that can block needle flow. Some units may contain debris in the inner sheath that prevents injection solutions from functioning properly.

    Product
    Posi-Stop Injection Needle, 25 Gauge, Catalog Number: 4704
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0467-2025·2024-11-27

    Bard Marquee Biopsy Instruments Recalled for Potential Needle Detachment

    Bard Peripheral Vascular Inc. is recalling Bard Marquee Disposable Core Biopsy Instrument Kits due to a manufacturing defect where some units lack a needle retention feature, risking detachment during use and potential tissue damage or bleeding.

    Product
    Bard Marquee Disposable Core Biopsy Instrument Kit: BARD MARQUEE KIT 12G X 10 CM, REF: MQK1210; BARD MARQUEE 12G X 10 CM, REF: MQ1210; BARD MARQUEE Kit 12G X 13 CM, REF: MQK1213; BARD MARQUEE 12G X 13 CM, REF: MQ1213
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0466-2025·2024-11-27

    Smiths Medical CADD-Solis AC adapter input plugs pose electrical shock risk

    Smiths Medical is recalling 156,400 CADD-Solis AC adapters due to damaged or broken input plugs that may expose metal contacts. The affected adapters could pose a risk of electrical shock or fire.

    Product
    smiths medical CADD-Solis Li-ion Rechargeable Battery Packs AC adapter, Model Number REF 21-0270-25, for use with the CADD-Solis infusion pumps
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-0487-2025·2024-11-27

    Ethicon Recalls Monocryl Sutures Due to Component Mix-Up

    Ethicon, Inc. is recalling 16,524 units of Monocryl sutures because a manufacturing error may result in incorrect needle types, sizes, or suture lengths.

    Product
    MONOCRYL" (poliglecaprone 25) Suture REF Y936H MONOCRYL" Sutures are indicated for use in general soft tissue approximation and/or ligation, but not for use in cardiovascular and neurological tissues, microsurgery or ophthalmic surgery.
    Category
    Medical Device
    Distribution
    45 states
  • HighFDA (Devices)·Z-0484-2025·2024-11-27

    Maquet Cardiovascular Recalls Acrobat-i Positioners Due to Sterility Concerns

    Maquet Cardiovascular is recalling 14,338 Acrobat-i Positioners because manufacturing deviations compromised the sterile barrier, meaning sterility cannot be assured during the product's 2-year shelf life.

    Product
    Acrobat-i Positioner. Model Number C-XP-5000Z
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-0501-2025·2024-11-27

    OrganOx metra Liver Perfusion System Recalled for Battery Damage

    OrganOx Ltd is recalling 20 metra liver perfusion systems because battery movement caused a cell to short against the retention bracket.

    Product
    OrganOx metra -Intended as a Normothermic Machine Perfusion system of donor transport livers. Model/Catalog Number: D0003 The OrganOx metra is a transportable device intended to be used to sustain donor livers destined for transplantation in a functioning state for a total
    Category
    Medical Device
    Distribution
    10 states
  • CriticalFDA (Devices)·Z-0304-2025·2024-11-20

    Draeger Atlan A350 Anesthesia Workstation Piston Ventilator Failure

    Draeger Medical is recalling the Atlan A350 anesthesia workstation due to failures of the piston ventilator that either occurred before use or during patient anesthesia. Approximately 1,492 units are affected.

    Product
    Brand Name: Atlan Product Name: Atlan A350 Model/Catalog Number: 8211500 Software Version: Not applicable Component: Not applicable
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • CriticalFDA (Devices)·Z-0303-2025·2024-11-20

    Boston Scientific POLARx Cryoablation Catheters Instructions Updated for Atrio-esophageal Fistula Risk

    Boston Scientific issued a Class I recall of POLARx and POLARx FIT Cryoablation Balloon Catheters. Instructions for use are being updated due to risk of atrio-esophageal fistula, a serious complication.

    Product
    Boston Scientific SMARTFREEZE CRYO CONSOLE: Console: Material Number M004CRBS4000; CONSOLE REFURB: Material Number M004CRBS400R0; CONSOLE HOSPITAL, Material Number M004CRBS400H0, CONSOLE ZERO, Material Number M004CRBS400Z0
    Category
    Medical Device
    Distribution
    0 states
  • CriticalFDA (Devices)·Z-0310-2025·2024-11-20

    Monoject Insulin Syringes Recalled for Incompatibility with Needleless IV Connectors

    Cardinal Health recalled approximately 371,326 Monoject U-100 insulin syringes due to incompatibility with needleless IV connectors. Affected units should not be used for IV push insulin administration via these connectors.

    Product
    Monoject U-100 1 mL Insulin Syringe Luer-Lock with Tip Cap Soft Pack, REF 1188100777
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0294-2025·2024-11-20

    Aeris EVO Ventilator May Develop Flow Sensor Fouling from Aerosols

    Philips Respironics Aeris EVO ventilators may accumulate aerosol deposits on the internal flow sensor, potentially causing inaccurate flow measurements.

    Product
    Aeris EVO. Model Number: VT2110X24B. Intended for invasive and non-invasive ventilation of pediatric through adult patients weighing at least 2.5 kg in institutional, home, and non-emergency transport settings.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0298-2025·2024-11-20

    FDA Updates POLARx Cryoablation Catheter Instructions for Atrio-esophageal Fistula Risk

    Boston Scientific is updating instructions for POLARx and POLARx FIT cryoablation catheters to address atrio-esophageal fistula risks. The FDA classified this as a Class I recall affecting approximately 20,290 units distributed worldwide.

    Product
    Boston Scientific POLARx BALLOON CATHETER LT 28MM OUS, Material Number M004CRBS2100
    Category
    Medical Device
    Distribution
    0 states
  • SevereFDA (Devices)·Z-0293-2025·2024-11-20

    Trilogy EV300 ventilator: potential flow sensor malfunction from aerosol accumulation

    Philips Respironics is recalling 34,146 Trilogy EV300 ventilators due to potential aerosol accumulation on the internal flow sensor, which could cause inaccurate ventilation measurements.

    Product
    Trilogy EV300. Model Numbers: DS2200X11B, IN2200X15B, BL2200X15B, BR2200X18B, CA2200X12B, DE2200X13B, GB2200X15B, ND2200X15B, ES2200X15B, FR2200X14B, FX2200X15B, EU2200X15B, IA2200X15B, IT2200X21B, KR2200X15B, TR2200X15B, EE2200X15B. Intended for invasive and non-invasive venti
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0295-2025·2024-11-20

    Ventilator Model LD2110X23B Recalled for Potential Sensor Measurement Failure

    Philips Respironics is recalling 1,322 Garbin Evo ventilators (Model LD2110X23B) worldwide due to potential aerosol accumulation that could cause inaccurate flow sensor readings, posing a risk to patient care.

    Product
    Garbin Evo. Model Number: LD2110X23B. Intended for invasive and non-invasive ventilation of pediatric through adult patients weighing at least 2.5 kg in institutional, home, and non-emergency transport settings.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0296-2025·2024-11-20

    Philips LifeVent EVO2 ventilators recalled for potential sensor accuracy failure

    Philips Respironics is recalling LifeVent EVO2 ventilators due to potential aerosol deposit accumulation on the internal flow sensor that could cause inaccurate measurements during ventilation.

    Product
    LifeVent EVO2. Model Number: SP2100X26B. Intended for invasive and non-invasive ventilation of pediatric through adult patients weighing at least 2.5 kg in institutional, home, and non-emergency transport settings.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0299-2025·2024-11-20

    Cryoablation Balloon Catheter Instructions Updated for Atrio-esophageal Fistula Risk

    Boston Scientific is updating instructions for use of POLARx and POLARx FIT Cryoablation Balloon Catheters to address atrio-esophageal fistula risk. Approximately 5,913 units have been distributed worldwide.

    Product
    Boston Scientific POLARx FIT BALLOON CATHETER ST OUS, Material Number M004CRBS2010
    Category
    Medical Device
    Distribution
    0 states
  • SevereFDA (Devices)·Z-0305-2025·2024-11-20

    Anesthesia workstation piston ventilator may fail before or during use

    Draeger Medical is recalling Atlan A350XL anesthesia workstations due to potential piston ventilator failure that may occur before use or during mechanical ventilation.

    Product
    Brand Name: Atlan Product Name: Atlan A350XL Model/Catalog Number: 8621600 Software Version: Not Applicable Component: Not applicable
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0357-2025·2024-11-20

    Medline Recalls Non-Sterile Urinalysis Kit Specimen Containers

    Medline Industries is recalling 626,305 urinalysis kits because the specimen containers are labeled sterile but are non-sterile, posing a risk of unnecessary treatment or hospitalization.

    Product
    URINALYSIS KIT 4, SKU DYLAB1021; Component No. 503581
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0404-2025·2024-11-20

    AVID Medical Recalls Halyard Laparoscopy Trays Due to Metal Flakes

    AVID Medical is recalling 42 Halyard Laparoscopy Trays because sponge forceps and towel clamps may release metal flakes that could enter a patient's surgical site.

    Product
    Halyard LAPAROSCOPY TRAY - Medical convenience kits Model Number: LANC006-25
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • SevereFDA (Devices)·Z-0406-2025·2024-11-20

    AVID Medical Recalls Halyard C Section Bundles Due to Metal Flakes

    AVID Medical, Inc. is recalling Halyard C Section Bundles because small metal flakes may detach from sponge forceps and towel clamps, posing a risk of foreign body reactions.

    Product
    Halyard C SECTION BUNDLE - Medical convenience kits Model Number: LANC015-34
    Category
    Medical Device
    Distribution
    Distributed nationwide