Atrium Medical Recalls Advanta VXT Grafts Due to Label Adhesion Issue
Atrium Medical Corporation is recalling Advanta VXT Grafts because the inner tray label may adhere to the outer tray, making it difficult to remove the tray onto the sterile field.
What this means for you
Minor labeling or packaging issue, or a voluntary precautionary recall. Risk of harm is low but real — follow the manufacturer's instructions.
Our severity reasoning: The recall is classified as FDA Class II, and the issue is a packaging/labeling defect that creates a procedural difficulty rather than a direct risk of serious injury or death.
Plain-English summary
Atrium Medical Corporation is recalling Advanta VXT Grafts, which are intended for use in arterial vascular reconstruction, segmental bypass, and for arteriovenous vascular access. The recall affects products manufactured between April 3, 2012, and May 14, 2013, which can be identified by expiration dates between April 2017 and May 2018.
The recall was initiated because the inner tray label may adhere to the wall of the outer tray. This adhesion makes it difficult to remove the tray onto the sterile field during surgical preparation.
The affected products were distributed worldwide, including nationwide in the United States and to numerous international countries. Healthcare providers and facilities should stop using the affected units and contact Atrium Medical Corporation for further instructions.
The recalled product
- Product
- Advanta VXT Grafts <6mm Intended for use in arterial vascular reconstruction, segmental bypass, and for arteriovenous vascular access.
- Manufacturer
- Atrium Medical Corporation
- Category
- Medical Device — Vascular Grafts
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (4)
- Product manufactured between April 3
- 2012 and May 14
- 2013 and can be identified by their expiration date
- between April 2017 and May 2018.
Distribution
Part of a larger recall action
This product is one of 14 recalled by Atrium Medical Corporation under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 14 products in this recall →Related recalls
Same manufacturer · Atrium Medical Corporation
See all →- ModerateiCast Covered Stent Recalled for Unique Device Identifier Labeling Error
FDA (Devices) · 2024-10-16
- HighVascular graft separation reported in ADVANTA VXT medical devices
FDA (Devices) · 2024-06-12
- HighVascular graft recalled due to slider component separation risk
FDA (Devices) · 2024-06-12
- HighVascular graft devices recalled due to slider component separation
FDA (Devices) · 2024-06-12
- HighVascular graft component separation reported in ADVANTA VXT devices
FDA (Devices) · 2024-06-12
Same hazard · packaging defect
See all →- HighMD Wipe Outz Numbing Tattoo Wipes Recalled for Child Poisoning Risk
CPSC · 2026-08-27
- HighV-Loc 90 Absorbable Wound Closure Devices Recalled for Packaging Defects
FDA (Devices) · 2026-08-19
- SevereDermalon Sutures Recalled for Potential Sterile Barrier Packaging Defects
FDA (Devices) · 2026-08-19
- HighV-Loc 180 Absorbable Wound Closure Device Recalled for Packaging Defects
FDA (Devices) · 2026-08-19
- HighBiopsy Forceps Recall: Sterile Packaging Breach Risk
FDA (Devices) · 2026-08-12