FDA Recalls Fiber Stripper Tools Due to Sterilization Validation Issues
American Medical Systems is recalling 16,710 Fiber Stripper tools because cleaning and sterilization validation data do not meet FDA guidance for reusable products.
What this means for you
Minor labeling or packaging issue, or a voluntary precautionary recall. Risk of harm is low but real — follow the manufacturer's instructions.
Our severity reasoning: The recall is classified as FDA Class II, but the hazard is a documentation/validation deficiency regarding sterilization methods rather than a reported injury or high-risk pathogen, fitting the criteria for a moderate severity voluntary precautionary recall.
Plain-English summary
The U.S. Food and Drug Administration (FDA) has issued a Class II recall for the Tool, Stripper W/BLD, 28S, Autoclavable (Model 80-10011-002). The recall involves 16,710 units manufactured between April 8, 2012, and April 8, 2015. These tools are used to strip the protective jacket off the end of Endostat or SureFlex Fibers and are distributed worldwide, including in the United States.
The recall was initiated because validation data related to cleaning instructions and sterilization methods for the Sureflex Reusable Fibers and the Reusable Stripper and Cleaver Accessories do not meet the new FDA guidance on qualifying reusable products. The Fiber Stripper does not come into direct contact with the patient.
Healthcare facilities and users should stop using the affected devices and contact American Medical Systems Innovation Center - Silicon Valley for further instructions on the recall process.
The recalled product
- Product
- Tool, Stripper W/BLD, 28S, Autoclavable; The Fiber Stripper is a tool provided for stripping the protective jacket off the end of an Endostat or SureFlex Fiber. The Fiber Stripper does not come in to direct contact with the patient. It is available in several sizes, correspond
- Affected units
- 16,710
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (4)
- Model 80-10011-002
- All product manufactured from April 8
- 2012 to April 8
- 2015
Distribution
Distributed nationwide across the United States.
Part of a larger recall action
This product is one of 32 recalled by American Medical Systems Innovation Center - Silicon Valley under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 32 products in this recall →Related recalls
Same manufacturer · American Medical Systems Innovation Center - Silicon Valley
See all →- ModerateFDA Recalls Disposable Fiber Strippers Due to Sterilization Validation Issues
FDA (Devices) · 2015-07-29
- ModerateFDA Recalls Fiber Cleaver Accessories Due to Sterilization Validation Issues
FDA (Devices) · 2015-07-29
- ModerateFDA Recalls Fiber Cleavers Due to Sterilization Validation Issues
FDA (Devices) · 2015-07-29
- HighFDA Recalls Disposable EndoStat Fiber Strippers Due to Validation Deficiencies
FDA (Devices) · 2015-07-29
- ModerateFDA Recalls Fiber Stripper Tools Due to Sterilization Validation Issues
FDA (Devices) · 2015-07-29
Same hazard · sterilization validation
See all →- HighFDA Recalls Cardioplegia Solution Due to Lack of Sterility Assurance
FDA (Drugs) · 2023-09-06
- HighFDA Recalls Cardioplegia Solution Due to Lack of Sterility Assurance
FDA (Drugs) · 2023-08-09
- HighSteris VERIFY Steam Test Pack biological indicators show inconsistent performance
FDA (Devices) · 2023-01-11
- ModerateSPS Sterilization Recalls Boston Scientific Wallstent Tracheobronchial Stents
FDA (Devices) · 2018-09-19
- ModerateSPS Sterilization Recalls Resterilized Boston Scientific Wallstent Enteral Endoprosthesis
FDA (Devices) · 2018-09-19