Synthes 6.5 mm Cannulated Screw Recalled for Labeling Mismatch
Synthes (USA) Products LLC is recalling 6.5 mm Cannulated Screws because the labeling does not match the cleared indications for use in the United States and Canada.
The agency’s classification
FDA (Devices): Class II
Class II is a situation in which use of or exposure to a violative product may cause temporary or medically reversible adverse health consequences, or where the probability of serious adverse health consequences is remote.
This is the agency’s own classification, taken from its notice. The severity score below is our assessment, not the agency’s. How recall classes work
What this means for you
Our assessment, not the agency’s: severity 2/5 (Moderate).
Minor labeling or packaging issue, or a voluntary precautionary recall. Risk of harm is low but real — follow the manufacturer's instructions.
Our severity reasoning: The recall is classified as FDA Class II, but the source text identifies the issue as a labeling mismatch without reporting any illnesses, injuries, or deaths. This aligns with the rubric for minor labeling errors or low-risk issues.
Plain-English summary
Synthes (USA) Products LLC is recalling 6.5 mm Cannulated Screws (Product code HWC, Device Listing Number D028949) due to a labeling discrepancy. The recall is issued because the product labeling does not match the cleared indications for use in the United States and Canada.
The affected devices are intended for fracture fixation of large bones and large bone fragments, including femoral neck fractures and slipped capital femoral epiphyses. The recall covers 19,497,844 units distributed nationwide across all 50 states, the District of Columbia, and Puerto Rico.
Healthcare providers and facilities should stop using the affected screws and contact Synthes (USA) Products LLC for further instructions regarding the return or replacement of the devices.
The recalled product
- Product
- 6.5 mm Cannulated Screw, Product code HWC, Device Listing Number D028949, Screw, Fixation Bone Product Usage: Intended for fracture fixation of large bones and large bone fragments, such as femoral neck fractures; slipped capital femoral epiphyses; an adjunct to DHS in…
- Manufacturer
- Synthes (USA) Products LLC
- Hazard
- Affected units
- 19,497,844
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (1)
- Many affected part numbers
Distribution
Part of a larger recall action
This product is one of 7 recalled by Synthes (USA) Products LLC under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 7 products in this recall →Related recalls
Same manufacturer · Synthes (USA) Products LLC
See all →- HighVOLT locking screw taps swapped between lots carry incorrect thread
FDA (Devices) · 2026-04-08
- HighVOLT bone taps swapped between lots carry the incorrect thread
FDA (Devices) · 2026-04-08
- ModerateLocking bone screws recalled after packaging labeled with the wrong length
FDA (Devices) · 2025-10-29
- ModerateForty six millimetre locking screws recalled over wrong length on packaging
FDA (Devices) · 2025-10-29
- HighSurgical screwdrivers recalled for failure to engage with implant screws
FDA (Devices) · 2024-06-05
Same hazard · mis labeling
See all →- SevereImperio Distribution Recalls Beef Jerky Produced Without Federal Inspection
USDA FSIS · 2026-10-24
- HighJ K Patisserie Chocolate Chip Cookies Recalled for Undeclared Soy
FDA (Food) · 2026-10-14
- HighFreshPoint Recalls Cranberry Chicken Salad Wedges for Undeclared Egg Allergen
FDA (Food) · 2026-10-14
- HighJ K Patisserie & Bakery LLC Recalls Croissants for Undeclared Egg
FDA (Food) · 2026-10-14
- LowMindray ePM Series Patient Monitor Manuals Recalled for Alarm Clarification
FDA (Devices) · 2026-10-14
Similar recalls
- ModerateSynthes Recalls 3.7mm Cannulated Screws Due to Incorrect Labeling
FDA (Devices) · 2015-06-24
- ModerateZimmer Biomet Recalls Mislabeled Cannulated Screws Due to Labeling Error
FDA (Devices) · 2018-03-21
- ModerateSynthes Recalls 4.5mm Multiloc Screws Due to Incorrect Size Labeling
FDA (Devices) · 2012-08-01
- HighSynthes Recalls 3.7mm and 5.0mm Dynamic Locking Screws Due to Breakage
FDA (Devices) · 2013-12-04
- ModerateSynthes Spinal Screws Recalled Due to Incorrect Diameter
FDA (Devices) · 2019-11-06
- ModerateSynthes 2.4 and 2.7 mm Locking Screws Recalled for Mislabeling
FDA (Devices) · 2013-12-04