Ion Beam Applications Recalls Proteus 235 Graphite Blocks Due to Screw Depth Error
Ion Beam Applications S.A. is recalling three Proteus 235 graphite block 8 units because of incorrect screw hole depth relative to the degrader.
What this means for you
Minor labeling or packaging issue, or a voluntary precautionary recall. Risk of harm is low but real — follow the manufacturer's instructions.
Our severity reasoning: The recall is classified as FDA Class II. The source text describes a mechanical defect (incorrect screw hole depth) but does not report any injuries, illnesses, or specific safety hazards like fire or shock, fitting the criteria for a moderate severity recall involving a potential defect without reported harm.
Plain-English summary
Ion Beam Applications S.A. has identified a defect in the Proteus 235 graphite block 8. The issue involves incorrect screw hole depth with respect to the degrader.
The recall covers three units of the product. The distribution pattern is listed as WA, and the specific code information is PAT.115, SAT.116.
The source text does not specify the exact actions consumers or facilities should take, nor does it report any injuries or illnesses associated with this defect.
The recalled product
- Product
- Proteus 235, graphite block 8
- Manufacturer
- Ion Beam Applications S.A.
- Hazard
- Affected units
- 3
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (2)
- PAT.115
- SAT.116
Distribution
Distributed in 1 state:
Related recalls
Same manufacturer · Ion Beam Applications S.A.
See all →- HighIBA proton therapy system may not interrupt beam when gating fails
FDA (Devices) · 2026-03-18
- HighProton Therapy System Software Allows Safety Verification Mechanisms to Be Disabled
FDA (Devices) · 2024-09-18
- HighIBA Proton Therapy System PROTEUS 235 Collision Detection Malfunction
FDA (Devices) · 2024-08-28
- HighProton Therapy System May Continue Irradiation When Accelerator Control Parameters Out of Tolerance
FDA (Devices) · 2024-06-12
- HighProton Therapy System Recall: Safety Parameter Failures Risk Unintended Radiation
FDA (Devices) · 2024-05-01
Same hazard · mechanical defect
See all →- HighMobile Digital Radiographic System Arm Drop Risk During Patient Exams
FDA (Devices) · 2026-07-22
- ModerateSurgical driver systems recalled over out of the box driver wobble
FDA (Devices) · 2025-09-03
- HighBeckman Coulter DxI 9000 Analyzer wash wheel mixer defect may prevent operation
FDA (Devices) · 2025-03-19
- SevereBaxter Spectrum IQ Infusion System may have missing motor mounting screws
FDA (Devices) · 2025-03-12
- HighVNS Therapy Generator May Stop Delivering Stimulation Due to Mechanical Defect
FDA (Devices) · 2025-02-12