Integra C7000 CUSA Clarity System Recall for Drying Time Discrepancy
Integra LifeSciences is recalling C7000 CUSA Clarity systems because the operator manual lists a 30-minute drying time, but 40 minutes are required for complete drying.
What this means for you
Minor labeling or packaging issue, or a voluntary precautionary recall. Risk of harm is low but real — follow the manufacturer's instructions.
Our severity reasoning: The recall is classified as FDA Class II. The hazard involves a documentation error regarding drying times, which is a low-risk contamination or labeling issue without reported injuries, fitting the Moderate severity criteria.
Plain-English summary
Integra LifeSciences Corp. is recalling the C7000 - CUSA Clarity Ultrasonic Tissue Ablation System. The recall involves the 36 kHz Sterilization Tray (C7136 Rev C / 72904491 Rev A) system.
The recall is due to a discrepancy in the CUSA Clarity Operators manual. The manual states that 30 minutes is the minimum dry time for the 36 kHz Sterilization Tray and components. However, 40 minutes are required for complete drying, meaning the system does not meet the Dry Time Criteria for a 30-minute cycle.
The affected products were distributed in the United States and internationally. Users should consult the recall notice for specific instructions on how to proceed.
The recalled product
- Product
- C7000 - CUSA¿ Clarity Ultrasonic Tissue Ablation System
- Manufacturer
- Integra LifeSciences Corp.
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (1)
- Czech OPS Manual P/N 60905787
Distribution
Part of a larger recall action
This product is one of 42 recalled by Integra LifeSciences Corp. under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 42 products in this recall →Related recalls
Same manufacturer · Integra LifeSciences Corp.
See all →- HighAURORA Surgiscope System Obturator May Break or Separate
FDA (Devices) · 2025-03-12
- HighMediHoney Gel Wound Dressing Recall: Potential Induction Seal Defect
FDA (Devices) · 2025-02-19
- ModerateIntegra implantable hydrocephalus valve recalled for incorrect product description on labels
FDA (Devices) · 2025-01-29
- ModerateCODMAN CERTAS Plus programmable valve recalled for incorrect label descriptions
FDA (Devices) · 2025-01-29
- ModerateProgrammable Valve Device Recalled Due to Incorrect Product Description Labels
FDA (Devices) · 2025-01-29
Same hazard · documentation error
See all →- ModerateHenry Schein Recalls Structur 2 SC Temporary Resin Cartridges for Incorrect Packaging
FDA (Devices) · 2026-09-02
- ModerateConMed Suture Anchor Recalled for Incorrect Patient Implant Card
FDA (Devices) · 2026-09-02
- ModeratePower Over Fiber Base Modules Recalled Due to Incorrect Laser Classification and Labeling
FDA (Devices) · 2026-08-05
- ModerateEmbrace standard drill tower surgical technique lists mixed-up article numbers
FDA (Devices) · 2026-04-01
- ModerateEmbrace shoulder drill tower surgical technique lists mixed-up article numbers
FDA (Devices) · 2026-04-01