NuVasive Recalls 6.5mm Cannulated Screw Shanks Due to Disengagement Risk
NuVasive Inc is recalling 240 units of 6.5mm x 45mm Cannulated Screw Shanks because the tulip portion can disengage from the shank after implantation.
The agency’s classification
FDA (Devices): Class II
Class II is a situation in which use of or exposure to a violative product may cause temporary or medically reversible adverse health consequences, or where the probability of serious adverse health consequences is remote.
This is the agency’s own classification, taken from its notice. The severity score below is our assessment, not the agency’s. How recall classes work
What this means for you
Our assessment, not the agency’s: severity 4/5 (Severe).
The hazard poses a serious risk of illness, injury, or structural failure. Stop using the product immediately and contact the manufacturer for a refund or repair.
Our severity reasoning: The recall is classified as FDA Class II and involves a structural defect in a medical device that can lead to significant injury.
Plain-English summary
NuVasive Inc is recalling 240 units of 6.5mm x 45mm Cannulated Screw Shanks. The recall includes batches JK2071, JK2169, and JK2167, as well as subsequent codes KWP, KWQ, MNH, and MNI.
The recall is being conducted because the tulip portion of the screw assembly can disengage from the shank after implantation. The affected devices were distributed nationwide, including in Oregon, Missouri, Florida, Wisconsin, California, and North Carolina.
This is a Class II recall. Healthcare providers should contact NuVasive Inc for instructions on how to handle the affected devices.
The recalled product
- Product
- 6.5mm x 45mm Cannulated Screw Shank Subsequent Codes: KWP, KWQ, MNH, MNI
- Manufacturer
- NuVasive Inc
- Affected units
- 240
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (3)
- Batch: JK2071
- JK2169
- JK2167.
Distribution
Part of a larger recall action
This product is one of 31 recalled by NuVasive Inc under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 31 products in this recall →Related recalls
Same manufacturer · NuVasive Inc
See all →- ModerateNuVasive Pulse III Multimodality System remote monitoring connection failure
FDA (Devices) · 2023-02-15
- HighSpinal implant insert may fail to disengage from vertebral body device
FDA (Devices) · 2022-12-28
- HighNuVasive Simplify Disc UDI Barcode Contains Incorrect Size Information
FDA (Devices) · 2022-08-03
- ModerateNuvasive NVM5 EMG Module Recalled for Incorrect Component
FDA (Devices) · 2020-07-29
- HighNuVasive MAGEC 2 Spinal Rods Recalled for Actuator Separation
FDA (Devices) · 2020-05-13
Same hazard · structural defect
See all →- SevereSubaru Recalls 2026 Forester and Crosstrek for Ball Joint Defect
NHTSA · 2026-10-19
- SevereVolvo Recalls EX30 and EX30CC Vehicles for Head Restraint Defect
NHTSA · 2026-10-09
- Severe
- Severe
- SevereDecathlon Recalls Van Rysel GRVL AF Bicycles Due to Crash Hazard
CPSC · 2026-10-08
Similar recalls
- HighSpinal Implant Screws Recalled Due to Potential Weld Failure
FDA (Devices) · 2022-12-14
- SevereDePuy Spine VIPER Polyaxial Screws Recalled for Potential Disassociation
FDA (Devices) · 2013-01-30
- SevereDePuy Spine VIPER Polyaxial Screw Recall for Potential Disassociation
FDA (Devices) · 2013-01-30
- HighSpinal implant screws recalled for potential weld separation
FDA (Devices) · 2022-12-14
- SevereDePuy Spine VIPER Polyaxial Screws Recalled for Potential Separation
FDA (Devices) · 2013-01-30
- SevereDePuy Spine Recalls VIPER Polyaxial Screws Due to Potential Separation
FDA (Devices) · 2013-01-30