Siemens Symbia Intevo 6 SPECT/CT Software Recall for Data Input Error
Siemens is recalling two Symbia Intevo 6 SPECT/CT systems because a software option may prevent users from modifying specific data input values during calibration.
The agency’s classification
FDA (Devices): Class II
Class II is a situation in which use of or exposure to a violative product may cause temporary or medically reversible adverse health consequences, or where the probability of serious adverse health consequences is remote.
This is the agency’s own classification, taken from its notice. The severity score below is our assessment, not the agency’s. How recall classes work
What this means for you
Our assessment, not the agency’s: severity 2/5 (Moderate).
Minor labeling or packaging issue, or a voluntary precautionary recall. Risk of harm is low but real — follow the manufacturer's instructions.
Our severity reasoning: The recall is classified as FDA Class II, and the source text describes a software limitation without reporting any injuries, illnesses, or deaths, fitting the criteria for a moderate severity score.
Plain-English summary
Siemens Medical Solutions USA, Inc. is recalling two units of the Symbia Intevo 6 SPECT/CT System. The affected units, identified by serial numbers 2141 and 2144, were distributed to Malaysia, France, Japan, and Reunion Island.
The recall is due to a defect in the Broad Quantification option of the Symbia product software version VB20A. This defect may prevent the modification of two data input values. The issue occurs when the system is calibrated with phantoms that do not have a volume of 6500ml and/or when residual dose needs to be entered.
Healthcare professionals using these systems should contact Siemens Medical Solutions USA, Inc. for further instructions on resolving the software issue.
The recalled product
- Product
- Symbia Intevo 6, SPECT/CT System, Emission Computed Tomography System To detect or image the distribution of radionuclides in the body or organ, using the following techniques: planar imaging, whole body imaging, tomographic imaging for isotopes with energies up to 588keV.…
- Manufacturer
- Siemens Medical Solutions USA, Inc.
- Hazard
- Affected units
- 2
Is your product affected?
Check your packaging against the codes below. If any of them match, the product is part of this recall.
Lot numbers (2)
- Serial Number: 2141
- 2144
Distribution
Distribution scope not specified by the agency.
Part of a larger recall action
This product is one of 2 recalled by Siemens Medical Solutions USA, Inc. under a single FDA (Devices) recall action. The agency files each product separately, so the size of the action is not visible from this page alone.
See all 2 products in this recall →Related recalls
Same manufacturer · Siemens Medical Solutions USA, Inc.
See all →- ModerateARTIS icono biplane medical imaging system detector lift malfunction
FDA (Devices) · 2026-07-08
- HighARTIS icono floor Medical Imaging System Detector Movement Loss Recall
FDA (Devices) · 2026-07-08
- ModerateARTIS icono ceiling medical imaging monitor suspension system
FDA (Devices) · 2026-07-08
- HighARTIS Icono Ceiling Model 11328100 Loss of Movement Capability Recall
FDA (Devices) · 2026-07-08
- HighARTIS pheno systems may display zero dose while dose is applied
FDA (Devices) · 2026-06-10
Same hazard · software defect
See all →- HighPhilips Spectral CT Systems Recalled for Software Issues Affecting Safety
FDA (Devices) · 2026-10-14
- ModerateBeckman Coulter Recalls DxC 500i Clinical Analyzer Modules Due to Software Error
FDA (Devices) · 2026-10-14
- ModerateSteris HexaVue Focus Integration System Recalled for Patient Data Mismatch
FDA (Devices) · 2026-10-14
- ModerateUnited Imaging uCT 550 CT Systems Recalled for Software Defect
FDA (Devices) · 2026-10-07
- ModerateUnited Imaging uMI Panvivo S PET/CT Systems Recalled for Software Defect
FDA (Devices) · 2026-10-07
Similar recalls
- HighSPECT/CT Imaging Systems Recalled Due to Defective Balancing Weight Bolts
FDA (Devices) · 2022-04-13
- HighSiemens Symbia S and T Series SPECT Systems Recalled for Detector Motion
FDA (Devices) · 2020-09-09
- HighSiemens Symbia Intevo SPECT CT Systems Recalled for Detector Motion
FDA (Devices) · 2015-01-14
- HighSiemens Symbia CT Systems Recalled for Internal Component Damage
FDA (Devices) · 2015-01-21
- HighSiemens Symbia Intevo SPECT/CT Systems Recalled for Rubber Isolator Aging
FDA (Devices) · 2014-10-08
- ModerateSiemens Symbia E SPECT Systems Recalled for Incorrect Radial Motor Assembly
FDA (Devices) · 2015-03-25