The Recall Desk

State

Indiana product recalls

73,092 recalls have nationwide distribution and so reach Indiana. 9,585 additional recalls listed Indiana specifically in their distribution scope.

What the numbers show

Total
9,585
Critical
1,913
Severe
2,148
Most recent
2026-09-23

Of the 9,585 recalls naming Indiana we have scored against our rubric, 1,913 (20%) are Critical — deaths or serious injuries reported, or the agency’s own highest classification — and 2,148 (22%) are Severe.

These figures cover only the 9,585 recalls whose distribution notice names Indiana specifically. The 73,092 nationwide recalls listed below reach every state, so counting them here would make every state page show the same numbers.

10251–10275 of 82677

  • SevereFDA (Devices)·Z-1548-2024·2024-09-18

    Olympus Electrosurgical Knives Recalled Due to Breakage During Use

    Olympus Corporation recalled 2,525 electrosurgical knives (KD-645L) nationwide after reports of serious injury from knives breaking off during use. Users must follow Instructions for Use regarding proper electrosurgical unit compatibility and output settings.

    Product
    Olympus Triangle Tip Electrosurgical Knives- to be used with Olympus endoscopes and electrosurgical units to cut tissue using high-frequency current within the upper digestive tract Model: KD-645L
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3119-2024·2024-09-18

    Medline Surgical Suction Kits Recalled for Potential Loss of Suction

    Medline Industries recalls specific lots of semi-rigid suction liners in C-section convenience kits due to reported adverse events. The liners may lose suction during intermittent use.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: MERCY TIFFIN C-SECTION, Pack Number DYNJ909732
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3125-2024·2024-09-18

    Proton therapy system may display insufficient CBCT images during positioning

    Hitachi PROBEAT-FR proton therapy systems may display an insufficient number of CBCT images during 3D positioning when the Float Image Selection button is pressed, potentially affecting treatment planning accuracy.

    Product
    Brand Name: PROBEAT Product Name: PROBEAT-FR Model/Catalog Number: N/A Software Version: N/A Product Description: The PROBEAT-FR is a proton beam irradiation system, which provides a therapeutic proton beam for clinical treatment. It is designed to deliver a proton beam wit
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3116-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled for Potential Suction Loss

    Medline is recalling 1,800 units of semi-rigid suction liners used in anesthesia turnover kits due to reported adverse events related to potential loss of suction during intermittent use. Affected lots were manufactured between September and November 2023.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: ANES TURNOVER KIT-LF, Pack Number DYNJAA10338J
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3068-2024·2024-09-18

    FDA Recalls Transcend Dental Composite Material Due to Manufacturing Defect

    Ultradent Products is recalling Transcend Singles Universal Body dental composite resin due to red particulates found during manufacturing. The recall affects approximately 2,450 units distributed in the US and several foreign countries.

    Product
    Brand Name: Transcend Product Name: Transcend Singles Universal Body (UB) Refill 10pk Model/Catalog Number: 4757- Software Version: N/A Product Description: Transcend universal composite is a light-cured, tooth shade resin composite material (Bis-GMA-based) to be used for d
    Category
    Medical Device
    Distribution
    35 states
  • HighFDA (Devices)·Z-3064-2024·2024-09-18

    ADVIA Chemistry urinary protein reagent quality control failure

    Siemens Healthcare is recalling ADVIA Chemistry urinary protein test reagents due to potential quality control issues that could produce inaccurate patient results.

    Product
    ADVIA Chemistry Urinary/Cerebrospinal Fluid Protein (UCFP); Siemens Material Number (SMN): 11319151
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighNHTSA·24V697000·2024-09-18

    BMW and MINI vehicles brake system failure integrated module welds break

    BMW and MINI are recalling certain 2023–2025 vehicles because welds in the brake control module may break, causing loss of power brake assist, rear brakes, and stability control. This increases crash risk.

    Product
    BMW — BMW, MINI, ROLLS-ROYCE 740I, COOPER, X7, SPECTRE
    Category
    Vehicle
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2977-2024·2024-09-18

    HeNe laser system recalled for removable key safety control defect

    Pacific Lasertech is recalling the N-LHP-928 HeNe Laser System (35 mW) because the key-actuated safety control can be removed while the laser is operating, defeating the required master control mechanism.

    Product
    N-LHP-928, HeNe Laser System, 35 mW
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3065-2024·2024-09-18

    Siemens Dimension Vista Bilirubin Reagent Cartridges Recalled Due to Underfilled Wells

    Siemens Healthcare Diagnostics is recalling one lot of Dimension Vista Total Bilirubin Flex Reagent Cartridges due to underfilled wells during manufacturing. The defect may result in inaccurate test results for calibrators, quality control, and patient samples.

    Product
    Dimension Vista¿ Total Bilirubin (TBIL) Flex Reagent Cartridge; Siemens Material Number (SMN): 10445146;
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3063-2024·2024-09-18

    Siemens Atellica CH diagnostic reagent batch may produce biased results

    A specific lot of Siemens Atellica CH urinary/cerebrospinal fluid protein reagent (lot 130414) may produce biased quality control results and inaccurate patient test outcomes. Approximately 229 units were distributed in the United States and 935 internationally.

    Product
    Atellica CH Urinary/Cerebrospinal Fluid Protein (UCFP); Siemens Material Number (SMN): 11097543
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2975-2024·2024-09-18

    HeNe Laser System Allows Key Removal While Operating

    Pacific LaserTech's 25-LHP-828 HeNe laser systems allow the key to be removed while operating, violating federal safety requirements. Four units distributed nationwide lack proper controls to prevent unintended laser operation.

    Product
    25-LHP-828, HeNe Laser System, 35 mW
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3127-2024·2024-09-18

    Proton Therapy System May Display Insufficient Images During Treatment Planning

    FDA recalls the PROBEAT-V proton beam therapy system due to a software issue where the 3D image positioning mode may display insufficient images, potentially affecting treatment planning accuracy.

    Product
    Brand Name: PROBEAT Product Name: PROBEAT-V Model/Catalog Number: N/A Software Version: N/A Product Description: The PROBEAT-V is a proton beam irradiation system, which provides a therapeutic proton beam for clinical treatment. It is designed to deliver a proton beam with
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3089-2024·2024-09-18

    Proton Therapy System Software Allows Safety Verification Mechanisms to Be Disabled

    The IBA Proton Therapy System (PROTEUS 235 and related models) has a software defect allowing safety parameter verification mechanisms to be deactivated during clinical use. This affects 35 units distributed worldwide.

    Product
    IBA Proton Therapy System - PROTEUS 235 ProteusPLUS and ProteusONE Software versions: PTS-8 versions, PTS-10 versions, PTS-11 versions, and PTS-12 versions
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3122-2024·2024-09-18

    FilmArray 2.0 Diagnostic Instruments Recalled for Calibration Error Affecting Test Results

    BioFire Diagnostics is recalling FilmArray 2.0 diagnostic instruments that may have been incorrectly calibrated, leading to false positive and false negative results for infectious disease tests including Salmonella, Giardia, Norovirus, and MRSA.

    Product
    FILMARRAY 2.0 INSTRUMENT, REF: FLM2-ASY-0001, FLM2-ASY-0001-W
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3133-2024·2024-09-18

    Biolox Taper Sleeve Mislabeling: Wrong Component Size in Hip Replacement

    Zimmer GmbH is recalling Biolox Option Taper Sleeves due to mislabeling where packaging labels one neck size but contains the opposite size. These components are used in hip replacement surgery.

    Product
    Biolox Option Taper Sleeve, Type 1 Taper, -6mm Neck - Indicated for use in total hip replacement with cemented or non-cemented femoral and acetabular components. Item Number: 650-1064
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3101-2024·2024-09-18

    Siemens Atellica IM CA 19-9 Assay Recalled for Positive Bias

    Siemens Healthcare Diagnostics is recalling Atellica IM CA 19-9 kits due to positive bias in some samples, particularly in the Asia Pacific population.

    Product
    Atellica IM CA 19-9 (250 Test)- In vitro diagnostic use in the quantitative measurement of the CA 19-9 tumor-associated antigen in human serum using the Atellica CI and Atellica IM Analyzers SMN:10995489
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3096-2024·2024-09-18

    Smith & Nephew Recalls Rotation Medical Tendon Staples Due to Seal Defects

    Smith & Nephew is recalling Rotation Medical Tendon Staples because packaging defects may compromise sterility. The recall affects 6,465 units distributed worldwide.

    Product
    ROTATION MEDICAL TENDON STAPLES (8) (broad indication)-Intended for fixation of prosthetic material to soft tissues. Product Number: 2504-1
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3123-2024·2024-09-18

    BioFire FILMARRAY TORCH Module Recall Due to Calibration Errors

    BioFire is recalling FILMARRAY TORCH modules because calibration errors may cause false positive or negative results for pathogens like Salmonella and MRSA.

    Product
    FILMARRAY TORCH MODULE BOX, HTFA-ASY-0003, HTFA-ASY-0003-W, HTFA-ASY-0003U
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3109-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled for Potential Loss of Suction

    Medline Industries is recalling 407 units of semi-rigid suction liners manufactured between September and November 2023 due to potential loss of suction during intermittent use.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: a) BAPTIST FLOYD BRONCHOSCOPY, Pack Number DYKE1456D; b) ENT MINOR, Pack Number DYNJ908099B; c) HEAD & NECK, Pack Number DYNJ908101B; d) NASAL FESS, Pack Number DYNJ908105B; e) NASAL-LF, Pa
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3093-2024·2024-09-18

    Medline ReNewal Surgical Sealer/Divider Recalled for Incomplete Packaging Seal

    Medline Industries is recalling 2,860 units of its ReNewal Reprocessed Covidien LigaSure Maryland Jaw Sealer/Divider due to potential incomplete seals on packaging trays, which could compromise sterility assurance.

    Product
    Medline ReNewal Reprocessed Covidien LigaSure Maryland Jaw Sealer/Divider, Nano-Coated, Compatible w/ FT10 37 cm FT10 SW Version 4.0.1.15 or lower. Item Number: LF1937CR.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3110-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled for Potential Loss of Suction

    Medline Industries is recalling specific convenience kits with semi-rigid suction liners due to reported adverse events and potential loss of suction during intermittent use. Affected: 358 units distributed in US, Canada, and Panama.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: a) MINOR PROCEDURE, Pack Number CDS981509C; b) GENERAL LAPAROSCOPY CDS, Pack Number CDS981512J; c) OR MAJOR CDS, Pack Number CDS981515D; d) MAJOR-LF, Pack Number DYNJ900709C; e) MAJOR-LF, P
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3111-2024·2024-09-18

    Medline Suction Liners Recalled for Potential Loss of Suction

    Medline is recalling specific lots of semi-rigid suction liners due to potential loss of suction during clinical use. The recall affects convenience kits distributed to healthcare facilities in the US, Canada, and Panama.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: a) ENDO BRONCH PACK, Pack Number DYKE1355; b) ENDO BASIC KIT, Pack Number DYKE1356; c) ENDOSCOPY KIT, Pack Number DYKE1771C
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3115-2024·2024-09-18

    Medline Semi-Rigid Suction Liners Recalled Due to Loss of Suction

    Medline is recalling 444 NICU admit kits containing semi-rigid suction liners due to potential loss or low suction during intermittent use. Affected units were distributed in the US, Canada, and Panama.

    Product
    Medline convenience kits containing semi-rigid suction liners labeled as follows: NICU ADMIT KIT, Pack Number DYKA1014G
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-3067-2024·2024-09-18

    Dental Composite Resin Recall Due to Red Particulate Contamination

    Ultradent Products recalls Transcend Econo Kit dental composite due to red particulates in the material from a manufacturing issue. Affected lot C1464 was distributed to dental professionals in 34 U.S. states and internationally.

    Product
    Brand Name: Transcend Product Name: Transcend Econo Kit (UB) - Singles Model/Catalog Number: 4817- Software Version: N/A Product Description: Transcend universal composite is a light-cured, tooth shade resin composite material (Bis-GMA-based) to be used for direct and indir
    Category
    Medical Device
    Distribution
    35 states