Recalls
Searchable archive of product recalls from the FDA, USDA FSIS, CPSC, NHTSA, and EPA — translated into plain English, severity-scored from objective criteria, and always linked back to the original government notice.
Every recall on this list has been scored 1–5 against an objective rubric from the agency’s own classification, presence of reported injuries or deaths, distribution scope, and hazard type. The colored severity badge on each card is the score — 5 (Critical) means deaths or serious injuries are reported, 4 (Severe) means significant injury or hospitalization risk, and 3 (High) means a known hazard with no confirmed harm yet. Filter to 3+ (High and above) if you want to skip routine Class-III notices.
The agency chips above control which streams are visible. FDA spans food, drugs, and medical devices. USDA FSIS is meat, poultry, and processed egg products. CPSC is household consumer products. NHTSA is vehicles, tires, and child seats. Nationwide on a card means the recall affects every US state — most do — while a state list means distribution was limited.
Click any recall to see the full summary, affected lot codes and model numbers, the agency’s own classification, and a direct link back to the original government notice for verification.
Minimum severity
Linkbio Corp. is recalling 14 units of LINK SLED Knee System implants due to risk of early aseptic loosening or wear from suboptimal positioning or inadequate cementing. Updated surgical technique training is being issued.
Linkbio Corp. is updating labeling and surgical technique training for the LINK SLED Knee System to prevent early aseptic loosening or excessive wear caused by improper implant positioning or inadequate cementing during surgery.
Linkbio Corp. is recalling 13 units of the LINK SLED Knee System tibial component due to risk of aseptic loosening and increased wear. These risks arise from improper surgical positioning or inadequate cementing technique during implantation.
Siemens Healthcare Diagnostics is recalling 18,961 ADVIA Centaur Cortisol diagnostic kits due to negative bias in urine samples causing intermittently low test results that could affect clinical diagnosis.
Steris surgical light handle covers may detach during use, risking contamination of the sterile field and patient injury. The FDA is recalling approximately 1.4 million affected covers.
Siemens ARTIS pheno angiography systems may misposition the C-arm by 5-10 millimeters when using the reference image positioning function, risking patient and staff crushing injuries. The device may also display inaccurate imaging overlays, potentially causing vessel perforation.
Linkbio Corp. recalls LINK SLED Knee System tibial component due to risks of early aseptic loosening and implant wear from improper surgical positioning or cementing technique.
Linkbio Corp. is recalling 13 units of the LINK SLED Knee Implant All Poly Tibial Component due to risk of early aseptic loosening from suboptimal surgical positioning or inadequate cementing technique. Updated surgical technique guidance is being provided to prevent premature implant failure.
FDA is updating surgical instructions for the LINK SLED Knee System to address early aseptic loosening and increased wear from suboptimal positioning or inadequate cementing technique. Updated training aims to prevent implant failure and unexpected revision surgery.
Linkbio Corp. is recalling the LINK SLED Knee System due to risk of early aseptic loosening and increased wear caused by improper surgical technique or positioning. The issue may require early revision surgery.
A firmware bug in Inpeco laboratory automation modules may cause sample misidentification, leading to incorrect electrolyte test results and potential treatment errors.
Linkbio Corp. is recalling the LINK SLED Knee System tibial component due to risk of aseptic loosening and wear. The recall addresses concerns about suboptimal implant positioning or inadequate cementing technique that could lead to early revision surgery.
Linkbio Corp. is recalling 5 units of the LINK SLED Knee System due to risk of early aseptic loosening or increased wear that could require earlier surgical revision. The recall addresses training and surgical technique to prevent implant failure.
Linkbio Corp. is recalling LINK SLED Knee System tibial components due to risk of early aseptic loosening and increased wear from improper implant positioning or inadequate cementing. Patients may require revision surgery earlier than expected.
The LINK SLED Knee System is recalled due to risk of early aseptic loosening and implant wear caused by suboptimal surgical positioning or inadequate cementing. The manufacturer is updating surgical guidance and providing additional training.
Linkbio Corp. is recalling 15 LINK SLED Knee System implants due to risk of aseptic loosening and wear from improper surgical technique. The company is providing amended surgical guidance and training to prevent implant failure.
A knee implant component is being recalled due to risks of early loosening or increased wear caused by suboptimal implant positioning or inadequate cementing. Manufacturers are providing updated surgical guidance.
Linkbio Corp. is recalling the LINK SLED Knee System's all-poly tibial component due to risk of early aseptic loosening and increased wear from suboptimal implant positioning or inadequate cementing during surgery.
Linkbio Corp. is recalling LINK SLED Knee System implants that may loosen or wear prematurely due to improper surgical positioning or cementing, potentially requiring revision surgery. Updated surgical technique guidance is being provided.
Linkbio Corp. is recalling the LINK SLED Knee System ALL POLY TIBIAL COMPONENT due to risk of early aseptic loosening or increased wear from suboptimal surgical placement or cementing, which may require early revision surgery.
Linkbio Corp. recalls the LINK SLED Knee System due to risk of aseptic loosening from improper positioning or cementing technique, potentially requiring revision surgery. Five units affected in US and international distribution.
Linkbio Corp. is recalling 12 units of the LINK SLED Knee System due to risk of implant loosening and wear that could require revision surgery sooner than expected.
Inpeco laboratory automation systems' firmware can misassociate patient samples, potentially leading to incorrect electrolyte test results. The defect is rare but could cause serious medical consequences if results are misidentified or delayed.
Linkbio Corp. is recalling LINK SLED Knee System prostheses due to risk of early aseptic loosening or increased wear caused by suboptimal surgical technique. The company is providing amended surgical guidelines and training.
Inpeco laboratory automation systems have a firmware defect that may cause sample ID mis-association, leading to incorrect test results for electrolyte measurements. Potential consequences include abnormal treatment decisions and serious health complications.